The anti-rotating washers on my Nexus 8-speed internal hub axle are opposite to what every service manual I've seen suggest they should be. In particular, the yellow washer is on the left side and ...
I am planning to buy the SG-3D55 internal gear hub. According to this forum post, the SL-3S35 is compatible. But what about the other 3 speed nexus shifters? I am finding it hard to find any ...
Would you recommend for a good grip from Shimano Nexus shifter? I hardly find a good option. Ergon grips seem to be the best choice.
I have assembled a bike with new Shimano Nexus 3 (SG-3C41) internally geared hub. In the lowest gear the hub is silent. However in the middle and highest gear it makes a clicking noise similar to ...
This is an expensive and heavy hub but I'm looking to build a new wheel and strip the rear derailleur off my old Trek MTB. It already has a fixed Ritchey carbon fork and front disc and is a nice ...
The situation My Shimano Nexus Inter-3 internal gear hub is stuck in second gear (it's a 3-gear hub). When I take the external cable housing apart, I can move the pin that goes inside to change gears, ...