Concerning the parts and mechanism of bike gearing, both internal and external. Multi-speed, single-speed, fixed and freewheel.

learn more… | top users | synonyms

0
votes
0answers
43 views

What does the rear hub sound mean, is it efficiency or the more the noise the better? [duplicate]

a friend of mine told me the larger the sound the better, is he right or the sound is just energy loss so not a good thing
1
vote
0answers
23 views

What is the length of the Hope XC internal spacer from freehub to bearing?

I think I have a worn spacer as it has ragged edges. Does anyone have the length of this spacer when new?
1
vote
2answers
84 views

Hub sticking - friction

Bike I got used and happy with the price for frame alone but I don't know the history. Kris King hub with significant drag. With cassette off and just a rim if spin it hard I get 5 revolutions. I ...
0
votes
3answers
299 views

Can't remove lockring

Have been trying to get the lockring removed from my cassette so I can replace it with a spacer kit and one sprocket (singlespeed conversion). I managed to get it loose, although the wrong way - so ...
1
vote
1answer
118 views

Hubs compatible with 7 speed cassette

I have one Gt aggressor 2.0 2014 and want to make some upgrade. So someone told me to buy a new hub to use with a 9 speed cassette. I want to buy the hub but later the 9v cassette, so has any hub can ...
3
votes
4answers
5k views

sealed hubs vs normal hubs

My lbs recommended sealed hubs to me. Here are my doubts. Seeing as how I never ride in the rain or any such wet substances, I don't really need the "sealed" feature. Sheldon Brown says that if ...
0
votes
1answer
180 views

Axle to wheel bore ratio? [closed]

This may be the wrong site but it's the closest one I thought someone would have knowledge of the question... It's not for a bike but rather replacing the wheels on a power wheels... The axle is ...
1
vote
2answers
114 views

Is this hub shot?

While inspecting a used road bike ($200) I pulled the rear wheel off to check the hub. I twisted the axle to see if there was any damage. It wasn't at all difficult to turn it, but there was a bit of ...
0
votes
2answers
63 views

Trek T-900 Tandem rear hub

I have a Trek T-900 tandem that I bought used. It's probably about 12 or 13 years old. I'm having some rear hub issues with it, but I can't identify what hub it is. Trek's website and other ...
2
votes
2answers
891 views

Do DC HUB Motors For Electric Bikes use regenerative braking?

Or do I need a special control circuit aside from the included electronics?
2
votes
1answer
242 views

Continuing to use damaged cones in rear hub?

I've read in many different places that if you take a hub apart and see damage on the cups, cones, or bearings (may god have mercy on you if your cups are damaged) That they must be replaced. I ...
1
vote
3answers
528 views

My back wheel isn't connected to the gears

I have an old bike it says Via Montega on the body if that helps. I was ridding it earlier when the peddling stopped resulting in forward motion. I thought the chain might have come loose but it is ...
0
votes
2answers
1k views

Why does my chain slip off the chainring when cruising or back pedalling?

My bike is a little more then a year old (although I do put a lot of miles on it, about 12 miles a day), this problem seems to have started about a week ago. It's a 7 speed Avilon Next (a cheap brand ...
2
votes
2answers
153 views

Replace hub from old cassette to new fixed

I have an old mavic race rear wheel where the hub is rusted, but the spokes and rim is in prime condition. Thinking about changing just the hub (reusing spokes) to a fixed flip-flop to use the wheel ...
2
votes
1answer
598 views

Why does coaster brake hub growl when coasting but not when braking or pedaling?

I have an old two-seater recumbent trike with coaster brakes. One of the rear hubs rumbles terribly when the bike is coasting. When the brake is on, or when pedaling, it doesn't make a noise. I assume ...
1
vote
1answer
725 views

Shimano Claris FH-2400 Rear Hub Dimensions

I would like to purchase this hub, rim and suitable spokes, but I am not able to find dimensions of this hub necessary to calculate spoke size. I have checked usual places where such information can ...
1
vote
2answers
99 views

Loose Hub on front wheel

Front wheel hub is loose and the whole thing wobbles a bit. Im a fan of dubstep but there's a little too much wubwub in my hub. How do I tighten that bad boy up properly? Thanks!
5
votes
9answers
7k views

Is there such thing as a freewheel that doesn't click?

The clicking sound of the freewheel on my singlespeed when it's coasting is annoying for me, so I flipped over my back wheel and rode fixed for a few months in blissful silence. But having to pedal ...
4
votes
1answer
1k views

Reoccurring Bent Axles, any reasons or upgrades?

Earlier this month I had a issue with a broken axle. It was the original that was sold with the bike and lasted around 5,000 miles. I went to my LBS and bought a new axle (unbranded, labeled, etc, ...
5
votes
2answers
467 views

Hub grease, white grease, red grease or buy grease?

As i'm going to overhaul my hubs, i'm looking for the right grease for the job. The easy way would be going to a shop and buy some dedicated grease. But searching through my garage, I found that i ...
2
votes
1answer
97 views

Why front hub axle sticks/freezes when riding extreme downhill

My front hub axle has already frozen when riding extreme downhill. Looking at the hub, it looks like the right hand cone has self-tightened. Can you explain why this happens, and how to fix it?
3
votes
1answer
265 views

Lots of broken spokes on one bike, with different wheels

I have a commuting bike I've had for a few years, and as long as I've had it it's frequently broken spokes on the front wheel. Eventually I got sick of replacing them, put it down to a bad wheel, and ...
5
votes
2answers
2k views

How to prevent freehub body damage?

I feel like this is poor design. I have two wheelsets that are less than a year old which have damaged freehub bodys due to cogs digging in to the splines on the freehub. It's so bad that I can't ...
0
votes
1answer
192 views

Choosing hubs and rims for training road wheels

I'm going to build a training road wheelset for my touring bike. I wonder what should be criteria for choosing hubs and rims and spokes. I'd prefer cheaper options as long as they are durable and not ...
2
votes
1answer
744 views

Why is it important to keep bearing sets when greasing a campagnolo hub?

In almost all cases where hubs are regularly serviced, bearings don't need to be replaced. The general consensus though is to replace bearings after so many thousands of kms. Many posts on the web say ...
2
votes
2answers
111 views

What can be done to fix a hub that has come apart?

I noticed recently that my rear tyre was rubbing on the frame when I was pedalling hard; the wheel had a bit of horizontal play in it, so I thought the cones might need tightening. Anyway, I left it ...
0
votes
3answers
242 views

Rear hub for randonneuring - any “classic” model?

I have recently had a failure in my rear-hub during a brevet. The bike I use for brevets was assembled from used parts, and I tried to choose components that are dedicated to randonneuring ...
14
votes
6answers
33k views

How often should I grease and repack my hubs and bottom bracket?

I am commuting 7 miles a day (round trip) in all weather in New England (temperate, moderately wet climate, cold winters). Overall I am putting about 1000 miles per year on my commuter bike, a 2009 ...
2
votes
1answer
393 views

What parameters are important when replacing a rear hub?

My rear hub is damaged. I have not yet inspected the source of the damage, but the wheel is moving sideways when rotating (a LOT), plus I rode it like this for about 35km. Therefore, I find it ...
4
votes
1answer
342 views

Should I repack the hub bearings on new wheels with quality grease?

The wheels in question are inexpensive ($100/pair) alloy wheels. If the answer is "yes", do you have an recommendations for grease? Currently I'm using "Finish Line Grease with Teflon" for most of my ...
0
votes
1answer
153 views

Wobbling on Shimano Nexus 8

My rear wheel has a Shimano nexus 8 internal gear shift. i noticed some wobbling on the axis recently. that means there is a little bit of play when i try to twist the axis sideways respective to the ...
2
votes
2answers
382 views

Should I force an 130 mm hub into my old vintage alu frame

I have a classic vitus 979 aluminium road frame where the rear dropout width is 126 mm. Most of the things I hear is that you should not use force on an alu frame and try to fit in an 130 mm hub in ...
1
vote
2answers
880 views

Adjusting over locknut distance with spacers

I'm trying to adapt a 130mm over locknut distance (OLD) hub to a 135mm OLD frame. Sheldon Brown suggests that I can just add in spacers between the cones and the locknuts. Sheldon doesn't say, ...
2
votes
1answer
379 views

Can I mount a wheel with a narrow hub to a wide frame?

Suppose I have a 120mm hub with a long axle, that I want to mount in a frame with 130mm dropouts. In principle, it seems to me that this should be fine, but I want to confirm this. One immediate issue ...
0
votes
1answer
1k views

What Changed with Shimano Hyperglide-C?

Shimano's HyperGlide-C (11-speed), are the hubs backwards compatible? Can I put an 8/9/10-speed cassette on a Hyperglide-C hub? Can I put a Hyperglide-C cassette on a Hyperglide hub?
0
votes
1answer
100 views

Sram T3 cracks when pedaling, but it works, in all three gears.The bike is three years in use

My rear hub SRAM T3 cracks when pedaling, but it works, in all three gears.The bike is three years in use.What shoud be done, and how urgent is the problem? I think it's something with the rear hub ...
4
votes
2answers
572 views

Phil Wood Hubs: Anyone had a Pawl go?

I got front & rear Phil Wood hubs for a touring setup back in Oct of 2011. I'd been using them for commuting to work -- averaging 20 KM a day. Except I'd been off the bike for the month of ...
2
votes
2answers
168 views

Will riding cobblestones and rough streets kill my cup and cone hubs?

I live in pittsburgh, and we have some hills and streets which are belgian block, brick, poorly paved and pocked with potholes. It can be very jarring, but I still find myself flying down these ...
1
vote
1answer
391 views

How much “play” is normal in a Sturmey Archer 3 speed hub?

I inherited a bike with a Sturmey Archer 3 speed hub (Sturmey Archer AW, from 1984). I am very familiar with free-wheels and cassete hubs, but this is fairly new to me, although I did some research ...
1
vote
1answer
542 views

Adaptor for 20mm Shimano saint 810 hub to 15mm?

Currently I'm running a Shimano Saint 810 front hub and fork Lyrik coil 20mm. I've a good offer on a brand new Manitou Mattoc 2014. But this fork uses 15mm axle. I'm looking for an adapter to be able ...
3
votes
1answer
178 views

Overhauled hubs: still some noise

I've just, for the first time, finished servicing the hubs on my bicycle. They are of the cup & cone type (Shimano). The cones of the front hub where pitted so I got them replaced, along with the ...
2
votes
2answers
4k views

Can I swap a shimano free hub body for a campag one and be able to attach it to the existing Deore hub?

I want to convert my Surly Cross Check into a Campagnolo set up. The problem I am having is i have Shimano Deore Hubs on Mavic rims at present. I would rather not buy new wheels, so I am looking at ...
1
vote
2answers
1k views

What causes a wheel to seize?

My rear fixed-gear wheel seized up yesterday on my commute home. I suspect it's the result of my bone-headed adjustment after replacing a broken locknut on the axle (I may not have put the new ...
2
votes
1answer
434 views

Why is my Hope XC freehub locking when the quick release is tightened?

Recently I found that the freehub on my Hope XC rear hub won't rotate, but only when the wheel is in the bike and the quick release is tightened. I've removed the freehub (which slides off easily), ...
2
votes
1answer
475 views

Finding Correct Size Wheel for Bike

I am looking to replace the stock wheelset on my 2009 Jamis Aurora. I'm looking to replace wheels because I have a number of spokes break over the wheel lifetime and now my rear wheel is only in true ...
0
votes
1answer
657 views

Shimano rear hub body compatibility

My free hub body has cracked and im looking to replace it. I have discovered it uses a 14mm hex key to remove. I cannot find a freehub body for sale that matches m785. Will a "m760-m765" body fit my ...
4
votes
2answers
12k views

How to set up bike so that back-pedalling stops the rear wheel?

My first bike was a 1976 Raleigh Strika. It was brilliant and was distinguished by having only a front brake lever. To get the rear wheel to stop one simply back-pedalled. This was a v. efficient way ...
1
vote
1answer
3k views

How do I install a fixed gear cog on a screw-on freewheel hub?

I'm converting my old favorit bicycle to a fixie, but the hub is obviously not made for a fixed gear cog. I've removed the freewheel (not sure if it's called that, the thing that spins backwards on ...
0
votes
1answer
936 views

Are shimano FH-2200 hubs strong enough to use in a tubular wheel for CX racing?

I have a pair of Shimano FH-2200 front and rear hubs lying around which I no longer use and I would like to save money by using them for a wheel build but am unsure whether they would be up to the ...
2
votes
1answer
3k views

Replacing rear hub, beginners advice required

I have a Trek 1.5 2011 compact road bike that I abused a bit too much over winter. The rear hub has quite a lot of sideways play on it and I am buying the tools needed to hopefully fix this. My ...