I have Hayes Nine hydraulic disc brakes on my mountain bike. I have recently replaced the brake pads and after that it seems that the pads are almost touching the rotor. How can I adjust it? I have ...
I recently replaced the brake pads on my hydraulic disc brake. The brakes are a Tektro Draco 2. Now the new pads are constantly touching the rotor. This is how it looks like with caliper ...
I have seen a number of posts about stopping discs from squealing, but mine don't always squeal, when the squealing starts it doesn't stop (as if something has worn off) and it's not worn out pads. ...
I'm seeking advice on how to install disc brakes on a bike that does not have rear disc brake mounts. The bike I have is the Trek 7.1 FX. Does the Trek 7.1 FX have the mount for installing disc ...
I have a bike with Avid hydraulic brakes. The levers feel loose and at the end of pushing it, there is a "soft" feeling (like when V-brakes pads aren't adjusted properly). As I understand, it's air ...
What is the difference between hydraulic and mechanical disc brakes? Are hydraulics more reliable? Or more powerful? I'm curious since, hydraulics seem to get more attention and seem to be on ...
In trying to change the brake pads on my mountain bike, I managed to get oil on my new pads and empty out all the brake fluid, and consequently also get some oil on the disc. I took the bike to the ...
I just installed a new front disk brake and the rotor rubs a bit once per rotation. If I take the rotor off and place it on flat surface, it seems totally flat but once installed I can see/hear it ...
Disc brakes are more expensive than v-brakes, but in a heavy rain they will break down. V-Brakes are becoming harder to find, but they're much easier to maintain and don't break down as easily. What ...
I ride MTB in a coastal town where all roads are dirt roads with lots of uphill/downhill. Nothing extreme, I just ride to relax and enjoy the landscape. I have mechanical disc brakes and after a 2-4 ...
I've reset the pistons (after taking the pads out) of my XT hydraulic brakes, and made sure they do extract evenly when operating the lever. After putting the pads and the wheel back in (and adjusting ...