I removed the pedals of a Göricke bike from 1934 or 1935 (according to the bike number). It has a Glockenlager (What is that in English? Bell shaped bottom bracket?) as seen in the picture. The crank ...
Do I need to replace cranks after newly installed pedals torqued out along with some threads in my crank?
I must have crossed threads like an idiot when I installed pedals for my new SPD cleats. After several miles of riding (~100-200 m), I suddenly got this inexplicable rolly, bumpy motion in my foot. ...
When I pedal forcing a little with my right leg, the bike makes a noise that I don't know how to describe. I'll try to do it. It's like: a short "ting" a tiny bell if a small rock hits the down tube ...
After a loose bottom bracket and some prevailing knee pain I have made a few adjustments to the bike. I have managed to greatly reduce the pain in my left knee but the right still has some pain. I ...
I have a Focale44 fixie with a single speed on the other side of the gear (this is called a flip-flop I think?) and I LOVE it so far! I've ridden it for about six months and haven't had to fix ...
In the last 6 months I have been getting really bad noises, creaks, clunks, etc coming from somewhere around the spindle connecting to the crankshaft. Every time I put pressure down on the left hand ...
I've part stripped, and ultimately crossed the thread on my crank and can't remove my pedal now. This was done whilst riding and then trying to remove the pedal from the damaged crank. I figure the ...
I'm trying to troubleshoot a weird barely-felt click on my cruiser. The nest step of the process is to swap out the pedals and see if the problem goes away (if not, the problem is likely the bottom ...