Tagged Questions
4
votes
1answer
134 views
Should cassette “wiggle”
Recently My freehub broke and so I removed the cassette to replace the freehub and noticed, whilst off the bike, 4 of the remaining bolted together 8 sprockets wiggled (4 wiggled together but ...
2
votes
1answer
765 views
How do I clean the inside of a freehub?
I didn't know any better and I let degreaser drip into the freewheel body of my Shimano FH-RM65. Now it makes a terrible retching noise when it rotates.
How do I clean the inside of this thing?
...
2
votes
3answers
3k views
What tool is needed to remove a Shimano HG-50 freewheel?
What tool is needed to remove a Shimano HG-50 freewheel from the wheel hub? It looks like a 12mm or 13mm Allen key. Will this do it or is there some detail I have missed?
4
votes
5answers
4k views
7-speed MTB cassette on 8/9-speed wheel hub, where does spacer go?
Sheldon Brown says "Add a 4.5 mm spacer before installing a 7-speed cassette on an 8-, 9-, or 10-speed hub", but doesn't seem to show spacer placement in any picture. My direct experience is that the ...
5
votes
4answers
1k views
Trouble getting the right cup and cone hub adjustment
I have a pair of Shimano XT wheels and recently had issues with the hub on the rear wheel requiring new cones and bearings. These were fitted carefully but I've had issues getting the right adjustment ...
10
votes
3answers
3k views
do DT Swiss 240 hubs need proprietary tools to maintain them?
the bearings in my DT Swiss 240 hub appear to be shot, I have the toolkit for and am used to maintaining Chris King hubs but I wonder if I have to get special proprietary tools for the DT hubs as ...
12
votes
5answers
9k views
How often should I grease and repack my hubs and bottom bracket?
I am commuting 7 miles a day (round trip) in all weather in New England (temperate, moderately wet climate, cold winters). Overall I am putting about 1000 miles per year on my commuter bike, a 2009 ...
