Chain lube, oil, wax, grease, and other slippery stuff for bike components and frames.

learn more… | top users | synonyms

-1
votes
0answers
15 views

Should I bother buying a chain cleaning kit over just using WD40?

I have often seen chain cleaning kits on ebay like this one. I was wondering: Are there any advantages of the chain cleaner kit over just spraying a general lubricant like WD40, and then brushing ...
1
vote
4answers
119 views

Should cheap suspension forks be oiled often?

Should a cheap fork be oiled / lubricated from time to time? If yes, how?
1
vote
2answers
57 views

Mystery grease source - Alfine 11, Gates Belt drive, Shimano bottom bracket

I have a 2012 Spot Acme and it's been great, everything is still smooth and working well into its second winter. However I picked it up to bring it into the office a week ago and noticed grease all ...
3
votes
4answers
4k views

How many ball bearings to put in an axis?

I'm cleaning out most of the axes on my new (second hand) bike. I'm replacing the grease inside the pedal axes and I was wondering. How many ball bearings should be inside? I thought there had to be ...
2
votes
2answers
995 views

How should I lubricate my Shimano freewheel?

I have a Shimano freewheel (MX-30) that came with my bike from new. Unfortunately the internals got all gunked up and it stopped working (never engaged and became free both ways). I have bought and ...
11
votes
10answers
8k views

Vegetable oil to oil a bike?

Is vegetable oil as good as motor oil to oil a bike?
1
vote
3answers
394 views

How to lubricate noisy joint on Dahon foldable bike?

My Dahon foldable bike makes a huge noise whenever I fold the frame and unfold it. I tried spraying a lubricant into the joint. I do not know if the problem is continuing because the lubricant went ...
1
vote
4answers
257 views

What should I look for when buying chain lube / lubricant?

In the past, I personally have only used WD-40. However, I have occasionally had my bicycle looked over at the locally run, free service sessions and most of the mechanics there use a hand applied ...
2
votes
2answers
184 views

How to clean rubber and plastic parts with sticky, thick teflon-based lube stains?

I once lubed inside a Grip Shifter with Finish Line teflon lube, and used that for a long time. Now I disassembled everything, and the outer rubber part is quite stained and sticky. I tried to brush ...
4
votes
2answers
100 views

Daily Adjusted Seatpost for Trainer Bike

I just got Nashbar's Ascent Fluid trainer and put an old big-box store bike on it that nobody was using, so now I've got kind of a permanent trainer bike which is nice. The problem: me and my partner ...
3
votes
2answers
5k views

Which lubricant/grease to use for ball bearings?

A little mishap happened today during cleaning my bicycle. I tried to take off the sprocket wheel for easier access, but instead I opened the lock nut of the hub (cassette type) and the balls came ...
20
votes
7answers
4k views

How to achieve an always clean chain

My chain and cogs always look very dirty as the oil attracts dirt. It is a constant problem as you can't fully avoid stains on your trousers and hands. Also, that looks ugly and I believe it wears the ...
4
votes
2answers
428 views

Reusable gloves for bike repairs?

I'm looking to degrease/lube the chain, adjust disc brakes, clean, etc. at home, but don't want to get my hands dirty. (Zinger alert.) Are there any special re-usable gloves for this kind of bike ...
8
votes
1answer
167 views

Chain Lube Compatibility?

I bought the bike used, so I am not sure what chain lube was used in the past. I used Tri-flow Superior Lubricant once but may wish to experiment with other lubes in the future (Finish Line Teflon, ...
23
votes
5answers
9k views

How often should I lube my chain?

I ride less than 200 miles a week, and I'm at about the 200 mile mark on my new road bike. Most of my riding is done on the road in an urban city, so there is a lot of odd, unnatural debris. My LBS ...
6
votes
2answers
642 views

Can oil/grease damage tires?

I've noticed a small puddle of light oil beneath the rear wheel of our Rohloff-equipped tandem. I'm told that a small amount of leakage is normal and I'm not worried about that. The issue is that a ...
3
votes
1answer
945 views

Using WD40 for cleaning (not lubricating..)

I plan on cleaning/re-greasing my rear derailleur this weekend, something I've never done before. I watched a video on youtube.. the guy wiped it clean first, then used a spray lube (dry I assume?!) ...
5
votes
5answers
7k views

What should I use to lubricate a freehub?

I've noticed my freehub has gotten quite a bit louder over the last few months. Several people have recommended that I lubricate the freewheel by tipping the bike on its side and dripping lubricant ...
3
votes
2answers
3k views

Advice for servicing a Scott Sub 10 [8 speed Alfine hub gear]

I purchased a Scott Sub 10 last year and use it almost every day for commuting doing around 12 miles a day. I'd say I've done around 2000 miles since purchasing it last Summer. I am going to take ...
2
votes
1answer
162 views

Lubricating screw/braze-on threads: Bike lube or polylube?

Years ago, I made the newbie mistake of forcing a rack screw into a steel braze-on. I had to replace that fork. And I've heard this advice many times: When putting a screw into a braze-on, put a ...
1
vote
4answers
2k views

Can I use gear oil on my chain?

I don't have any chain oil right now, but I have some gear oil left over from working on my car. Would it be an effective chain lubricant? It's listed as 80W90, but reading the Wikipedia article ...
2
votes
2answers
2k views

How to properly clean and lube the bearings on a sram apex bottom bracket (GXP)?

For this bottom bracket type I am not sure you can take the bearings out to lube them. How do I get grease in there. Also how do I get the old grease out? Does it even matter? I found this video ...
5
votes
8answers
7k views

Are there substitutes for chain lubricant?

With long journeys and particularly during winter I have noticed that the salt erodes the chain very quickly, even when I have lubricated the chain beforehand. When you are missing proper chain ...
5
votes
8answers
6k views

Should you use GT85 on your chain?

I've been told by various sources that WD40 is bad for your chain so have avoided using it. I've seen people using GT85 on their chains but I'm not really sure how the two products differ. So my ...
4
votes
3answers
1k views

Is a self cleaning lube enough for chain maintenance?

I've been trying to figure out what I should use when cleaning my bicycle chain. When I first purchased my bike, I knew I needed to lube my chain when i did regular maintenance. I purchased some ...
10
votes
5answers
2k views

What type of chain lube is best for winter riding?

I've read a lot about wet vs dry chain lube and there doesn't seem a definitive answer on whether to use wet or dry chain lube in the winter. Some forums are full of people saying they only use dry ...
3
votes
1answer
614 views

Is there a specific grease for titanium frames?

I have recently rebuilt my road bike on a second-hand Seven Cycles Alaris titanium frame. I used a fairly standard hydrophobic grease throughout but I have been told I should use a titanium-specific ...
6
votes
5answers
1k views

Will using dry lube and wet lube together give you better protection/performance than from using just one of them?

I think the only way to use them together is to put on dry lube first and then wet lube. Will the wet lube hold? Will applying both give you the best that each has to offer? Update Just found this ...
0
votes
1answer
302 views

Clicking gears on new Electra Townie 8i

I asked a similar question related to slipping gears here: Slipping gears on new Electra Townie 8i but now I no longer get slipping, but clicking noise when the pedals are rotated either forward ...
4
votes
2answers
2k views

Using Anti Seize in place of Grease

I bought Nickel Anti-Seize to prevent any corrosion issues between metals, and I generally like using it on my vehicles on bolts and anything I plan on removing later. I'm wondering where it would be ...
3
votes
1answer
667 views

Bike Assembly - What all needs lubrication?

I'm in the middle of a frame swap for my road bike. As I'm putting the bike back together, I've been wondering what all needs lubrication? Is there a comprehensive list somewhere that explains what ...
2
votes
4answers
345 views

Where can I find containers to dispense bulk chain lube

So, I'm looking for drip style containers to keep in my messenger bag and my home shop to dispense bike chain lube. I want to just buy a 32oz container of lube for cheap on amazon and fill my own ...
6
votes
3answers
569 views

What's the point of removing the excess oil after lubing the chain?

There is a very strong point in bike-mechanics culture, which I've seen in very competent answers here, too, to apply one drop of lube in every single roller of a clean chain, and then (!very ...
13
votes
5answers
14k views

How often should I grease and repack my hubs and bottom bracket?

I am commuting 7 miles a day (round trip) in all weather in New England (temperate, moderately wet climate, cold winters). Overall I am putting about 1000 miles per year on my commuter bike, a 2009 ...
0
votes
4answers
3k views

Rust on chain and cassette

It looks like rust on my chain and cassette. Both were new 5 months (4000 km) ago. The chain is about 60% worn/stretched. I've been riding 5 days/week, 40 km/day, Toronto on mild winter roads, and ...
5
votes
1answer
1k views

Flat tire: white liquid inside the tube

I got a flat tire, kind of a big hole in the inner tube. It was raining a lot so I walked home through the rain and water puddles, and everything got wet. Now I want to patch the inner tube, but ...
5
votes
2answers
777 views

Where can I get a basic toolkit for bicycle - Walmart etc?

I want some basic things in toolkit (like oiling of chain, tightening of brakes etc). Where can I find them and how much does it usually cost? I want to buy one, so can you name the basic tools with ...
5
votes
2answers
317 views

Wiping extra Lube really important with all types of Lubes?

This question about chain maintenance during touring raised this quetion. This tip sounds very unintuitive, of course, I know that the extra lube will attract dust (not good to chain) but I have paid ...
10
votes
6answers
3k views

Best chain lubricant for commuter/utility bikes?

What's the best chain lubricant for a bike used for riding in normal(ish) clothes, year-round? I've been using Tri-Flow, but that tends to leave black greasy/dirty stains on pants, shoes, etc. I've ...
6
votes
1answer
241 views

Beyond the chain, what other parts of the bike do I need to lubricate, and how?

Beyond the chain, what other parts of the bike do I need to lubricate, and how? Can anyone provide some guidance of how to get to the hubs, derailleurs, brake parts etc, that need occasionally ...
3
votes
1answer
216 views

What kind of lubrication is used on Electra Townie 8i chain?

I just got a new Electra Townie 8i and notice that the chain appears clean and silvery. Is it supposed to be lubricated and if so, what is recommended lubrication?
2
votes
3answers
325 views

What should I use to lubricate my kickstand?

The kickstand that came with my bike is rusty and is difficult to adjust. What should I use for lubrication?
3
votes
5answers
905 views

Removing lubricant from the rear brake and rim?

I accidentally got lube on my rear brake (v-brake) and my stopping power seems diminished. What is the best way to get it off the brake pads and the rims?
3
votes
2answers
554 views

Squeaking sounds after lubricating the cogset and chain

My bicycle didn't produce any squeaks until the last weekend, when I decided to make a little maintenance. First, I used "Easy Clean" spray from the White Lightning brand to clean the cogset and the ...
6
votes
3answers
537 views

Should a chain be replaced even if it's not stretched?

This question suggests using a tool or ruler to assess chain stretch to determine when to replace a chain. I have one such tool (Park Tool CC-3), and it tells me that my chain is not stretched even to ...
15
votes
4answers
6k views

Should I grease a carbon fiber seat post?

I was reading a recent question when I saw this answer: You should absolutely grease your seatpost (unless it is carbon fiber). Why should I NOT grease a carbon fiber seat post?
5
votes
3answers
1k views

What are the advantages and disadvantages to chain wax?

I recently bought a new chain for my bike and it came full of chain wax. I was wondering if this was a better lubricant then regular chain lube, or if it had some other qualities that the manufactures ...
11
votes
2answers
491 views

How do you evaluate and choose chain lubricants?

Terms such as wet/dry/xyz/winter/summer/autumn lubricants are not well defined. I find it very hard to determine which bottle is worth buying, spray, bottled, wax, parafin, purple, green, Y (other ...
4
votes
1answer
300 views

does my degreaser hang around and destroy my new chain lube?

I generally clip on the Park chain cleaner, fill it with a cheap department store degreaser (Rubbermaid), run it through for a few seconds, then fill the chain cleaner with water once or twice or more ...
5
votes
2answers
3k views

Fork lube. Should I use it? If so how often?

I ride a mountain bike with front suspension. I've recently seen fork lube for sale on an online retailer. This got me thinking. Do I need to be using fork lube? How does it help? If I bought some how ...