Repairing your bike when something is broken. REPAIR is not the same as MAINTENANCE, a separate tag. Repair is what one does only when something is broken. Maintenance is what one does on a regular basis.

learn more… | top users | synonyms (2)

0
votes
0answers
27 views

Best way to connect a wagon/ hitch [duplicate]

I welded a wagon for a bicycle. What is the best way to connect it so there will be free movement, but it will stay strong
1
vote
4answers
333 views

Rebuilding a rear wheel

My rear hub is damaged. I have not yet inspected the source of the damage, but the wheel is moving sideways when rotating (a LOT), plus I rode it like this for about 35km. Therefore, I find it ...
0
votes
3answers
99 views

Chain falls to the outside of the chainring, but I can't reproduce the problem

I have a Dahon Speed P8 that I use for touring Japan, which has about 3000km on it. The bicycle has 8 gears on the back, and 1 gear on the front. Note: I love riding my bike, but honestly (and ...
6
votes
4answers
108 views

Bicycle maintenance notes, technical book: do you have one?

Well, I drive a car and I have a technical book (maintenance) and automatically I want to do the same for my newly bought bicycle. I would love to track repairs, maintenance schedules, changed / added ...
5
votes
2answers
1k views

What to do about a stuck chain link on 10 speed chain

I put a new chain on my bike and after 3 rides or so, I developed a stiff link. I'm not sure what caused the issue, but now it barely bends at the pin at all, unless forced. It causes skipping ...
0
votes
1answer
161 views

Fixie chain stuck between cog and hub

I had my chain jump off on my fixed gear when I hit a pothole, and it's gotten completely wedged between the cog and the flange of the hub. I've removed the lockring but can't get a chain whip around ...
1
vote
1answer
73 views

Twist shifter cannot shift down – what might be the cause?

My son's bike is stuck on 7. When we try to shift down to 1, there are no clicks. It just shoots right back to 7. This is a dial/twist/grip shifter, not a trigger shifter. I do not think it has ...
1
vote
1answer
40 views

Campagnolo Ergopower Chorus 9 inaccurate shifting

My Chorus 9 Speed Ergo-power (~2005) got inaccurate during shifting. The local bike repairman couldn't get the dérailleur to shift properly. Sometimes the chain don't jump down or up after shifting. ...
0
votes
2answers
192 views

Rebound doesn't work on a Rock Shox Recon Air

On my Trek Fuel Ex6 I have a Rock Shox Recon Air fork with rebound valve. The valve has a 2,5mm allen key for adjustment, but it seems broken. The Trek Suspension Setup Guide tells me to set the ...
1
vote
1answer
55 views

What thread is the rear wheel axle nut?

My father is trying to repair his old '65 (we think) Schwinn 3 speed. The only problem is he has not been able to get a replacement nut for the rear wheel axle. Local hardware stores have been unable ...
2
votes
1answer
2k views

Shimano Nexus Inter-3 internal gear hub stuck in second gear?

The situation My Shimano Nexus Inter-3 internal gear hub is stuck in second gear (it's a 3-gear hub). When I take the external cable housing apart, I can move the pin that goes inside to change gears, ...
0
votes
3answers
85 views

Cannot locate mysterious crunching/grinding noise

I've seen other posts on this general subject. My BB seems tight, new chain installed by bike shop, gears all checked ... I am second owner of this Raleigh so no knowledge of past usage or ...
0
votes
2answers
106 views

Axle flex under load normal for freewheel hub?

When using a freewheel'd hub is it normal for the drive side of the axle to flex a little bit? I replaced the kickstand on my bike and the new one sits closer to the rear tire with about 2 mm ...
10
votes
2answers
9k views

Chain slipping off derailleur jockey (need suggestions ASAP)

Last week, I had to abandon a training ride due to my chain slipping off my rear derailleur jockey wheel. This would only happen when shifting, and most often when either shifting chainrings or ...
16
votes
7answers
3k views

What tools on a multi-tool do I actually need?

I feel like there are almost as many bike multi-tools out there as there are bikers. In a single trip to REI, I found nine different bike tools each ranging from only four to over thirty individual ...
0
votes
3answers
126 views

Why does my Rear bike tire slow down when Pedaling?

I just replaced a flat on my rear road-bike tire. I had also tried to replace the rear axle, By removing the axle completely, to a quick release lock but realized the axle that had been installed with ...
7
votes
5answers
1k views

How can I learn to take care of an old (70s era) road bike/get it back to working condition?

I found my mom's old road bike from the 70s tucked away in a corner of our attic. It's not in great condition and is pretty rusty. I don't know a lot about bikes from a mechanical or upkeep point of ...
4
votes
1answer
111 views

How do self-sealing inner tubes work?

How do self-sealing inner tubes work? I understand it protects against objects up to a certain length, but do I need to still remove the offending object eventually? Or do I need to leave it in? Are ...
12
votes
6answers
17k views

Removing a stuck pedal

I'm sure this question must have already been answered somewhere here, but it doesn't show up in any search results I make... I'm changing the pedals on a 40 year old bike. Pretty sure the pedals are ...
2
votes
1answer
112 views

Damaged (bent) fork dropout - what are my options?

I have an old Dunlop mountain bike - I'm not sure whether it's a steel or aluminium frame. (I have had the bike since I received it as a kid probably 20 years ago.) For some time, I've had it stored ...
0
votes
2answers
69 views

cable too short to reattach into a sturmey archer 3 speed shifter

I've just been given a Rayleigh Chiltern. The only problem is, the cable has unattached from the gear shifter. I Googled how to re thread, but the cable isn't long enough at the top end to slide right ...
-1
votes
2answers
154 views

How did this happen to my chainring?

So, this happened. All of this group of bolts but the one you see came out of my crankset: My question is.. how exactly do all those bolts wriggle themselves loose !? How do I determine what ...
0
votes
1answer
113 views

Is my six-year old touring bike worth repairing?

My touring bike (which I use for commuting) needs repairs which will cost £200... half the price of a new one. I am not mechanically-minded.... and I am too busy and too old to learn! A new bike ...
7
votes
6answers
10k views
0
votes
3answers
244 views

Water inside bike frame

My latest "project" involves my bike, i.e. I want to perform a complete renovation of it. This involves changing rim, complete shift group, brakes, hubs, carrier etc, just keeping frame, seat post and ...
0
votes
3answers
142 views

Trouble Removing bottom bracket. Is it my Tool?

I'm having trouble removing my bottom bracket. I'm using quite a bit of force as far as I can tell. But neither side is budging. The bike is a 2011, and I've never removed the bottom bracket, but ...
2
votes
1answer
82 views

Mtb weld repair Al frame

I am looking at a full sussy mtb with an Al frame, it's cheap but needs to be welded,as the frame is cracked, it's a cult insomnia. 52 inch. Anyone weld a mtb before, it's cracked on lower bracket, ...
1
vote
1answer
138 views

Repairing a damaged cone nut

So I've got a nice hybrid bike that I picked up secondhand, was doing some maintenance on it to get it up and running and thought I'd replace the bearings in the rear axle. In doing this, I've found ...
0
votes
1answer
83 views

creaky sound when cranking [duplicate]

My bike seems to all of a sudden developed a creaking sound when I pedal. It appears to be there in every gear. Bu t I noticed it appears to only happen when I put pressure on the left pedal. What ...
6
votes
5answers
2k views

How long should spokes last?

Trek Fx 7.3, 1 year old, 1900 miles 3 days short of my 1 year bike purchase anniversary I discovered some broken spokes on the rear wheel. The bike shop gave me a new wheel they had in the shop, an ...
0
votes
2answers
102 views

How to fix gears on a Kilimanjaro bike

I've just bought a Kilimanjaro bicycle for cheap. One reason it was cheap, I expect, was the gears system. It's only partly functional, and I don't understand why. I would go to the bike shop with it, ...
3
votes
1answer
3k views

What does vulcanizing solution in patch kits consist of? Can I buy it?

I have a pile of old patch kits for inner tubes that are complete except for the little tube of "vulcanizing solution" that comes in patch kits. With time, these tubes crack, or have a cap fail to ...
0
votes
1answer
135 views

guide to correctly assemble a Walmart bike [closed]

I bought a genesis max air from Walmart last fall used it a few times before the winter and two weeks ago brought it back out. For the last two weeks me and the wife have been riding about 8 miles ...
20
votes
9answers
67k views

How to get a very tight tire back on the rim?

I needed to change the tube as a consequence of a flat tire and I am in the situation that it's just impossible to put the tire back on the rim. In almost ten years of experience with road bikes and ...
0
votes
2answers
61 views

Restoring a 16"

This here is my 16" bike which I'm going to at least try restore. I've put some wider bars on it, fixed loose things etc. My friend removed the pedal back but I don't think he has put it back ...
0
votes
1answer
53 views

replacing tires and tubes [duplicate]

I own a trek 7000 hybrid and was wondering if there are aftermarket parts i.e. inner tubes and tires that will work for it. the wheels, tubes and tires are all bontrager if this helps any suggestions? ...
0
votes
2answers
90 views

Shifting 1>2 does nothing, shifting 2>3 puts me into 2nd. What's wrong?

I'll be in first gear on my front derailleur, and shift up to 2nd. Nothing will happen at all. Then I'll shift up to 3rd, and I'll finally switch into second. 3rd gear is inaccessible. What could be ...
2
votes
3answers
748 views

Townie gearing suddenly too easy

So the rear wheel (26x2) on my Electra Townie 7d broke its axle, and I ended up replacing it with a new 26x1.5 wheel, that being what the LBS had in stock. The bike seems a bit faster, which is nice, ...
9
votes
4answers
9k views

How can I tell a bike is safe after a crash?

I was recently in an accident where a car pulled out on me. I hit the car around the front wheel and me and the bike went over the bonnet and landed on the road, the other side of the car. I was ...
4
votes
2answers
12k views

Deformed/uneven/bumpy wheel/tire/tube, how to diagnose or repair?

My bike has a deformation in the rear wheel, almost surely not due to the rim. At some point the tire has a "valley", causing it to bump instead of rolling smoothly. I'd like to understand if I have ...
10
votes
9answers
7k views

Why does the glue in a puncture repair kit dry up so quickly?

With puncture repair kits, generally you get like 6-8 patches and a tube of glue. The only problem is I can really only use the glue for the first patch because once it opens, it just ends up drying ...
3
votes
2answers
594 views

I have a broken my drive side crankarm - what do I need to do?

I recently had to dash home for a minor emergency. I noticed that one pedal was a bit wobbly but I had no choice but to push on. Once I got home and the emergency had been dealt with I noticed that my ...
1
vote
1answer
797 views

Replacing Tiagra 9-speed shifter with 9-speed 105 or Sora shifters

So my handlebars were stolen from my Salsa Casseroll the other night, levers and all. (Argh.) The bike has a Tiagra 9 speed triple drivetrain, and Shimano discontinued Tiagra 9 speed hardware, leaving ...
3
votes
3answers
3k views

Broken rear axle. Why does it happen and is it worth trying to repair?

So I'm taking the time during the holidays to overhaul my commuter bike. The whole drivetrain was full of old oil, road salt and grime so I decided to take the whole thing apart starting with the back ...
2
votes
4answers
4k views

How can I remove a stuck rear cassette?

I've been trying in vain to remove a rear cassette that I myself installed about a year ago. I may have over-tightened the lock ring and now I can't remove it no matter what position I hold the ...
4
votes
2answers
14k views

How do I determine my wheel size

Would someone explain wheel sizes. If I am not mistaken, the wheels on my Trek 520 touring bike are 700C. There are no markings, and of course, no documentation of any kind. I assume 700 means 700mm, ...
0
votes
1answer
139 views

Possible Broken Shifter

My right Shimano shifter is now loose and clicking it doesn't do anything to the rear derailleur. I've checked the derailleur and it still works fine. How can I fix the shifter? Edit: It's a road ...
0
votes
4answers
757 views

Crank threads stripped - both pedals fell off

Something really strange happened to me - 2 years ago I bought a bike (Carrera Gryphon Hybrid from Halfords). I had just about 100 miles on that bike the month I bought it and than I locked it to a ...
2
votes
2answers
239 views

How can I fix panniers that have got holes in

I've got some Crosso panniers that have got quite a few holes in. I once fixed a drybag backpack with patches of leather and industrial strength glue which worked like a treat, but I've forgotten what ...
1
vote
1answer
142 views

Peculiar feel when pedaling

I ride an early 90s Scott Unitrack CST with the original Shimano Deore drivetrain it came with. Same as this one. When pedaling, the right pedal has a peculiar feel like a sudden inward jerk at a ...