I have an old mavic race rear wheel where the hub is rusted, but the spokes and rim is in prime condition. Thinking about changing just the hub (reusing spokes) to a fixed flip-flop to use the wheel ...
I just picked up a cheap wheelset to replace the wheels on a vintage bike. The old bike had a 5 speed freewheel (I think. The model printed on it is shimano-ug). The new rear hub is a shimano fh-rm30 ...
I have an old wheelset with a 16T cog. It's currently a 120mm flipflop hub, and I'm going to be replacing it with a 120mm coaster. The coaster hub that I want doesn't come with a 16T cog (only 14, 15 ...
I'm converting my old favorit bicycle to a fixie, but the hub is obviously not made for a fixed gear cog. I've removed the freewheel (not sure if it's called that, the thing that spins backwards on ...
i have an se dirt jumper with 4 sealed bearings in the rear hub, can i convert it from QR to solid axle?
i dont want the quick release for single speed, i want to ditch the skewer for a solid axle to torque it down good for single speed... my LBS mechanic said they couldnt do it but with sealed bearings ...
I want to convert my fixed gear 700c bike (raleigh rush hour) to coaster break bike. Can anyone recomend the best way to do this. Can anyone recomend a good coaster rear hub or coaster rear wheel?