Concerning the parts and mechanism of bike gearing, both internal and external. Multi-speed, single-speed, fixed and freewheel.

learn more… | top users | synonyms

3
votes
1answer
79 views

Do new hubs need to be adjusted prior to use

Do new hubs usually come adjusted, or one needs to adjust them prior to use. I have a new Shimano Claris hub, and it does not seem to be as smooth rolling as my previous Tiagra hub. Should I try to ...
3
votes
4answers
5k views

sealed hubs vs normal hubs

My lbs recommended sealed hubs to me. Here are my doubts. Seeing as how I never ride in the rain or any such wet substances, I don't really need the "sealed" feature. Sheldon Brown says that if ...
3
votes
2answers
165 views

How does this hub come apart?

Really, I have two questions. But first, I see no place to put a wrench on this hub. Well, there is one small notch on one side on the dust cap (on the other side). How do I get this hub apart? It's ...
3
votes
2answers
12k views

How did my rear freewheel become incredibly tight overnight?

I got a flat yesterday morning after a normal ride, walked my bike inside the house and propped it upside-down (like this) overnight. This morning, I changed the flat and put on some brand new tires ...
3
votes
3answers
12k views

What tool is needed to remove a Shimano HG-50 freewheel?

What tool is needed to remove a Shimano HG-50 freewheel from the wheel hub? It looks like a 12mm or 13mm Allen key. Will this do it or is there some detail I have missed?
3
votes
2answers
73 views

What speed is my Shimano Nexus 8 Hub in?

I made a mistake when changing a flat. I didn't have it in 4th speed. When I was changing the flat I shifted it for more give on the shifter cable >_< . Now my shifter says 4 and I don't known what ...
3
votes
1answer
251 views

Am I going to do any damage by swapping cassettes frequently?

I've got a separate wheelset for cylocross riding and road riding. Would it be detrimental to the life of my cassette or hubs If I swapped the cassette between my road and off-road wheelset ...
3
votes
3answers
3k views

Can I lace my hub with all inward or outward facing spoke heads?

It seems conventional wisdom says to alternate inward vs outward spoke heads going around the flange when lacing a wheel, like this: However, I'm wondering what the reason for this is, and if it ...
3
votes
1answer
607 views

Does Enduro make a ceramic hybrid wheel bearing kit for WTB Laser Disc Lite hubs?

I would like to replace the bearings in my front and rear WTB Laser Disc Lite hubs. I'm interested in upgrading the OEM steel bearings to a ceramic hybrid. I've hear that Enduro is a quality ...
3
votes
1answer
90 views

Wheel building for n360 + disc brakes on H Plus Son 700c, 36h

I'm working on building a couple of wheels for a road/commuter bike. This is my first wheel building endeavor. I have: 2 H Plus Son 700c, 36 hole wheels A Nuvinci n360, 2012 model A set of TRP Hylex ...
3
votes
1answer
265 views

Lots of broken spokes on one bike, with different wheels

I have a commuting bike I've had for a few years, and as long as I've had it it's frequently broken spokes on the front wheel. Eventually I got sick of replacing them, put it down to a bad wheel, and ...
3
votes
1answer
178 views

Overhauled hubs: still some noise

I've just, for the first time, finished servicing the hubs on my bicycle. They are of the cup & cone type (Shimano). The cones of the front hub where pitted so I got them replaced, along with the ...
2
votes
2answers
382 views

Should I force an 130 mm hub into my old vintage alu frame

I have a classic vitus 979 aluminium road frame where the rear dropout width is 126 mm. Most of the things I hear is that you should not use force on an alu frame and try to fit in an 130 mm hub in ...
2
votes
3answers
3k views

practical pro and contra for Nuvinci CVT especially for hilly terrain

I'm thinking of buying new bike next year, most probably combo for exercise & commuting in summer. Since terrain is relatively hilly here and both fixed city-bike and casual combo with 3x7 gears ...
2
votes
1answer
71 views

What is this cogset body?

I have some backlash (free movement) in my body of cogset, so I try to dissemble my cogset to discover this weird body: I'm trying to find a new one but I don't know how to call it. Any idea how ...
2
votes
1answer
491 views

How to grease a hub?

I have a question about hub, When should I grease my hub ? every 20000 km ? How do I know it needs new grease ? Because I can not see if the grease is dry or not...? Thanks
2
votes
1answer
97 views

Why front hub axle sticks/freezes when riding extreme downhill

My front hub axle has already frozen when riding extreme downhill. Looking at the hub, it looks like the right hand cone has self-tightened. Can you explain why this happens, and how to fix it?
2
votes
2answers
112 views

What can be done to fix a hub that has come apart?

I noticed recently that my rear tyre was rubbing on the frame when I was pedalling hard; the wheel had a bit of horizontal play in it, so I thought the cones might need tightening. Anyway, I left it ...
2
votes
2answers
4k views

Can I swap a shimano free hub body for a campag one and be able to attach it to the existing Deore hub?

I want to convert my Surly Cross Check into a Campagnolo set up. The problem I am having is i have Shimano Deore Hubs on Mavic rims at present. I would rather not buy new wheels, so I am looking at ...
2
votes
2answers
2k views

Planning on building a fixed-gear/single-speed from an old Schwinn World. What new parts will I need?

I think I want a flip flop hub, to keep my options open. If I get one off amazon, do I need to buy a freewheel and fixed-gear cog as well, or will those come with the hub? Also, does the hub have to ...
2
votes
3answers
2k views

What's wrong with my rear wheel? Wheel moves about 1/4" front to back when brake is fully applied, cassette seems a bit wobbly, some rubbing noise

I first started inspecting my wheel because I noticed when I applied my brake while not riding, I could push my rear end and the wheel would turn forward and back about 1/4"-1/2" each way (but the ...
2
votes
1answer
542 views

Suspension Fork Axles

I'm looking to upgrade my suspension forks from Rock Shox Dart 3 to something like Rock Shox Sektor RL. A lot of the forks have either a 15 or 20 mm axle, or 'Maxle'. What does this mean? Will this ...
2
votes
1answer
2k views

Can I replace steel bearings with ceramic bearings?

I'm using WH-550 from Shimano, can I replace my steel bearing balls with ceramic bearing balls?
2
votes
1answer
747 views

Why is it important to keep bearing sets when greasing a campagnolo hub?

In almost all cases where hubs are regularly serviced, bearings don't need to be replaced. The general consensus though is to replace bearings after so many thousands of kms. Many posts on the web say ...
2
votes
2answers
168 views

Will riding cobblestones and rough streets kill my cup and cone hubs?

I live in pittsburgh, and we have some hills and streets which are belgian block, brick, poorly paved and pocked with potholes. It can be very jarring, but I still find myself flying down these ...
2
votes
1answer
475 views

Finding Correct Size Wheel for Bike

I am looking to replace the stock wheelset on my 2009 Jamis Aurora. I'm looking to replace wheels because I have a number of spokes break over the wheel lifetime and now my rear wheel is only in true ...
2
votes
1answer
469 views

What is this point of this Phil Wood “Rohloff Disc Rotor Compatible Hub”?

http://www.philwood.com/products/hubspgs/rohldisc.php As far as I can figure it is for people with Rohloff-equipped touring bikes so that they have the same rotor bolt pattern on their front and rear ...
2
votes
1answer
97 views

Missing lock nut part

Not sure what to call it, but a couple of my wheels are missing the grippy washer thing that sits on the lock nut. They seem to be attached to the lock nut to begin with, but they just fall off after ...
2
votes
2answers
893 views

Do DC HUB Motors For Electric Bikes use regenerative braking?

Or do I need a special control circuit aside from the included electronics?
2
votes
1answer
379 views

Can I mount a wheel with a narrow hub to a wide frame?

Suppose I have a 120mm hub with a long axle, that I want to mount in a frame with 130mm dropouts. In principle, it seems to me that this should be fine, but I want to confirm this. One immediate issue ...
2
votes
1answer
200 views

Fixed gear conversion - hub spacers

I am converting my 80s steel peugeot to a fixed gear. I have purchased most of the parts an had a wheel built onto a SS hub. Now, SS hubs are narrower than road hubs - 120mm vs 130mm (although I ...
2
votes
1answer
405 views

Has Shimano produced Ultegra 600 Hub Set, 32 hole?

I found this item at an online shop, but can not find infomation about this product. Anyone knows this hub set? and any review infomation available there?
2
votes
1answer
580 views

What hub to purchase for a GT aggressor?

I have a GT Aggressor 1.0 Specs here: http://www.gtbicycles.com/2013/bikes/mountain/trail/aggressor-1-0 Recently on a long ride, the crank started to roll freely after a long downhill. i.e. when ...
2
votes
1answer
740 views

stiff gears and chain coming off while pedalling forward (hub gear)

So I recently replaced the back wheel's tyre on my bike. Got it all fitted back on again, and the chain and everything are in place as they should be. However, changing up gears has become very stiff ...
2
votes
2answers
2k views

What's the cone wrench size?

What's the cone spanner size for cone nut on Shimano WH-R550 Front wheel ? Is it 17mm or 18mm ? I tried with 16, it seems, need more, 1 or 2mm bigger. Thanks
2
votes
1answer
104 views

Is it usual for a freehub to have play? [duplicate]

I have a new rear wheel (Shimano Ultegra WH-6800) and the freehub has about 1mm-2mm of play in it. When the cassette is installed and the wheel is on the bike I'm getting a lot of wobble which is ...
2
votes
1answer
180 views

Rear wheel doesn't turn with cassette

I just got a used mountain bike and on my first trip my rear wheel stopped turning with the cassette. When I pedal it turns the cassette and the gears still change smoothly but it doesnt turn the rear ...
2
votes
2answers
92 views

Can an imperfect hub make a disc rotor rub?

I had a 160mm disc rotor on a road bike that was rubbing a bit in one spot, not severely, but enough for me to notice. I've tried to true it a few times over the past couple months with little ...
2
votes
2answers
270 views

Will two spacers between the cassette and the hub effect the chain line?

So I have a set of custom wheels (White Industries T11 hubs) and when the cassette is correctly fastened to the hub with the single spacer provided the cassette cogs can be moved in the direction ...
2
votes
1answer
243 views

Continuing to use damaged cones in rear hub?

I've read in many different places that if you take a hub apart and see damage on the cups, cones, or bearings (may god have mercy on you if your cups are damaged) That they must be replaced. I ...
2
votes
1answer
393 views

What parameters are important when replacing a rear hub?

My rear hub is damaged. I have not yet inspected the source of the damage, but the wheel is moving sideways when rotating (a LOT), plus I rode it like this for about 35km. Therefore, I find it ...
2
votes
1answer
434 views

Why is my Hope XC freehub locking when the quick release is tightened?

Recently I found that the freehub on my Hope XC rear hub won't rotate, but only when the wheel is in the bike and the quick release is tightened. I've removed the freehub (which slides off easily), ...
2
votes
1answer
463 views

Unknown freehub, trying to source

I have a neighbours daughters bike to fix at the moment. The freehub is totally seized. I've removed the freehub from the hub itself, but can't identify it nor have I see any like it. It doesn't have ...
2
votes
1answer
3k views

Replacing rear hub, beginners advice required

I have a Trek 1.5 2011 compact road bike that I abused a bit too much over winter. The rear hub has quite a lot of sideways play on it and I am buying the tools needed to hopefully fix this. My ...
2
votes
0answers
44 views

Can you identify this Sachs hub?

I recently picked this up along with a couple of old wheels. I don't know it's age or history. I've only got as far as identifying it as a Sachs. There are no other markings apart from the logo ...
2
votes
2answers
153 views

Replace hub from old cassette to new fixed

I have an old mavic race rear wheel where the hub is rusted, but the spokes and rim is in prime condition. Thinking about changing just the hub (reusing spokes) to a fixed flip-flop to use the wheel ...
2
votes
1answer
599 views

Why does coaster brake hub growl when coasting but not when braking or pedaling?

I have an old two-seater recumbent trike with coaster brakes. One of the rear hubs rumbles terribly when the bike is coasting. When the brake is on, or when pedaling, it doesn't make a noise. I assume ...
1
vote
3answers
4k views

Can a (relative) beginner adjust spacing on a 501 cromo road frame?

Have acquired a cheap old Peugeot road bike from ebay; nice cromo frame, but it needs a new rear wheel and unfortunately I didn't check the dropout size before buying. It has an OLD of ~120mm, but I ...
1
vote
1answer
118 views

Hubs compatible with 7 speed cassette

I have one Gt aggressor 2.0 2014 and want to make some upgrade. So someone told me to buy a new hub to use with a 9 speed cassette. I want to buy the hub but later the 9v cassette, so has any hub can ...
1
vote
1answer
192 views

Repairing a damaged cone nut

So I've got a nice hybrid bike that I picked up secondhand, was doing some maintenance on it to get it up and running and thought I'd replace the bearings in the rear axle. In doing this, I've found ...