My daughter's bike has a threaded headset, and I don't know what tool I need to adjust it. As you can see from the picture, there are the following parts in the stack: a knurled ring, which ...
I feel like there are almost as many bike multi-tools out there as there are bikers. In a single trip to REI, I found nine different bike tools each ranging from only four to over thirty individual ...
As shown in the photo, what tool do I need to take this rear hub apart? I assume I need a tool which will fit in the 4 notches. The problem I am trying to fix is that if you pedal, the rear cog spins ...
Are there any recommendations for where I can buy an inexpensive bike stand clamp? I do not know what they are exactly called but the actual part that the bicycle is held onto in a work stand.
Given that pedal threads are different on the left and right pedals: the right side pedal has a right-hand thread (removes counterclockwise, installs clockwise); the left side pedal has a left-hand ...
On one of my recent ride, my bike broke down. My rear derailleur got pushed into the rims and broke. Since I have never gotten stuck like that before, I've never bothered to take anything with me ...
As most of my riding is limited to intra-city commuting (on bus routes) or on bike paths, I have not really faced a dire need for a repair kit while riding. I am looking into pulling off a three hour ...