2
votes
2answers
357 views

Buying brake levers, how do I find the correct ones for my bike?

I took a hard spill the other day on my mountain bike and snapped my left hand brake lever in to pieces. The ones that snapped are stock alloy rubbish that came with a Specialized Hardrock 2010 Disc ...
2
votes
3answers
2k views

Disc brakes make noise

My disc-brakes on my mountain bike sing/scream when I brake. I have tried to clean them, but it didn't work. Should I replace the disks or the brake pads? Is there a better (cheaper) way to fix this.
9
votes
3answers
2k views

What is the benefit of a larger disc rotor?

What real benefit does having a larger rotor give to braking performance? Additionally is my assumption correct that you callipers don't actually change in size, just the rotor and the adapter need ...
3
votes
2answers
2k views

How do I align my front brake disk with the caliper?

I have manual Avid disc brakes. I took my front wheel off like I've done hundreds of times. When I put it back on the wheel is aligned properly with my fork, but the disc presses against one of the ...
3
votes
1answer
315 views

Is my disc brake caliper correctly mounted on the frame?

I have been in the process of upgrading my bike a bit. A friend of mine convinced me to upgrade my brakes from my stock Shimanos to some disc brakes. After having a look around and asking question, I ...
2
votes
2answers
1k views

How to deal with long pre-bled brake line?

I bought and installed a set of pre-bled hydraulic brakes onto my bike to replace the mechanical discs that came with it. My future plan is to buy a new bike, transfer the brakes to my wife's bike and ...
2
votes
2answers
1k views

Can I run a wheel with a 130mm hub on a mountain bike with 135mm spacing?

I'd like to build a wheelset that would work on my cross bike or my 29er, assuming I had disc brakes on the 29er and rim brakes on the cross bike, is there any way I could use a 130mm hub (that fits ...
7
votes
4answers
1k views

Would hydraulic disc brakes be easier on my hands than mechanical disc brakes?

I ride MTB in a coastal town where all roads are dirt roads with lots of uphill/downhill. Nothing extreme, I just ride to relax and enjoy the landscape. I have mechanical disc brakes and after a 2-4 ...
2
votes
1answer
675 views

How can I unbend, straighten or flatten a bent rotor?

Some possibilities, which I haven't tried: try to bend it back into shape with my hands while still mounted take off the rotor, sandwich it between a couple of wooden blocks, put some weight on it ...
7
votes
3answers
13k views

How long should MTB disc brake pads last?

I'm fairly new to mountain biking and I was able to put in around 900 miles on my first set of brake pads on my Giant Anthem X2. At that point they started grinding metal on metal. I went and bought ...
4
votes
2answers
2k views

Adjusting disk brake pad positions

I have had experience on a couple of mountain bikes when I could not adjust the disk brake caliper positions far enough left or right to keep the pads from rubbing the rotor a little. Is this common ...
0
votes
2answers
1k views

Are the rear brake mounts on my Boardman Team HT post-mount or IS?

Boardman Team HT Last weekend I broke the rear brake lever in a crash. I'm looking for a replacement brake disc kit for the rear brake, but I don't know what kind of mounting I've got. There seem to ...
8
votes
4answers
9k views

Disc brakes squeak on Trek mountain bike

I have a Trek 3900 mountain bike with disc brakes, and I just took it out of winter storage to start riding it for the season. Everything works well, except for one very annoying problem: when I stop ...
10
votes
4answers
2k views

What causes my front wheel to twist when I apply the brake?

I have a 2005 Specialized HardRock Sport with disc brakes. When I'm slowing down from a reasonable speed with the front brake, I noticed that the top of the front wheel appears to deflect sideways ...
19
votes
5answers
33k views

How do I separate disc brake pads after accidentally pulling the front brake while the wheel is off?

The title says it all really. I've taken the front wheel off my mountain bike to get it in my car. When I get it out and try and put the front wheel back on the space between the brake pads isn't wide ...
6
votes
1answer
9k views

How do I bleed Avid Elixir brakes

My bike has a set of Avid Elixir R hydraulic brakes. The front brake barely goes on when I pull the lever and the back brake feels pretty soft. I think I need to bleed them. How do I go about doing ...
9
votes
2answers
6k views

Hydraulic Disc Brakes Maintenance

I have Hayes Nine hydraulic disc brakes on my mountain bike. I have recently replaced the brake pads and after that it seems that the pads are almost touching the rotor. How can I adjust it? I have ...
16
votes
5answers
3k views

What type of brakes are best for mountain bike racing?

Disc brakes are more expensive than v-brakes, but in a heavy rain they will break down. V-Brakes are becoming harder to find, but they're much easier to maintain and don't break down as easily. What ...