The threads on my bike's pedal crank just became fully stripped and the pedal fell off, though the pedal itself is fine. Is there any way I can fix this without fully replacing the pedal crank?
I removed the pedals of a Göricke bike from 1934 or 1935 (according to the bike number). It has a Glockenlager (What is that in English? Bell shaped bottom bracket?) as seen in the picture. The crank ...
After 2 years of good use, left crank arm on my FC M542 crank set has started to get loose quite often (cca 500 km). It is usually indicated first by few now an then click-clanks somewhere in the ...
I have already read My crank fell off, how do I re-attach it?, but it did not answer my question. I was biking up a hill in first gear, and I felt my left crank was a bit loose. Never having had ...
I was out riding on my mountain bike when my crank unexpectedly fell off (video). How do I reattach the crank? There's a torque range specified (25-30 Ft-Lbs): how critical is this? I don't own a ...
A friend called me up yesterday after a mis-adventure during his attempt at a bottom bracket overhaul. He stripped out the threads on the (left) crank arm while using a Park crank puller. In a pinch, ...