Mountain bike (MTB) can mean almost any kind of off-road bicycle. Wide knobby tires, flat handlebars, maybe shocks, probably a sturdy frame...

learn more… | top users | synonyms (1)

6
votes
4answers
3k views

How to shoulder a bike?

In a previous question it was explained to me that no cables pass under the top tube of my Specialized Hardrock, so that the bike is easy to shoulder. Well, it isn't. The top tube is quite thin ...
6
votes
4answers
783 views

How to practice SPD release in very steep uphills?

Some time ago I got SPD pedals for my MTB. When going downhill or rather flat these pedals are awesome. However, I have problems using them on sharp uphill with roots/rocks. Because it's steep, I ...
6
votes
4answers
1k views

Switching from a mountain bike to a road bike

I will be moving soon because of my work and the new area is not very "mountain bike friendly" as it is very flat and there aren't much hills or mountains around. So I think of buying a road bike to ...
6
votes
5answers
1k views

Is 650b a better platform than 26“ or 29”?

I have seen more and more reference to the 650b (27.5") mtb wheel size. Whilst I don't see any need for a new standard, does anyone know of any benefit to have a 27.5" wheel over a 26" or 29"? While ...
6
votes
3answers
373 views

How is this kind of cycling correctly called?

Sometimes I like to make rather high-speed descents (during which I also make jumps) in the forest near to my house. I want to know how this kind of activity is correctly called. Is it downhill, ...
6
votes
3answers
368 views

What should my first adult bike have?

I bike a lot and I'm looking to spend £400-800 on a full size bike. It must have full suspension, detachable front wheel, preferably room for a minipump and a large water bottle (without using the far ...
6
votes
7answers
41k views

How can I tell what brand/make of bike I have?

I'm trying to find what kind of brand/make my bike is so I can find more information about it. It might help me determine if I should buy a new bike. All I can tell from looking around my bike are ...
6
votes
4answers
1k views

New, cheap mountain bike: What's most likely to break?

I have a very cheap (less than USD $100), new mountain bike I'm about to break in on a 2-4 hour ride on a mountain trail. I'd like to be prepared for equipment failures or problems - can anyone ...
6
votes
2answers
238 views

How does a mountain racing team work together?

For a road race, I can imagine riding in a pelton has an advantage against air drag. However, for MTB this does not make sense. XC races are slower than road races, and in a DH race having someone ...
6
votes
2answers
3k views

How do I determine current value of a used bicycle? [closed]

I'm looking at purchasing a 2012 Trek Cobia from a private seller. The bike was about $1,200 new. The bike appears to be in almost new condition and contains all original equipment. The seller wants ...
6
votes
3answers
18k views

How can you identify if a Shimano rear derailleur is medium or long cage?

I have a 2013 Shimano XT rear derailleur. It is part of a 2x10 drivetrain. How can I find out if it is a medium or a long cage one? The picture below shows the derailleur.
6
votes
1answer
2k views

How to jump curbs?

Putting aside the question should one ever ride on the sidewalk, I would like to jump curbs safely and seamlessly. Assume a hardtail mountain bike with high saddle (we are in the city), at a speed of ...
6
votes
4answers
290 views

Alternative uses for an aluminum MTB frame

Any alternative use for old mountain bike tyres and inner tube? So my frame has a large crack near the headtube and I am replacing it. Could I use the frame in any other way? E.g. give it away ...
6
votes
1answer
326 views

S shaped down tube (MTB)

Are there any advantages of S shaped down tubes over the traditional ones on MTB? For example: what do you think of this design? Jamis Exile Comp 2013
6
votes
1answer
469 views

I have accidentally removed a front suspension fork - what now?

I have accidentally removed the suspension fork from my bicycle (Trek Remedy 8). I was trying to take off just the handlebar, but was distracted for a moment and unscrewed the wrong bolt. How safe ...
6
votes
2answers
1k views

How much time takes for hydraulic disk brakes to cool down?

Yesterday I was on a DH track for the first time. I have Avid Elixir 7 brakes with 203" rotor in front and 180" rear. The descent took about 5 minutes, and the ropeway up about 15 minutes. After 6 ...
6
votes
6answers
16k views

Can you run a standard tyre on a tubeless rim?

I have some new tubeless MTB rims and I'd like to avoid buying new tyres for them. The tyres are reasonably sturdy (Continental Race King Protection - 4 plies / total 240tpi) and I have sealant. As I ...
6
votes
1answer
642 views

Got two bikes, one of them is more exhausting to ride, what can it be?

I have owned a bike for many years, it's a cheap one but it's perfectly fine. Recently, I've bought a bike for my girlfriend, second hand from someone quite clueless about bike maintenance. Mine is ...
6
votes
2answers
330 views

What to look for in quality mountain bike pedals?

After a few rides in mucky trails, I am finding my Norco Bush Pilot pedals are getting rough and do not spin very well. Additionally, the plastic of the pedals are getting pretty beat up. I realize ...
6
votes
3answers
2k views

Mountain bike — exciting after-market parts, modifications or paint jobs

I have a Specialized Stumpjumper Comp FSR from 2009. My previous bike was a mean-looking matte black Cannondale Jekyll 1000 with a Lefty fork. Now I've got this vanilla, grey boring looking bike that ...
6
votes
2answers
544 views

Can anyone recommend a good maintenance-free rear shock?

The old shock just gave up its life in my old single-pivot all-mountain frame. I'd like to replace it with something tough and maintenance-free, so that I don't have to worry about air pressure, oil ...
6
votes
3answers
2k views

Which country has the cheapest top-end mountain bikes? [closed]

I'm living in Brazil where top-end mountain bikes are very expensive, due to high import tariffs. I'd like to know which country has the cheapest top-end mountain bikes? top-end would mean a bike ...
6
votes
1answer
10k views

How do I bleed Avid Elixir brakes

My bike has a set of Avid Elixir R hydraulic brakes. The front brake barely goes on when I pull the lever and the back brake feels pretty soft. I think I need to bleed them. How do I go about doing ...
6
votes
2answers
417 views

At what point does one need to replace a chain ring on a mountain bike?

The large chainring on my mountain bike is missing a number of teeth on one side (apparently the side I like to go over rocks on). Is it harmful to the drivetrain to ride without these if I'm not ...
6
votes
2answers
738 views

Suspension setting for slippy and steep uphill

Normally one locks or sets both suspensions to a really hard setting to not loose to much force while going uphill. I'm however having problems on steep passages, as my front wheel lifts off the ...
6
votes
1answer
4k views

Picking spare inner tube size

My daily rider is a Schwinn MTB with 26" wheels/tires. Specifically the tire size is 26x47/52. On the inner tube there's a label that reads 26 x 1.90-2.125. I'd like to purchase a few spare tubes in ...
6
votes
1answer
582 views

Is there a significant difference between the new all-mountain/trail and classic cross country helmets?

There is a new niche of "all mountain" helmets, like Fox Flux, POC Trabec, 661 Recon etc. They feature closed, rounded backward design, and claim to protect the brainstem better. I ride all-mountain ...
5
votes
15answers
57k views

How to find a mountain bike that can handle a heavier (250-260lbs) rider?

I am a 44 year old man that is very heavy (250–260lbs(113-118kg)) and I am looking to buy my first mountain bike to do some riding on the weekend to burn off some of this fat I have.
5
votes
3answers
447 views

Advantages of mounting bottle under frame

I'm wondering if there are any advantages to mounting ones water-bottle on the bottom of the down tube, near the ground, versus on top of the tube. I'm mainly interested in the advantages, or lack ...
5
votes
5answers
2k views

Are single-speed bikes better equipped to handle cog/chain wear?

I need to decide between a single-speed and multiple-speed bike. I usually ride multiple-speed mountain/city bikes in the highest gear anyway (around town). They're not intended for that, and doing ...
5
votes
4answers
545 views

Are there any things to avoid when being given a free bike?

Someone has just given me a free mountain bike (No obvious branding on it, but its got a 21-speed Shimano gear system and a shock absorber between the front and back of the bike in the middle of the ...
5
votes
5answers
850 views

Difficulties with cleat pedals

I have bought Shimano SPD pedals and MTB shoes recently. After riding for a while with cleats I decided to go back to regular pedals as I had trouble getting used to the SPDs: With cleats power is ...
5
votes
2answers
1k views

what does a 22 gear bike look like?

I read that road bikes on average have around 22 gears and mountain bikes up to 30-40. But my hybrid only has gears numbered 1-3 on the left hand and gears numbered 1-8 on the right, so my bike's a 8 ...
5
votes
2answers
28k views

Building my own full suspension MTB: How to I select a frame?

I've recently gotten back into mountain biking. I took my 5 year old Iron Horse full suspension out to the mountain with some friends that had recently purchased new bikes. I haven't ridden for a ...
5
votes
3answers
5k views

Can I enter an enduro race on a hardtail mountain bike?

I really like the idea of enduro racing but I cant currently afford an enduro specific bike. Is it acceptable to enter an enduro event on an aggressive XC/trail hardtail mountain bike? Are there any ...
5
votes
5answers
41k views

What are the pros and cons between an aluminium and carbon frame?

I'm after a mountain bike and I've narrowed it down to the Cannondale F29 (based on reviews, plus I like the look of the bike). My question is, should I go for the carbon bike or the alloy bike? I'm ...
5
votes
2answers
494 views

MTB tires: why the extended thread on the edges?

I have tires similar to this one: My point is that the tire is quite "flat", with large knobs on the edges, unlike most MTB tires, which are round. The tires feel quite unstable on any hard surface ...
5
votes
5answers
15k views

Can I combine different wheel sizes in one mtb?

Imagine a mountain bike that uses a 29er fork with 29er wheel and a 27.5 wheel at the rear. Can this be realized and what are the pros and cons?
5
votes
2answers
2k views

What to do about a stuck chain link on 10 speed chain

I put a new chain on my bike and after 3 rides or so, I developed a stiff link. I'm not sure what caused the issue, but now it barely bends at the pin at all, unless forced. It causes skipping ...
5
votes
3answers
42k views

Can I put a road bike tyre on a mountain bike? [duplicate]

I am finding it difficult to ride a Mountain bike, I feel that it may be more comfortable to change the tyre to that of a road bike, which are thinner in size. Please advise if I can do so.
5
votes
3answers
2k views

Why are people with full suspension bikes concerned about 'Stiffness' added by thru axles?

Why are people with full suspension bikes with several inches of travel be concerned about 'Stiffness' when discussing the advantages of thru axles. I would think this is more of a concern for rigid ...
5
votes
2answers
404 views

Is the Power-Link designed for routine usage?

I have a Power-Link which i intended to use in emergencies (when the chain breaks and i'm far from home). Used it once, worked pretty well. Now i wonder, what if i use it permanently with my chain? ...
5
votes
5answers
1k views

Is there anything special to pay attention to when preparing a bicycle for powdercoating?

I am thinking of having an old bike powdercoated to spruce it up a bit. What do I need to do to prepare the frame? Remove all components? What about stickers and decals? Some kind of chemical etching ...
5
votes
2answers
3k views

What are typical max speeds for pro downhill races?

Looking videos like Red Bull Rampage or Mega Avalanche make me wonder about the speeds attained by those pro bikers. How fast they go in straight line sections?
5
votes
3answers
1k views

How is cornering on the road different than cornering on dirt?

The general advice about cornering is to lean the bike, not the body, to put pressure on the outside foot, and not to brake or brake only with the rear brake if absolutely needed. --me There ...
5
votes
2answers
719 views

converting from MTB to hybrid, what should I consider

I regularly ride MTB off road and used to use the bike for commuting too. I recently bought a hybrid for my commuting in addition to my MTB. What should I consider in terms of maintenance and riding ...
5
votes
2answers
2k views

Can I run a dual crankset with a chain guide tensioner?

We recently got a new mountain bike for my son via craigslist, it is a couple year old Transition Bottle Rocket and came with a E-Thirteen SS+ chain guide/tensioner. He would like a lower gear for ...
5
votes
2answers
233 views

What is a good method for constructing dirt jumps?

What is a good method for constructing dirt jumps? Not massive jumps, just something more than a simple mound of dirt for a bit of fun. It's one thing to pile up the dirt, but there seems to be a bit ...
5
votes
4answers
320 views

Any tips on riding a roll-off, followed by a trench?

Any tips on riding this section of the trail? The land is sandy and the clearance afterwords is several meters. I can't ride it slowly, as it is too steep and the sand will slide off. I suspect the ...
5
votes
4answers
2k views

How to cut carbon handlebars

Last year, I installed carbon bars on one of my mountain bikes and I'm finding them too wide. I've been told that taping over the points you're going to cut at will prevent fraying/roughness, but what ...