Mountain bike (MTB) can mean almost any kind of off-road bicycle. Wide knobby tires, flat handlebars, maybe shocks, probably a sturdy frame...

learn more… | top users | synonyms (1)

4
votes
1answer
424 views

What MTB 10 speed double cranksets exist with 180mm cranks?

I am looking for a a 10 speed dual crankset that has 180mm cranks. I see the SRAM cranksets only come in 170 and 175mm.
4
votes
1answer
188 views

How often to sevice suspension forks

Consider a SunTour XCR coil fork or any similar. Service manuals suggest "full service" every 30 hours of riding time. I take that to mean removing the boots and re-lubing the stanchions. However, ...
3
votes
7answers
3k views

How much of a difference will I notice going from a Mountain bike to a road bike?

I have a Mountain bike with 1.95 tyres on it. Most of the cycle path I take into work is fairly well paved/asphalted, I'm not going over any dirt tracks or anything like that although there is the odd ...
3
votes
6answers
1k views

How can I develop my abs while I ride my bicycle?

I have a mountain bike, and I wonder if I can develop my abs if I take my bike to work everyday.
3
votes
4answers
375 views

How to determine if a decline is too steep for safety?

I often find myself confronted by a steep and bumpy bit of hill on the trail, or one or two steps on the path, and end up with three possible results: A) ride down with no trouble (usually) B) step ...
3
votes
5answers
721 views

Are single-speed bikes better equipped to handle cog/chain wear?

I need to decide between a single-speed and multiple-speed bike. I usually ride multiple-speed mountain/city bikes in the highest gear anyway (around town). They're not intended for that, and doing ...
3
votes
4answers
3k views

My crank fell off, how do I re-attach it?

I was out riding on my mountain bike when my crank unexpectedly fell off (video). How do I reattach the crank? There's a torque range specified (25-30 Ft-Lbs): how critical is this? I don't own a ...
3
votes
3answers
536 views

Which parameters should I track with bicycle computer so I can analyze changes in my riding?

I'm building Arduino-based bicycle computer with GPS at my free time as a hobby project. So I have to find out which parameters of ride will be useful to track to see a progress (or any changes) in ...
3
votes
3answers
245 views

Is it normal for disc brakes to smell of burnt plastic?

So, a new bike, Avid Elixir 5 180mm front and rear. My second ride was on a short dirt road, 340m denivelation. I held the brakes (mainly the front) more than 50% of the time, as the road was too ...
3
votes
3answers
822 views

Does rear-shock placement affect suspension characteristics?

I know that suspension type(Horst-link, Four-bar etc.) affects how a full-suspension mountain bike handles, but you can often see these same types of suspension systems used with different shock ...
3
votes
2answers
1k views

Biking with spinal disc herniation

I was diagnosed with lumbar spinal disc herniation and told that I should exercise. I always liked biking, so I want to do that. I have an older rigid mountain-bike and will be mostly driving on ...
3
votes
4answers
923 views

Tri-bars/Aerobars on Mountain Bikes

I am trying to work on endurance in the hopes of one day touring the GDMBR in a reasonable amount of time and after watching Ride the Divide, I noticed a lot of the riders are using aerobars. When I ...
3
votes
2answers
599 views

Are there LED based dynamo powered lights suitable for night time MTB riding on singletrack?

Are there LED based dynamo powered lights suitable for night time MTB riding on singletrack? Likely they would need to have: High Brightness, likely 500 lumens or better. Not sure how that translates ...
3
votes
2answers
850 views

What is a better gearing combination for downhill?

One of the tracks I've been riding recently is testing both my skill level and my bike. The track is a combination steepness and roughness that makes it significantly different to what I've previously ...
3
votes
5answers
15k views

Clicking sound coming from pedals/pedal spindle/crank

I recently bought a Trek 4300 series MTB, but after only several weeks of use, I'm getting a clicking sound coming from both sides of the pedals. It seems particularly pronounced when more torque is ...
3
votes
4answers
258 views

Good books on mountain biking

What books do you know about learning mountain biking.
3
votes
3answers
126 views

Would learning to ride a unicycle boost biking skills?

Unicycles are not particularly expensive, seem to be light and portable, also fun. This gets me wondering if spending a couple of months to learn riding such a thing would boost a mountain biker's ...
3
votes
1answer
758 views

Is it possible to replace a 1 1/8 steering tube with a 1"?

I have a 94 Giant ATX. Threaded 1 inch steeering tube. I need a shorter stem, and would also like to install a suspension fork. Is it doable? Could I take a modern suspension fork, heat the crown, ...
3
votes
4answers
719 views

How does stiffness affect experience and performance?

I see many mountain bike reviews and articles discuss the stiffness of frames, forks, wheels and other components. Here are some questions which cross my mind: What is the definition of stiffness? ...
3
votes
3answers
586 views

Mountain bike rear wheel tilts after remounting

Backstory: Total newbie regarding repairing cycles and the proper cycling terminology, so please take that into account. Actual story: I had a fall and the rear wheel started touching the brakes ...
3
votes
2answers
114 views

MTB Manufactures and Upgrade-ability

I'm looking to purchase a new bike in the intermediate level and I'd like the option to upgrade all if not most of the parts over time. That said, I've read some concerning articles [sic] and I want ...
3
votes
1answer
236 views

What is the widest range 9 speed cassette?

My commuter rig is an old trek mountain bike that I've converted to fixed gear with an ENO hub/crankset. I am thinking about going geared for the winter. I have a rear wheel that I built last year ...
3
votes
1answer
145 views

Coping with mud in the face

I am not talking about swimming in mud. Just a damp trail or even wet pavement - and some modest speed - and the front tire function switches from steering the bike to throwing mud precisely directed ...
3
votes
3answers
150 views

Converting Mountain Bike for Road to complete in 33 mile mini triathalon

I have a very good mountain bike and like to ride trails. I recently signed up for a mini triathalon that requires a 33 mile road ride. I don't want to buy a new bike, so I was thinking about buying ...
3
votes
1answer
310 views

Why is my front Derailleur not shifting as smooth as it used to?

I have a Specialized Hard Tail 10' Model. When I ride and am shifting to the bigger gear on my front derailleur it isn't as smooth as it used to be or sometimes doesn't shift to the gear I'm going ...
3
votes
1answer
646 views

Bunny Hop, Stoppie or Wheelie? Which one to attempt first on MTB?

I am 21 years old. I'm overweight for my age..171 ibs. I have started cycling few months back and I'm lovin' it. I have a Merida mtb(mainly used on the road) I was thinking about practicing some ...
3
votes
2answers
1k views

Carbon Fibre Mountain Bikes

Has anyone had experience with carbon fiber mountain bikes? I'm still skeptical as to how robust they are. Is it true that a scratch will make the frame useless? And Trek has this process called OCLV ...
3
votes
3answers
201 views

Planting a foot when cornering: when and how?

Recently I have noticed the following. When doing extremely tight turns e.g. 90 degree trail turn, I tend to: Get out of my high saddle, position in front of it and low over the top tube Stick the ...
3
votes
2answers
931 views

What maintenance is required for a thru axle?

A thru axle is a hollow axle that gets clamped by each fork leg and through the hub. Like what a motorcycle has. Much stiffer and stronger design then the typical QR dropout. My sons newer downhill ...
3
votes
2answers
4k views

Replacing grip shift shifters on department store bike with thumb friction shifters?

I have a department store bike with a twist grip shifter (3 chain rings, friction shift and 6 sprockets, index shift - Torque Drive One derailleur) and I want to replace it. I am not able to get ...
3
votes
1answer
734 views

Using a bike with Trek ABP on a trainer

I was planning on doing my winter training this year on a mountain bike (for ergonomic reasons), but it occurred to me that the skewer for the Active Braking Pivot on my Top Fuel might not be work ...
3
votes
1answer
83 views

What is a shimano ispec shifter?

I know what a shifter is but I could not find a definitive answer on what an ispec shifter is or how is it different from a regular shifter. For example the 2014 shimano deore groupset says it has ...
3
votes
3answers
186 views

How do I stop my bike tires from puncturing?

I recently bought a specialized Stumpjumper 29 and its only been a few weeks but I've punctured the tire four times already. I think im getting the punctures from the trees and bark on the trail but ...
3
votes
2answers
408 views

Would like to custom-build a bike but I'm not sure on what parts to buy

Currently I have a 2011 Trek 3700 (no disc brakes) and just this year have gotten into riding mountain bike trails and would like to have a bike better suited for doing that. I'd like to keep the ...
3
votes
1answer
479 views

Will a road brake lever work with a v-brake?

I'm planning on changing my commuter handlebar to a drop handlebar. As the diameters are different, I need to know if the new brake lever will work with the existing v-brakes. (My intention is to ...
3
votes
4answers
2k views

How do I make a MTB shifter fit on a Road dropbar?

I'm about to buy a MTB, since we don't have cyclocrosses here in my country. I'd like to have a road dropbar, but can't spend money on a road shifter like tiagra sti. I know the mtb handlebars are ...
3
votes
1answer
582 views

Remote rising seat posts and heavier rider

I am looking at remote adjustable seat posts that I can adjust the height of using a lever on my handle bar. They have a high price tag. Examples are Rock Shox Reverb Seat Post and Crank Brothers ...
3
votes
2answers
4k views

Suggestion on buying a single speed 29er mountain bike

I'm interested in buying a single speed mountain bike for about $400-600. Can anyone recommend me one? I tried buying this http://www.redlinebicycles.com/bikes/mtb/2012-monocog-29er but it is all ...
3
votes
1answer
1k views

Tips for radial wheel truing

Several drive side spokes on a mountain bike rear were damaged the rear mech being pushed into the wheel by a rock, with one snapping completely. I've replaced the affected spokes and have managed to ...
3
votes
2answers
263 views

Rear gears don't turn anticlockwise

I've taken the rear wheel off my bike but the rear gears are stuck and do not spin freely anticlockwise. It had been out of use for about 4 days, kept in a dry garage. I took the wheel off because it ...
3
votes
3answers
1k views

Where should I mount a mirror?

What do you recommend as an optimal point and orientation for mounting a rear-view mirror? I'm open to handlebar-, glasses-, or helmet-mounted. Some of the considerations, as I understand it, are: ...
3
votes
3answers
889 views

Which type of handle bars are best for off-road & road use?

There are quite a lot of types of bars. Some best bit for aerodynamics, some best fit for control, some offer significant amount of positions. I am looking to change my handlebars to the best fit ...
3
votes
2answers
184 views

Maintenance Schedule

There are many questions that deal with routine/ preventative maintenance (including this one which is probably the most comprehensive Optimal Maintenance Schedule) but none deal with issues related ...
3
votes
4answers
184 views

Alternative uses for an aluminum MTB frame

Any alternative use for old mountain bike tyres and inner tube? So my frame has a large crack near the headtube and I am replacing it. Could I use the frame in any other way? E.g. give it away ...
3
votes
2answers
247 views

Is it possible to drop a foot in corners while using clipless pedals?

My friends convinced me to try clipless pedals, that I never trusted too much (BMX background). Now while I'm getting used to them and experience very funny falls, I try to figure out, can a ...
3
votes
2answers
1k views

How do I align my front brake disk with the caliper?

I have manual Avid disc brakes. I took my front wheel off like I've done hundreds of times. When I put it back on the wheel is aligned properly with my fork, but the disc presses against one of the ...
3
votes
5answers
688 views

Which footwear is the safest for summer cycling?

This morning I could not find my training shoes. So, I used my sandals. I found that the sandals not only kept my feet cool but there was no pedal slippage as I had expected. The more I think about ...
3
votes
2answers
699 views

upsweep and backsweep for mtb handlebars

Characteristics of the following bars for MTB are: • 780mm wide • 30mm rise • 5˚ up-sweep • 7˚ back-sweep I know what effects do the width and rise have on the feel and riding. But what about ...
3
votes
1answer
323 views

Bike type suggestion for packed limestone trails

Sorry, for the beginner question. Where I live (Ontario, Canada), I am lucky enough to have a number of packed limestone trails (former railways). Those are fairly flat and great for bicycling. They ...
3
votes
1answer
292 views

Is my disc brake caliper correctly mounted on the frame?

I have been in the process of upgrading my bike a bit. A friend of mine convinced me to upgrade my brakes from my stock Shimanos to some disc brakes. After having a look around and asking question, I ...