Tools, parts, techniques, and procedures to keep your bike in working order. MAINTENANCE is not the same as REPAIR, a separate tag. Maintenance is what one does on a regular basis. Repair is what one does only when something is broken.

learn more… | top users | synonyms (2)

1
vote
3answers
2k views

Bottom bracket is ticking

Recently my 2008 Devinci mountain bike sounds like it's ticking when I push down on my left pedal on a usual rotation. When I turn the bike over and go through rotations, I can't get it to tick. ...
1
vote
4answers
3k views

Can I use gear oil on my chain?

I don't have any chain oil right now, but I have some gear oil left over from working on my car. Would it be an effective chain lubricant? It's listed as 80W90, but reading the Wikipedia article ...
2
votes
1answer
10k views

How to adjust Avid Elixir 1 hydraulic disc brakes?

I have a Trek X-Caliber and the rear disc is rubbing a little. So I want to adjust the brakes so it doesn't rub and make things a bit easier of course. I see many videos about brake adjustment but ...
5
votes
2answers
2k views

How long should I expect handlebar tape to last?

I assume that if handlebar tape is grimy, torn, or peeling, it should be replaced. How long should I expect handlebar tape to last before it needs to be replaced? How often do most cyclists replace ...
2
votes
2answers
129 views

Is there any reason to keep original drive-train components together until they can all be replaced?

I broke the master link in my chain a while ago and my LSB told me it was because I wasn't cleaning/lubricating my chain often enough. The chain had experienced more wear than it should have as a ...
0
votes
2answers
10k views

I need help replacing my bike's tube

I recently popped the tube in my front tire and need help replacing it. I don't really know very much about bikes or the assortment of numbers on tubes, tires, and wheels. Here is what I do know: The ...
9
votes
3answers
7k views

Annoying clicking sound from the bottom bracket

I just purchased a Fuji ACR 2.0 road bike from a guy who bought it three months back but didn't ride it at all. I brought it home and found that it is making a clicking sound when I pedal. The sound ...
1
vote
1answer
574 views

Boardman road bike bottom bracket

I recently purchased a boardman road bike and after 5 weeks as soon as you put effort into peddaling I am getting a squeaking noise from the bottom bracket, I took it back to halfords and they said it ...
14
votes
5answers
3k views

Post Rain Ride Wipedown

I've tried avoiding riding during the rain for years because I didn't want to hurt my bike. But, tomorrow I really want to ride, rain (most likely) or shine. What should I do after the ride to ...
3
votes
2answers
298 views

Stop my front brake lever screws from vibrating out?

One of the most common maintenance tasks on my Mongoose Tyax Super is to tighten a small screw in my front brake level. It shakes loose both due to use, and from a habit I picked up riding in ...
2
votes
1answer
385 views

Biopace chain rings and front deraileur rub

Turns out my front chain rings are biopace, after I thought they had disappeared! I've got a problem with the chain rubbing the front deraileur at a certain point every rotation. I only get this in ...
0
votes
0answers
64 views

What regular maintenance should be done to keep the bike in good condition? [duplicate]

Possible Duplicate: How much maintenance? Everytime I get my biked serviced, it ends up costing me over one hundred pounds (including parts), which is not much less than what I originally ...
11
votes
9answers
17k views

Homemade bicycle degreaser liquids

Does anyone have a recipe for a homemade bicycle degreaser solution? I'd like to make my own degreaser solution instead of buying one. I have read about using lemon juice and various types of alcohols ...
2
votes
1answer
2k views

Is it possible to run standard mechanical shifting on a Scott Foil Premium frame?

The Scott Foil Premium is the highest end frame available from Scott Sports, and it is designed to run an electronic drive train, routed internally. The original reports were that this frame would be ...
3
votes
1answer
2k views

How do I clean the inside of a freehub?

I didn't know any better and I let degreaser drip into the freewheel body of my Shimano FH-RM65. Now it makes a terrible retching noise when it rotates. How do I clean the inside of this thing? ...
7
votes
3answers
5k views

When should a wheel be replaced?

I an not talking about upgrading. How do you know when to buy new wheels because the other ones have worn out? How do you tell a wheel is worn out? I can always true a wheel back to true. And nothing ...
3
votes
2answers
469 views

How do you protect the underside of your brooks leather saddle?

I'm new to leather saddles and I'm working on breaking mine in. I'm using a Brooks B17 Narrow. I use clip on fenders with my bike when the weather is bad. However, sometimes I get caught in the rain, ...
0
votes
1answer
279 views

How to Get Starter Pins

I'm not sure if 'starter pin' is the correct terminology. When you buy a new chain, that doesn't have a master link, you get a longer pin that allows you to put the chain together. Then you simply ...
4
votes
2answers
7k views

Which lubricant/grease to use for ball bearings?

A little mishap happened today during cleaning my bicycle. I tried to take off the sprocket wheel for easier access, but instead I opened the lock nut of the hub (cassette type) and the balls came ...
1
vote
3answers
945 views

Exact dimensions for Wheelsmith Rim Rods?

Does anyone have access to the Wheelsmith Rim Rod ERD measurement tool? I need to reproduce this no longer manufactured tool. Specifically, I need the length of the yellow portion of each rod, the ...
3
votes
1answer
917 views

Bike Assembly - What all needs lubrication?

I'm in the middle of a frame swap for my road bike. As I'm putting the bike back together, I've been wondering what all needs lubrication? Is there a comprehensive list somewhere that explains what ...
4
votes
4answers
2k views

LBS said creaking under torque is normal?

on my last question i asked about a creaking/tick i was getting when i was stand pedalling on a climb. I took it to my LBS today and they said they had stripped all the crank and bb and re greased it ...
3
votes
1answer
496 views

Joe Blow Pump Maintenance

My Top Peak Joe Blow floor pump has been getting harder and harder to pump. I bought the high end model so that my 94 lb wife could pump up her own tires, but it has gotten to the point where I can ...
3
votes
2answers
1k views

Alternative Chain/DriveTrain DeGreasers

My question is whether there is anything "special" about the Bicycle-Specific Branded Chain degreasers or whether the much cheaper alternatives are just as good. I've used the ParkTool CB-2 ...
2
votes
4answers
2k views

Strange noise coming from bottom bracket/crank? any ideas?

ive just bought a trek 6300 and im getting a strange creaking coming from the crank/bottom bracket when im stand pedalling. it only happens when im stand pedalling, and only what appears to be on my ...
3
votes
4answers
2k views

Keeping a leather saddle in good condition

Is shoe polish a good or at least adequate solution for keeping a leather saddle in good condition? And/or better options?
1
vote
3answers
323 views

Bike Balancing, How is it done?

When riding hands free, I am noticing my bike is more oriented towards a particular direction (In my case: left). I tried to check of what my problems might be: I check the handles, if they were of ...
2
votes
2answers
982 views

Maintenance/Upgrades for Gary Fisher Joshua MTB

Let me start from the beginning: About three years ago, I broke my leg after buying a Gary Fisher Joshua MTB, when I was just getting into road and cross-country riding. I've only started riding ...
2
votes
1answer
1k views

How do I fold a bicycle tire?

I have Race King (continental) 2.2 MTB 28" tires that I need to store until it's winter and snows again. They are foldable, and I planned to store them in their original boxes, but how do I properly ...
2
votes
4answers
478 views

Where can I find containers to dispense bulk chain lube

So, I'm looking for drip style containers to keep in my messenger bag and my home shop to dispense bike chain lube. I want to just buy a 32oz container of lube for cheap on amazon and fill my own ...
2
votes
2answers
403 views

Puncture resistant tires

The the default tires from my scott aspect 30 (Schwalbe Black Jack, 26 x 2.1, 50TPI) are peaty worn by know and i need to buy new ones. My main complain is the punctures made by vegetation every day ...
5
votes
2answers
2k views

How to make a lockable front suspension last longer?

Lockable suspension is very handy on every ride. But I have witnessed a few cases where they break way too soon, in comparison with other types of suspension. The locks fail to be effective, or the ...
2
votes
1answer
927 views

Better 7-speed chain for Trek Allant?

Bought a Trek Allant for cycling to work (ca 10 miles). Now, after exact 512 miles the chain is worn out and starts damaging the cassette and chainset. Cheap crap material! Is there anything out there ...
1
vote
2answers
745 views

The quick release on my shimano sora brakes pops open during braking

Occasionally, when using my bike with shimano sora brakes on the front and rear, the quick release will pop open during braking, reducing my braking power. Is there some way to prevent this? Is it ...
1
vote
2answers
401 views

how to replace a bearing on BB7800?

Friends, Do anyone of you know on how to replace a bearing on BB7800 ? Do I need a special tool ? or a screw driver, and hammer would be enough to push it out ? Thanks
1
vote
4answers
2k views

Alternative Chain Grease/Lube

Can I use this general-purpose lithium grease on my chain until I can get some Finish Line lube? Thanks in advance.
6
votes
3answers
828 views

What's the point of removing the excess oil after lubing the chain?

There is a very strong point in bike-mechanics culture, which I've seen in very competent answers here, too, to apply one drop of lube in every single roller of a clean chain, and then (!very ...
1
vote
2answers
2k views

Will a hollowtech shimano BB fit a bike which currently has an octalink bracket?

I have a mongoose otero elite 2008 and the crankset is broke (wobbling) It's also bent, so time for a new one. I currently have a nice shimano deore crankset from an old bike, but it uses a different ...
3
votes
3answers
8k views

What tool is needed to remove a Shimano HG-50 freewheel?

What tool is needed to remove a Shimano HG-50 freewheel from the wheel hub? It looks like a 12mm or 13mm Allen key. Will this do it or is there some detail I have missed?
8
votes
2answers
1k views

Should a link opened/closed by a chain-breaker be stiff afterwards?

I disassembled my bike's drivetrain to degrease and regrease all the components. I used a chain-breaker for the first time (previous bikes had a master link) to open a chain link and remove the chain. ...
0
votes
4answers
4k views

Rust on chain and cassette

It looks like rust on my chain and cassette. Both were new 5 months (4000 km) ago. The chain is about 60% worn/stretched. I've been riding 5 days/week, 40 km/day, Toronto on mild winter roads, and ...
6
votes
3answers
1k views

What tools do I need to disassemble and re-assemble an 80's road bicycle

I would like to do maintenance on my 1982 miyata 310 road bike myself. What tools are necessary to take the entire bicycle apart, lube, and put it back together? Here is what I have come up so ...
2
votes
6answers
2k views

Best bang for the buck to improve a cheap fixie?

What are things to improve on a cheap bicycle that make a real difference? I'm looking at the bang for buck tradeoff. The bike is an inexpensive Fixie/Track Bike (less than 150GBP). 11 kg steel ...
8
votes
3answers
2k views

Should I tune up or replace bike?

This question is about the economics of owning and maintaining a bike. I bought a brand new mountain bike for $250 some months ago. I ride about 30 miles a week on paved trails for occasional ...
1
vote
5answers
2k views

Can a fixed gear sprocket be changed without tools?

I do not have a chain whip or sprocket ring tool. Is it possible to change the rear sprocket without these tools?
5
votes
2answers
20k views

How do I measure a bottom bracket?

I need to replace the bottom bracket bearing on my fixie. I plan to get a Shimano UN26, but I note that there are a number of different sizes. The sizes seem to be expressed as 68-110, where 68 is the ...
4
votes
3answers
9k views

Why does my gear slip when going uphill / standing?

I have a road bike that I use to commute ~6 miles to work every day. Some of the portions of the ride are at a steep incline, and I've noticed that when I get up to stand on some of these hills, my ...
1
vote
3answers
1k views

Ultegra 9-speed brifter upshift problem - beyond WD-40?

I have a 2000 Ultegra 9-speed right/rear brifter that does not "release" the cable properly. My initial search on this problem suggested that this could often be cured by flushing with WD-40. So ...
2
votes
1answer
584 views

Should I put grease under the lockring on my cassette?

I take my cassette off the bike to give it a good cleaning a few times a year and have always put a good amount of grease under the lockring. I am not talking about repacking the hubs, bearings or ...
0
votes
2answers
681 views

Accessory to raise handlebars (on a bmx)

I just bought a used bmx bike and after raising the seat to a level where it is semi-comfortable to pedal while on the seat, I now find that the handlebars are too low. Is there any sort of an after ...