Tools, parts, techniques, and procedures to keep your bike in working order. MAINTENANCE is not the same as REPAIR, a separate tag. Maintenance is what one does on a regular basis. Repair is what one does only when something is broken.

learn more… | top users | synonyms (2)

5
votes
2answers
3k views

Chain drop under load

I have a problem. Today I was riding (flat-out) up hill, and went to shift up a gear on the rear, which caused the chain to drop off the front chain-ring (was in the big-ring, so dropped to the ...
5
votes
2answers
7k views

Does my bottom bracket need replacing?

About two months ago I bought a Boardman HT Comp. Today I took it into my local bike shop for a service. While I was in the shop one of the technicians had a quick look at it and told me that my ...
4
votes
2answers
233 views

Can I 'toe in' these cantilever brake pads?

I'm riding a new bike (new to me) and I am unfamiliar riding with some of the components, specifically the cantilever cross brakes. On my road bike, I toe in the brake pads to help with noise, feel, ...
4
votes
2answers
572 views

Where to park a bike during a year for free ? (in the Netherlands?)

We are two French in love with the Dutch people and culture. Each time we have the time we rush there. Rather than hitchhiking (as we used to), we plan to travel across the Netherlands by bike as it ...
4
votes
2answers
258 views

How to correctly align “be seen” lights

My "be seen" bicycle light is bar mounted and has to be reattached every time I jump on the bicycle, due to theft risk. How do I determine when it is correctly aligned? In particular how are "be ...
4
votes
2answers
2k views

SRAM chain with Shimano cassette and crankset?

When new my bike had all Shimano components. When it was time to replace the chain, the LBS installed an SRAM chain. Was that a mistake on their part (if so, was it a bad mistake)? I had a problem ...
4
votes
1answer
14k views

Shimano Chainring Compatability

In my previous question we determined that I probably need new chainrings. I was/am planning on replacing the chainrings, and leaving the original crank. Now this bike is running Shimano 105 FC-5600 ...
3
votes
3answers
932 views

How to correctly align “to see” bicycle lights?

My "to see" bicycle light shifts out of position. While I need to fix it (fork bridge mounted dynamo), how do I determine when it is correctly aligned? In particular how are "to see" lights ...
3
votes
1answer
2k views

How can I adjust index shifter so it doesn't skip the second chainring?

I recently replaced my chain and cassette on my commuter bike. It was a first time operation for me, as I am a new to doing bike maintenance. That part seems to have gone fine. While I was at it, I ...
3
votes
3answers
2k views

What causes my chain to derail at the rear when I accelerate?

I recently bought a beat-up old mountain bike for commuting. I've tried to clean and adjust the derailleurs and everything seems to work well enough in my garage. But when I put heavy weight on the ...
3
votes
2answers
397 views

What kind of master link is most convenient for IGH / fixie / ss setups?

Here's a question related to this and this -- I've got a IGH bike and want to keep the drivetrain clean. I prefer to remove the chain for regular maintenance, but don't want to have to remove the ...
3
votes
3answers
8k views

Why is my drivetrain so noisy after replacing the chain?

I ride an SE Lager fixed. On the 30th of May this year I did a bit of an overhaul, replacing the rear cog, chain, wheels, tyres and brake pads. I measured the chain last weekend and discovered that ...
3
votes
3answers
18k views

When do bearings need to be replaced?

How do I know when bearings need to be replaced? Should I go by time? Or is there a symptom to guide me?
2
votes
3answers
12k views

Front derailleur won't spring back to lower gears

The front derailleur on my mountainbike sometimes gets stuck in high gears. When this happens and I want to shift down I can nudge it a bit with my foot and it will spring back to the lower gear. I ...
2
votes
2answers
2k views

Identifying bottom bracket

First and foremost.. I'm slowly trying to replace my bottom bracket.. it makes a kind of knackered-bearings sound when I move the pedals round without the chain attached. This is because I've been bad ...
2
votes
3answers
1k views

Spray new bike with teflon to repel dirt and moisture?

I'm getting a new road bike. Would a light spritz of teflon spray help in repelling dirt and moisture? I wouldn't coat it completely, just focus on those dirt collecting areas, the undersides of the ...
1
vote
1answer
60 views

Have some new parts on hand but need new frame - frame swap reasonable? or sell and purchase new bike?

Purchased my first "decent" bike, a Motobecane 700HT about 5-6 years ago as a 'gateway drug' of sorts for myself to get into XC biking. Ended up using it for commuting for a few years as well. Over ...
1
vote
1answer
121 views

Twist shifter cannot shift down – what might be the cause?

My son's bike is stuck on 7. When we try to shift down to 1, there are no clicks. It just shoots right back to 7. This is a dial/twist/grip shifter, not a trigger shifter. I do not think it has ...
1
vote
1answer
253 views

Lock ring won't reattach on bottom bracket

I purchased a road bike and the lock ring wasn't attached, it just hangs loosely on this spindle: It doesn't seem to reattach by screwing it in like one would expect. I tried screwing it in either ...
1
vote
2answers
2k views

10-speed chain too short, can I add links?

I purchased a new KMC DX10SC 10-speed 114 link chain to replace my worn out chain. I'm running a mountain triple and it seems that The chain is slightly too short at it's full length. I can't get in ...
0
votes
2answers
264 views

What size is the tiny ball bearing used in SRAM brake caliper quick release detents?

SRAM road brake calipers (mine are specifically Rival from 2011) have a quick release lever to facilitate wheel changes, as many calipers do. The SRAM QR lever has detents which make a little "click ...
0
votes
2answers
1k views

Back Gears Clicking

I've got a ten gear cassette in the rear and the top gear is fine. But, if I'm in my next four or five gears before the top gear I get a clicking noise of the type you get when you shift and it ...