Concerning the parts and mechanism of bike gearing, both internal and external. Multi-speed, single-speed, fixed and freewheel.

learn more… | top users | synonyms

4
votes
5answers
6k views

7-speed MTB cassette on 8/9-speed wheel hub, where does spacer go?

Sheldon Brown says "Add a 4.5 mm spacer before installing a 7-speed cassette on an 8-, 9-, or 10-speed hub", but doesn't seem to show spacer placement in any picture. My direct experience is that the ...
4
votes
2answers
376 views

Phil Wood Hubs: Anyone had a Pawl go?

I got front & rear Phil Wood hubs for a touring setup back in Oct of 2011. I'd been using them for commuting to work -- averaging 20 KM a day. Except I'd been off the bike for the month of ...
2
votes
2answers
107 views

Will riding cobblestones and rough streets kill my cup and cone hubs?

I live in pittsburgh, and we have some hills and streets which are belgian block, brick, poorly paved and pocked with potholes. It can be very jarring, but I still find myself flying down these ...
1
vote
1answer
231 views

How much “play” is normal in a Sturmey Archer 3 speed hub?

I inherited a bike with a Sturmey Archer 3 speed hub (Sturmey Archer AW, from 1984). I am very familiar with free-wheels and cassete hubs, but this is fairly new to me, although I did some research ...
1
vote
1answer
72 views

Adaptor for 20mm Shimano saint 810 hub to 15mm?

Currently I'm running a Shimano Saint 810 front hub and fork Lyrik coil 20mm. I've a good offer on a brand new Manitou Mattoc 2014. But this fork uses 15mm axle. I'm looking for an adapter to be able ...
3
votes
2answers
218 views

Cause of spalled cones?

Was getting a sort of rubbing sound from my front wheel, like rubbing brakes, but the sound continued even with the bridal loose. So I disassembled my front hub. Everything looked good until I got ...
3
votes
1answer
161 views

Overhauled hubs: still some noise

I've just, for the first time, finished servicing the hubs on my bicycle. They are of the cup & cone type (Shimano). The cones of the front hub where pitted so I got them replaced, along with the ...
2
votes
2answers
87 views

Can I swap a shimano free hub body for a campag one and be able to attach it to the existing Deore hub?

I want to convert my Surly Cross Check into a Campagnolo set up. The problem I am having is i have Shimano Deore Hubs on Mavic rims at present. I would rather not buy new wheels, so I am looking at ...
1
vote
2answers
139 views

What causes a wheel to seize?

My rear fixed-gear wheel seized up yesterday on my commute home. I suspect it's the result of my bone-headed adjustment after replacing a broken locknut on the axle (I may not have put the new ...
2
votes
1answer
208 views

Why is my Hope XC freehub locking when the quick release is tightened?

Recently I found that the freehub on my Hope XC rear hub won't rotate, but only when the wheel is in the bike and the quick release is tightened. I've removed the freehub (which slides off easily), ...
2
votes
1answer
218 views

Finding Correct Size Wheel for Bike

I am looking to replace the stock wheelset on my 2009 Jamis Aurora. I'm looking to replace wheels because I have a number of spokes break over the wheel lifetime and now my rear wheel is only in true ...
0
votes
1answer
69 views

Shimano rear hub body compatibility

My free hub body has cracked and im looking to replace it. I have discovered it uses a 14mm hex key to remove. I cannot find a freehub body for sale that matches m785. Will a "m760-m765" body fit my ...
4
votes
2answers
5k views

How to set up bike so that back-pedalling stops the rear wheel?

My first bike was a 1976 Raleigh Strika. It was brilliant and was distinguished by having only a front brake lever. To get the rear wheel to stop one simply back-pedalled. This was a v. efficient way ...
1
vote
1answer
152 views

How do I install a fixed gear cog on a screw-on freewheel hub?

I'm converting my old favorit bicycle to a fixie, but the hub is obviously not made for a fixed gear cog. I've removed the freewheel (not sure if it's called that, the thing that spins backwards on ...
2
votes
1answer
693 views

What's wrong with my rear wheel? Wheel moves about 1/4" front to back when brake is fully applied, cassette seems a bit wobbly, some rubbing noise

I first started inspecting my wheel because I noticed when I applied my brake while not riding, I could push my rear end and the wheel would turn forward and back about 1/4"-1/2" each way (but the ...
0
votes
1answer
103 views

Are shimano FH-2200 hubs strong enough to use in a tubular wheel for CX racing?

I have a pair of Shimano FH-2200 front and rear hubs lying around which I no longer use and I would like to save money by using them for a wheel build but am unsure whether they would be up to the ...
2
votes
1answer
279 views

Replacing rear hub, beginners advice required

I have a Trek 1.5 2011 compact road bike that I abused a bit too much over winter. The rear hub has quite a lot of sideways play on it and I am buying the tools needed to hopefully fix this. My ...
1
vote
2answers
122 views

Which spokes should I get for an Expresso Coaster Brake with a Velocity Deep V 700c

I'm working on my first coaster project with an old 700c frame which I want to make really clean using an Espresso Coaster Hub. http://www.espressowheels.com/griptape.html Rear black coaster brake ...
2
votes
1answer
212 views

Lock nuts on new hubs seem strangely tight, but can't seem to loosen them. Any advice?

As part of a new build I'm working on, I just had some wheels built up. The hubs are large flanged Miche Primatos with a double-sided fixed wheel. The rear wheel, straight out the box, seemed weirdly ...
2
votes
2answers
103 views

How does this hub come apart?

Really, I have two questions. But first, I see no place to put a wrench on this hub. Well, there is one small notch on one side on the dust cap (on the other side). How do I get this hub apart? It's ...
1
vote
1answer
98 views

Need replacement cones for Shimano front hub

I am rebuilding a Shimano HB-M475 front hub, but having trouble finding the replacement cones. This one has the M9 axle, but all of the replacement cones I have found are for a M10 axles. I need to ...
2
votes
1answer
226 views

Unknown freehub, trying to source

I have a neighbours daughters bike to fix at the moment. The freehub is totally seized. I've removed the freehub from the hub itself, but can't identify it nor have I see any like it. It doesn't have ...
1
vote
1answer
113 views

Can a bent hub damage my fork?

I've recently noticed that my front hub is bent, or at least the parts that connect to the fork (any name for this?). It's not a huge bent, but it's clearly visible with your eyes. It fits the fork ...
0
votes
4answers
553 views

Is there 28 hole front/rear drum brake hub

No time research this now, so has there ever been made a 28 hole front or rear drum brake hub? I know that Sachs and Sturmey-Archer have done a lot of drum brakes. Neither to my knowledge have such a ...
1
vote
0answers
87 views

What to upgrade on a Raleigh MV7? 20"

I am undecided to upgrade the BB and crank or change a wheelset. Any advice on what might help me spend less effort pedaling? I actually find a steel 26" MTB easier to pedal.
2
votes
1answer
85 views

Fixed gear conversion - hub spacers

I am converting my 80s steel peugeot to a fixed gear. I have purchased most of the parts an had a wheel built onto a SS hub. Now, SS hubs are narrower than road hubs - 120mm vs 130mm (although I ...
2
votes
2answers
590 views

Planning on building a fixed-gear/single-speed from an old Schwinn World. What new parts will I need?

I think I want a flip flop hub, to keep my options open. If I get one off amazon, do I need to buy a freewheel and fixed-gear cog as well, or will those come with the hub? Also, does the hub have to ...
5
votes
5answers
652 views

Fixed gear wheel hard to spin

My wheel feels harder to spin than usual. I just put new tires on, and at first I thought a tire must be rubbing, but that's not the case. Seems like the hub might just be gunked up inside, but I'm ...
3
votes
1answer
167 views

Getting the hub logo facing the valve hole?

I have built a number of wheelsets and always struggle to get the hub logotype "upwards" and faces the valve hole in my rim, so that it aligns with the tire logo. Instead of getting it right the ...
4
votes
1answer
152 views

Are all ready-made wheels sold “cassette compatible” only?

I will have to change my wheels on my old trusty late-80s Peugeot (PS28) soon. The rear wheel is mounted with a freewheel-type 6-speed hub (not cassette). I was wondering if all ready-made wheels ...
1
vote
1answer
78 views

Single Speed Freehub

I have a Road bike with a Shimano 8 Speed Freehub. I want to go to a single speed bike, but I'd rather not use a fistfull of spacers. Is anyone aware of a single speed freehub body that I can replace ...
0
votes
1answer
138 views

Can I install an 8 speed sturmey archer hub on a dahon folding bike

Can I install an 8 speed sturmey archer hub on a 6 speed dahon folding bike ?
1
vote
1answer
382 views

Could I have damaged the bearings/cone when replacing a tire? Front wheel wobbles side to side

Last evening I installed new tires on my bicycle. The front wheel now wobbles side to side. I notice a small movement about 1-2 mm near the hub/axle cone. I checked to see if the skewer is all the ...
4
votes
2answers
117 views

What size cone wrench am I likely to need for a Trek 1.5 2011 Compact rear hub?

Unfortunately the manufacturer's website, and google don't appear to hold this information. The only thing I've found is that the hubs are aluminium which doesn't really help. Is there a common size ...
3
votes
1answer
135 views

Do I require a washer/spacer/shim between a hub's cone nut and lock nut?

When replacing the cones for a front hub with new ones, is it okay to tighten the lock nut directly against the cone nut? Or must I use some kind of spacer / washer / shim in order for some other ...
3
votes
1answer
234 views

Can i use a 10 speed hubbed wheel on my 7 speed/cassette bike?

I ride a 2005 Claud Butler San Remo with a Sora 7 cassette on the back. My back wheel has broke and is not repairable and I have bought an Ambrosio WS23 Wheel (700mm) with Bianchi hubs which I believe ...
-1
votes
1answer
169 views

Spoke length with NOVATEC GOLD PISTA hubs and H PLUS SON SL42 rims [duplicate]

I have bought the NOVATEC GOLD PISTA hubs (http://novatecusa.net/project/a166sbt-rh/) and the H PLUS SON SL42 rims (http://hplusson.com/products/SL42) with 32 spokes. Someone know how does long I must ...
26
votes
6answers
5k views

What's the efficiency of hub gears compared to derailleurs?

What's the efficiency of hub gears compared to derailleurs. I know that hub gears are not as efficient, a part from being heavier, how much will I loose in performance if I use hub gear?
1
vote
1answer
87 views

Bicycle rear hub sounding weird

My rear axle broke about 2 weeks ago, and I replaced it with a new one. I also replaced the ball bearings with new ones when I did this. The issue I am having is when I'm going with a higher speed ...
4
votes
1answer
805 views

How do I remove the freewheel side of a flip flop hub?

I've got one of those flip flop hubs, and I need to remove the freewheel side and either service or replace it as it has started slipping really badly. What tools do I need?
3
votes
7answers
2k views

Is there such thing as a freewheel that doesn't click?

The clicking sound of the freewheel on my singlespeed when it's coasting is annoying for me, so I flipped over my back wheel and rode fixed for a few months in blissful silence. But having to pedal ...
5
votes
3answers
1k views

Convert fixed gear to coaster bike

I want to convert my fixed gear 700c bike (raleigh rush hour) to coaster break bike. Can anyone recomend the best way to do this. Can anyone recomend a good coaster rear hub or coaster rear wheel?
0
votes
1answer
722 views

Freehub has started slipping, what can I do?

I've just gone through the london winter and both my bikes now have a slipping freehub. Admittedly my mountain bikes' freehub is quite old and probably worn out, but I'm wondering if they are seized ...
5
votes
3answers
6k views

How do I change my single-speed to a fixed gear?

I've been biking on single-speed for a few months and would like to play around with a fixed gear. I've heard of a flip-flop hub, but I'm not sure exactly what it is. And without any fellow bikers - ...
3
votes
2answers
378 views

More freehub removal problems.

So helpful folks here helped me get the cog and lockring off, and now I'm stuck with this. I looked on Park's website again for "removal of freewheel" help, but mine didn't fit with any of the ...
4
votes
1answer
313 views

Should cassette “wiggle”

Recently My freehub broke and so I removed the cassette to replace the freehub and noticed, whilst off the bike, 4 of the remaining bolted together 8 sprockets wiggled (4 wiggled together but ...
5
votes
1answer
641 views

Any experience about radially-laced hub flanges actually breaking?

Most hub manufacturers forbid lacing spokes radially, mostly because there is less material in the radial direction away from a flange hole than in the standard 3-cross, tangential lacing. (UPDATE: ...
4
votes
1answer
570 views

Mountain bike axle diameters

Out of interest I would like to understand the benefits of having a 15mm or 20mm through axle over a 9mm QR (and a 10mm vs. a 12mm TA on the rear). What difference does it make to the ride?
7
votes
2answers
184 views

Why are hub shells such different diameters?

I'm curious: why are some hub shells much larger diameter than others? Is it an aesthetic consideration? Or are there cost/functionality tradeoffs? Take for example this Dura-Ace hub -- pretty ...
2
votes
1answer
310 views

What is this point of this Phil Wood “Rohloff Disc Rotor Compatible Hub”?

http://www.philwood.com/products/hubspgs/rohldisc.php As far as I can figure it is for people with Rohloff-equipped touring bikes so that they have the same rotor bolt pattern on their front and rear ...