1
vote
4answers
347 views

What should I look for when buying chain lube / lubricant?

In the past, I personally have only used WD-40. However, I have occasionally had my bicycle looked over at the locally run, free service sessions and most of the mechanics there use a hand applied ...
4
votes
2answers
556 views

Reusable gloves for bike repairs?

I'm looking to degrease/lube the chain, adjust disc brakes, clean, etc. at home, but don't want to get my hands dirty. (Zinger alert.) Are there any special re-usable gloves for this kind of bike ...
8
votes
1answer
173 views

Chain Lube Compatibility?

I bought the bike used, so I am not sure what chain lube was used in the past. I used Tri-flow Superior Lubricant once but may wish to experiment with other lubes in the future (Finish Line Teflon, ...
2
votes
2answers
1k views

How should I lubricate my Shimano freewheel?

I have a Shimano freewheel (MX-30) that came with my bike from new. Unfortunately the internals got all gunked up and it stopped working (never engaged and became free both ways). I have bought and ...
1
vote
4answers
2k views

Can I use gear oil on my chain?

I don't have any chain oil right now, but I have some gear oil left over from working on my car. Would it be an effective chain lubricant? It's listed as 80W90, but reading the Wikipedia article ...
4
votes
2answers
6k views

Which lubricant/grease to use for ball bearings?

A little mishap happened today during cleaning my bicycle. I tried to take off the sprocket wheel for easier access, but instead I opened the lock nut of the hub (cassette type) and the balls came ...
3
votes
1answer
806 views

Bike Assembly - What all needs lubrication?

I'm in the middle of a frame swap for my road bike. As I'm putting the bike back together, I've been wondering what all needs lubrication? Is there a comprehensive list somewhere that explains what ...
2
votes
4answers
416 views

Where can I find containers to dispense bulk chain lube

So, I'm looking for drip style containers to keep in my messenger bag and my home shop to dispense bike chain lube. I want to just buy a 32oz container of lube for cheap on amazon and fill my own ...
6
votes
3answers
710 views

What's the point of removing the excess oil after lubing the chain?

There is a very strong point in bike-mechanics culture, which I've seen in very competent answers here, too, to apply one drop of lube in every single roller of a clean chain, and then (!very ...
0
votes
4answers
4k views

Rust on chain and cassette

It looks like rust on my chain and cassette. Both were new 5 months (4000 km) ago. The chain is about 60% worn/stretched. I've been riding 5 days/week, 40 km/day, Toronto on mild winter roads, and ...
6
votes
1answer
245 views

Beyond the chain, what other parts of the bike do I need to lubricate, and how?

Beyond the chain, what other parts of the bike do I need to lubricate, and how? Can anyone provide some guidance of how to get to the hubs, derailleurs, brake parts etc, that need occasionally ...
5
votes
5answers
8k views

What should I use to lubricate a freehub?

I've noticed my freehub has gotten quite a bit louder over the last few months. Several people have recommended that I lubricate the freewheel by tipping the bike on its side and dripping lubricant ...
3
votes
2answers
673 views

Squeaking sounds after lubricating the cogset and chain

My bicycle didn't produce any squeaks until the last weekend, when I decided to make a little maintenance. First, I used "Easy Clean" spray from the White Lightning brand to clean the cogset and the ...
6
votes
3answers
594 views

Should a chain be replaced even if it's not stretched?

This question suggests using a tool or ruler to assess chain stretch to determine when to replace a chain. I have one such tool (Park Tool CC-3), and it tells me that my chain is not stretched even to ...
3
votes
4answers
4k views

How many ball bearings to put in an axis?

I'm cleaning out most of the axes on my new (second hand) bike. I'm replacing the grease inside the pedal axes and I was wondering. How many ball bearings should be inside? I thought there had to be ...
2
votes
3answers
384 views

What should I use to lubricate my kickstand?

The kickstand that came with my bike is rusty and is difficult to adjust. What should I use for lubrication?
5
votes
1answer
318 views

does my degreaser hang around and destroy my new chain lube?

I generally clip on the Park chain cleaner, fill it with a cheap department store degreaser (Rubbermaid), run it through for a few seconds, then fill the chain cleaner with water once or twice or more ...
5
votes
2answers
329 views

Wiping extra Lube really important with all types of Lubes?

This question about chain maintenance during touring raised this quetion. This tip sounds very unintuitive, of course, I know that the extra lube will attract dust (not good to chain) but I have paid ...
15
votes
4answers
6k views

Should I grease a carbon fiber seat post?

I was reading a recent question when I saw this answer: You should absolutely grease your seatpost (unless it is carbon fiber). Why should I NOT grease a carbon fiber seat post?
11
votes
3answers
3k views

Should I oil my seat post?

In a previous question I asked how to remove rust from my seat tube/post. In the comments of one answer somebody said I should be oiling my seat post to prevent it from rusting into my seat tube, but ...
16
votes
2answers
1k views

How do I lubricate my chain?

I know I should lubricate my chain regularly. I got some lube at my LBS; how should I apply it? Do I just drip some on one spot, and turn the pedals around a few times to spread it out? Drip it all ...
5
votes
2answers
565 views

Do you need to lubricate gears after cleaning gears and chain?

I just cleaned my gears and chain with a biodegradable degreaser. I'm going to lubricate my chain. Do I also need to lubricate the gears or do I just pedal and make sure that I hit all gears? Will the ...
6
votes
5answers
2k views

Will using dry lube and wet lube together give you better protection/performance than from using just one of them?

I think the only way to use them together is to put on dry lube first and then wet lube. Will the wet lube hold? Will applying both give you the best that each has to offer? Update Just found this ...
13
votes
6answers
17k views

How often should I grease and repack my hubs and bottom bracket?

I am commuting 7 miles a day (round trip) in all weather in New England (temperate, moderately wet climate, cold winters). Overall I am putting about 1000 miles per year on my commuter bike, a 2009 ...
5
votes
2answers
865 views

Where can I get a basic toolkit for bicycle - Walmart etc?

I want some basic things in toolkit (like oiling of chain, tightening of brakes etc). Where can I find them and how much does it usually cost? I want to buy one, so can you name the basic tools with ...