4
votes
1answer
177 views

5 speed cassette on 8 speed hub

I just picked up a cheap wheelset to replace the wheels on a vintage bike. The old bike had a 5 speed freewheel (I think. The model printed on it is shimano-ug). The new rear hub is a shimano fh-rm30 ...
4
votes
2answers
129 views

How to prevent freehub body damage?

I feel like this is poor design. I have two wheelsets that are less than a year old which have damaged freehub bodys due to cogs digging in to the splines on the freehub. It's so bad that I can't ...
0
votes
1answer
185 views

What Changed with Shimano Hyperglide-C?

Shimano's HyperGlide-C (11-speed), are the hubs backwards compatible? Can I put an 8/9/10-speed cassette on a Hyperglide-C hub? Can I put a Hyperglide-C cassette on a Hyperglide hub?
3
votes
1answer
292 views

Can i use a 10 speed hubbed wheel on my 7 speed/cassette bike?

I ride a 2005 Claud Butler San Remo with a Sora 7 cassette on the back. My back wheel has broke and is not repairable and I have bought an Ambrosio WS23 Wheel (700mm) with Bianchi hubs which I believe ...
4
votes
1answer
387 views

Should cassette “wiggle”

Recently My freehub broke and so I removed the cassette to replace the freehub and noticed, whilst off the bike, 4 of the remaining bolted together 8 sprockets wiggled (4 wiggled together but ...
5
votes
1answer
117 views

Can I replace a 9spd freehub with a 7spd one?

On my commute this morning I established that my freehub needs replacing. There's obviously something wrong with the ratchet mechanism, because it intermittently refuses to engage. My existing setup ...
3
votes
1answer
206 views

Am I going to do any damage by swapping cassettes frequently?

I've got a separate wheelset for cylocross riding and road riding. Would it be detrimental to the life of my cassette or hubs If I swapped the cassette between my road and off-road wheelset ...
5
votes
6answers
7k views

7-speed MTB cassette on 8/9-speed wheel hub, where does spacer go?

Sheldon Brown says "Add a 4.5 mm spacer before installing a 7-speed cassette on an 8-, 9-, or 10-speed hub", but doesn't seem to show spacer placement in any picture. My direct experience is that the ...