1
vote
0answers
60 views

Lowrider style bent forks techniques

Would a 24 inch bent fork fit on a 20 inch frame? Is there even a 24 inch fork? Would a 26 inch fit? Also if it doesn't fit in could I just add to the 20 inch - would you be able to extend it making ...
0
votes
1answer
64 views

Changing one of the chainrings on SR Suntour NEX crank?

I have a SR Suntour NEX (42x34x24) crankset and got my system really bad recently. But as I've used the second (34) chainring most of all I would like to replace only this one. Is it okay? Does my ...
0
votes
1answer
172 views

What exactly happened to my rear derailleur?

I had installed my front derailleur and was adjusting the high/low when I noticed my rear derailleur was hitting the spokes of my wheel. Suddenly, I saw a screw pop out and then my derailleur popped ...
0
votes
0answers
46 views

Planet Bike speedometer won't reset

I have a planet bike speedometer and after the winter season it seems that it is no longer functioning. It will come on when the bike starts to move but I cannot reset it and it seems to be frozen on ...
1
vote
3answers
378 views

Cycle tyre and tube burst

I pumped my cycle front tyre to 105 psi (700*23c) 5 days back and cycled some 60 km on the same day without any punctures. Afterwards I parked the cycle in my bedroom for the last 5 days (due to ...
0
votes
1answer
223 views

Maintenance of Fork springs on Marzocchi Bomber Dirt Jumper

I recently took my fork into my mechanic for service because it was making a rattling noise in one of the fork legs. Upon initial assessment he thought it was a broken return spring for the air ...
1
vote
2answers
208 views

Is it cost efficient to Convert a Huffy Mens mountain bike to a road bike like the one I rented at Orange Peel in CO?

While on vacation in Steamboat Springs CO I fell in love with a road or trail bike I rented and so did my family. We road for miles on a trail and it was great. I want to convert the mountain type ...
0
votes
1answer
312 views

Can't get the drive side bottom bracket cup out

I have an older Raleigh frame that I converted to a fixed gear and the bottom bracket cup on the drive side has been painted over a few times and I can't get it out. This is the type of cup (the one ...
3
votes
3answers
280 views

What are the most common causes for hysteresis in the rear derailler?

I have often seen derailleurs on cheap MTBs to degrade in performance by showing hysteresis. By that I mean that to switch to a certain cog, one needs to shift one cog further and then immediately one ...
1
vote
1answer
195 views

Spoke tension - is a left tilt ok to prevent explosion?

The left hand steel blade spokes of my WH-RS30 (not 30A) are constantly exploding inside of the nipples when going up hill in a standing position. I have increased the right hand side tension to about ...
3
votes
2answers
642 views

How can I remove the bottom bracket from this old road bike?

I need some help removing this bottom bracket. I am obviously no mechanic, and watching several videos on youtube I found nothing that could help in this specific case. Basically after removing both ...
5
votes
3answers
682 views

Cost of maintenance of a roadbike

I am going to buy a bike and ride upto 1000 km or more in a month. Adding them, I think it will come to 12 k to 15 k per year on an average. I will be riding on highways, so there won't be any ...
4
votes
1answer
499 views

What to do about a stuck chain link on 10 speed chain

I put a new chain on my bike and after 3 rides or so, I developed a stiff link. I'm not sure what caused the issue, but now it barely bends at the pin at all, unless forced. It causes skipping ...
4
votes
1answer
393 views

Should cassette “wiggle”

Recently My freehub broke and so I removed the cassette to replace the freehub and noticed, whilst off the bike, 4 of the remaining bolted together 8 sprockets wiggled (4 wiggled together but ...
8
votes
3answers
309 views

There is a lip on my brake pad from bad positioning. Can I remove the lip?

One of my bikes had the brake pads positioned poorly and they developed a pretty pronounced lip where the pad hung off machined braking surface on one side. The bike is using cantilever brakes. These ...
2
votes
3answers
749 views

How exactly are pedals attached to crank arms?

Recently I tried to unscrew the left pedal of a bicycle by turning it counter-clockwise with a spanner lengthened with a piece of pipe. The net result is the spanner broke apart and the pedal is still ...
4
votes
4answers
2k views

LBS said creaking under torque is normal?

on my last question i asked about a creaking/tick i was getting when i was stand pedalling on a climb. I took it to my LBS today and they said they had stripped all the crank and bb and re greased it ...
2
votes
4answers
2k views

Strange noise coming from bottom bracket/crank? any ideas?

ive just bought a trek 6300 and im getting a strange creaking coming from the crank/bottom bracket when im stand pedalling. it only happens when im stand pedalling, and only what appears to be on my ...
2
votes
2answers
948 views

Maintenance/Upgrades for Gary Fisher Joshua MTB

Let me start from the beginning: About three years ago, I broke my leg after buying a Gary Fisher Joshua MTB, when I was just getting into road and cross-country riding. I've only started riding ...
3
votes
3answers
2k views

Is my local bike shop asking to much money to change a rear cog?

I normally have much love for my LBS, but I've moved recently and am a little unsure about this new one due to the fees he is asking. I have a flip flop hub with a fixed gear (18 tooth) cog on one ...
3
votes
2answers
487 views

Possible to repair a pushed in braze-on?

I have a Trek 7200 (Alpha aluminum frame) and it has two water bottle holder mountings, the top braze-on on the seat tube seems to have broken from over-tightening and has sunk into the frame. These ...
3
votes
2answers
742 views

Squeaking sounds after lubricating the cogset and chain

My bicycle didn't produce any squeaks until the last weekend, when I decided to make a little maintenance. First, I used "Easy Clean" spray from the White Lightning brand to clean the cogset and the ...
6
votes
4answers
1k views

How long should spokes last?

Trek Fx 7.3, 1 year old, 1900 miles 3 days short of my 1 year bike purchase anniversary I discovered some broken spokes on the rear wheel. The bike shop gave me a new wheel they had in the shop, an ...
4
votes
2answers
1k views

Is torque relevant for steel/aluminium? Where do I find torque specs?

When you are not dealing with carbon, is torque relevant? I've never seen it mentioned on the hundreds of answers here, or the hundreds of how-tos I've read elsewhere. Should I just tighten ...
3
votes
3answers
7k views

When do bearings need to be replaced?

How do I know when bearings need to be replaced? Should I go by time? Or is there a symptom to guide me?
3
votes
3answers
222 views

Bike Repair Information in Germany

I have been riding a bike for many years now, but I am embarrassed to tell you all that I am an novice when it comes to repairing and maintaining bikes. I have always had a problem with repairing ...
2
votes
6answers
6k views

Adjusting rear derailleur - shifts to lower gear, but not to higher

Well, it will shift to a higher gear, but it takes two clicks of the shifter and it skips over a gear when it does shift. With one click the chain hangs on the current gear by the slimmest if threads. ...
4
votes
2answers
5k views

How do I stop my brake from sticking?

The rear brake (calliper) on my road bike sticks. When I pull the brake it pulls down but only half springs back and there's then slack in the leavers. This is causing rubbing on the rim. It's a ...
10
votes
7answers
15k views

How to remove a crank arm with stripped threads?

A friend called me up yesterday after a mis-adventure during his attempt at a bottom bracket overhaul. He stripped out the threads on the (left) crank arm while using a Park crank puller. In a pinch, ...
7
votes
1answer
472 views

Older Carbon Bike Safety

I have an older Trek 2100 that has carbon fiber tubes with aluminum stays (The frame is used early 90's 2100/2150/2200/2300 road bikes) After a recent accident with a car (going down hill, guy pulls ...
14
votes
2answers
4k views

Sequence for a complete road bike overhaul

I have a road bike that I plan to completely overhaul soon. Over the years, and with several bikes, I have overhauled most every component, but have never managed to do this for an entire bike, start ...