Suppose I have a 120mm hub with a long axle, that I want to mount in a frame with 130mm dropouts. In principle, it seems to me that this should be fine, but I want to confirm this. One immediate issue ...
I inherited a bike with a Sturmey Archer 3 speed hub (Sturmey Archer AW, from 1984). I am very familiar with free-wheels and cassete hubs, but this is fairly new to me, although I did some research ...
http://www.philwood.com/products/hubspgs/rohldisc.php As far as I can figure it is for people with Rohloff-equipped touring bikes so that they have the same rotor bolt pattern on their front and rear ...
I would like to buy a single-speed bike that happens to have 120mm hub spacing, and add the Shimano Alfine 8-speed hub. That hub, however, seems to have a 135mm spacing. Can the 8-speed Alfine hub be ...
I'm about to go look at a 1972 Raleigh. The seller says that the bike slips out of third gear into neutral. Is this a simple fix (e.g. a cable adjustment), or should I stay away from such a ...
What's the efficiency of hub gears compared to derailleurs. I know that hub gears are not as efficient, a part from being heavier, how much will I loose in performance if I use hub gear?