Bikes designed for road use only. Could be any road-only bike, but typically means bikes optimized for speed / racing / club rides with drop handlebars, narrow tires and a crouched-forward rider position.

learn more… | top users | synonyms

11
votes
2answers
389 views

What is the difference between a horizontal top tube and a sloped one?

Some comparable bicycles have a crossbar (top tube) that's horizontal: Others have one that's sloped: What are the reasons for either frame design? Is it merely style preferences? Or is there ...
3
votes
3answers
536 views

Single pivot brake with handlebar levers (Resurrecting an old Colnago)

I have an old Colnago I want to resurrect, which after some Google-ing I have discovered is very similar to the bike here (but in blue): I want to replace the drop bar brakes with "standard" brakes ...
3
votes
2answers
164 views

Where can I ride Paris-Roubaix style cobbles in the UK?

Watching the Paris-Roubaix and the Ronde van Vlaanderen recently made me think I'd like to try out my road bike on similar-style cobbles, just for a laugh. Is there anywhere in the UK (I live in ...
1
vote
2answers
132 views

Road Bike or Hybrid Bike For Paving Stone

I haven't got any experience for these bikes. I want to buy a bike but I can't decide because I will use on paving stone. For example here. I'd like to buy a hybrid bike however I saw this bike in ...
1
vote
1answer
279 views

Replacing SRAM Red chain set with Ultegra - bottom bracket?

I have a cyclocross bike with an Ultegra 6700 chainset and a road bike with SRAM Red. I'm looking to get a Stages Ultegra power meter (left crank arm mounted) that I can swap between both bikes. This ...
0
votes
2answers
114 views

new tires for schwinn phocus 700C

Was wondering what heavy duty tires someone would recommend. I have been using stock tires and they have blown a leak a number of times in the last six months. Love the bike, just want more sturdy ...
4
votes
1answer
325 views

What went wrong with my bottom bracket spindle length calculation?

Here's the facts: My bike frame requires a 70 mm Italian threaded bottom bracket I'm going to use a Nuvinci N360 IGH which requires a chainline of 49 (± 0.5) mm. I have Andel fluted cranks, which ...
2
votes
2answers
151 views

How to compare old road bikes [closed]

I'm looking for a retro road bike and found a Gudereit T30 with a steel frame, 12 gears, and Mavic rims. How can I compare this bike to more common bikes to figure out its value? Comparing the ...
1
vote
1answer
212 views

Bike for mixed use

I've been spinning for the last two years and looking to purchase my first road bike, comparing road, touring, cyclocross and hybrid. I won't race, but do look to ride weekly & take some 40-80 ...
1
vote
0answers
186 views

Low gearing setup for road bike with Shimano dual control

Question: What is my best bet for a crankset, given the following requirements for a road bike I am setting up: 68mm "English" thread bottom bracket Shimano STI "brifters", 2x10 (I already have ...
1
vote
2answers
223 views

Cube Agree GTC - Tri-Bars

I have a Cube Agree GTC (2012), and I would like to buy some tri-bars for it. I've read that this model ( Although, on second thoughts, maybe this is a newer model...) has compatibility issues with ...
9
votes
3answers
4k views

Are road bikes capable of being ridden on gravel?

I am new to road bikes and was wondering if these bikes are capable of riding on light gravel or whether I will get flats? Does it depend on the tire material or are generally all road bike tires for ...
2
votes
5answers
1k views

Speed and comfort of a racing bicycle?

I just saw this guy called Jason Rourke breaking the record of 112.94mph (181km/h) on his bicycle. I wish I could have such a bicycle to ride, but I have never ridden a racing bicycle with gears. I ...
4
votes
3answers
621 views

Best 9 speed cassette for fast & flat

I have a road bike with a 26/11 9 speed SRAM rear cassette. I cycle in Cambridgeshire on a daily basis and it's very flat. I find that I never use the hardest cog, leave the chainring on the biggest ...
4
votes
3answers
549 views

Transition between hybrid bike and endurance road bike

What are the different skills I need to develop when transitioning between a hybrid bike and an endurance road bike?
3
votes
2answers
589 views

Handlebar stem : height vs length

I want to decrease the reach of my handlebars. Does it matter whether I increase the height or get a stem with a smaller length(extension?) on my bike? And is there any way to calculate the ...
4
votes
3answers
96 views

Does 1.2cm of additional frame stack make a large difference to the ride of a bike?

I don't like the amount of handlebar drop on my current road bike. I am looking at a new bike that has an additional 1.2cm of frame stack (height). Would this 1.2cm make much difference in the ride of ...
-3
votes
2answers
186 views

Please help me pick one of these bicycles and store benefits [closed]

I am looking for a bicycle to commute probably two days a week to work on and then use sometimes in the evening and on weekends. I was thinking of scooter or motorcycle even but when I sat on them I ...
0
votes
1answer
269 views

Trek 3700 XC Hardtail - looking to convert to temp road bike [duplicate]

Bike Description Front suspension, knobby tires Frame: Aluminum w/semi-integrated head tube, bi-oval down tube w/integrated gusset, rack & fender mounts, disc compatible dropouts, replaceable ...
1
vote
1answer
130 views

Did the Giant Trinity A1 come with a derailleur hanger?

I am putting a bike together and have it all apart but don't see the derailleur hanger anywhere. Did I lose it or did the bike not come with it? If it didn't come with it, why not? Thanks.
-1
votes
2answers
573 views

What components are required to upgrade from a 14 speed to 24 speed?

I made the mistake of buying a 14 speed bike... I live in WA so it's hills everywhere you turn, took it for a spin yesterday and while on flat surfaces it felt great, but taking hills or going down a ...
0
votes
9answers
2k views

Are there any manufacturers of steel road bikes today? [closed]

Is there any major bike manufacturer that still makes steel road bikes today? The frame of my old Bridgestone got cracked and the crack is too close to the alloy BB lug for me to be able to weld it. I ...
0
votes
2answers
256 views

Which way does the seat clamp go on the post?

I have one of the older style seat clamps, the one with the bolt all the way through it with two male ends that tighten on either side. I'm not sure if the bolt side goes to the front of the post or ...
7
votes
5answers
254 views

How can I bike in Winnipeg, Manitoba, Canada?

I've seen posts here about winter cycling, but I live in Winnipeg, where the weather drops to -50C (-58F) and we experience gale force winds. How can I bike in these conditions?
-1
votes
4answers
421 views

Are there any parts I should replace on my SCOTT Metrix 20?

I've recently bought the SCOTT Metrix 20. I'm usually having 3 road trips per week of 30 km / 18 miles. My goal is a total of 3500 km / 2200 miles per year. Question: Are there any obviously weak ...
0
votes
1answer
274 views

How does the geometry of cross bikes affect on-road handling?

I'm planning on getting a cyclocross bike for commuting because my road bike is suboptimal for riding in rain and snow. A bike shop employee told me that cross bikes have worse geometry for riding on ...
-1
votes
2answers
829 views

Is deep v wheels safer then the standard fixie rims

I'm thinking about getting a new fixie but wonder what size rims I should get. I've heard that deep v wheels are easier to handle then just the standard rim size.
1
vote
1answer
197 views

Campagnolo Athena 9 speed compatibility?

I own some NOS shifters, Campy Athena 9 speed, from 1998 i guess. do you guys know if I can use it with any campagnolo front/rear derailleur? how do I know what is compatible?
0
votes
1answer
112 views

Road Bike £600 or under [closed]

I've been serious about riding for the last year however have taken a while to save up. I want a bike that I can rely on. I ride on average 7/8 hours a session. I'm 20 year old male and 182cm.
1
vote
2answers
341 views

Does height of bicycle affect the energy we put to ride?

I used a road-bike (gearless) and its height was even not reaching to my waist and I was becoming very tired even after 10 min. of cycling (in city). I remember I have read somewhere that angle of ...
0
votes
1answer
133 views

Where can I purchase/download UCI Pro Tour/pro cycling race footage? [closed]

I love watching old races - they're especially great for long sessions on the trainer. However, I can find only a few stages/races on Youtube, and most of the videos are simply highlights. Where might ...
4
votes
1answer
374 views

Derailleur guard on road bikes?

I live in an area with lots of debris, dodgy paving, and rain, and to make matters worse, I fall down sometimes (I know!). The main things that get damaged, of course, are the brake handles and the ...
8
votes
2answers
355 views

How can I evaluate a used road bike i intend to buy?

I intend to buy a used road bike, but don't know anything about bikes. So how can I buy a good one with a reasonable price? How can I evaluate the one I intend to buy? Thank you
4
votes
1answer
98 views

What are the original components to a 1953 Schwinn Paramount?

I have a 1953 Schwinn Paramount that I inherited and have been riding as my daily commuter. I think most everything is original, but am not sure. Where can I find out what the original components ...
4
votes
3answers
1k views

What is a good bike for college?

I'm looking for a good bike for college. I need to be able to go across paved roads, brick roads, cut across grass- and possibly jump down 5-6 stairs. This video is from the school I plan to attend: ...
6
votes
3answers
548 views

How is cornering on the road different than cornering on dirt?

The general advice about cornering is to lean the bike, not the body, to put pressure on the outside foot, and not to brake or brake only with the rear brake if absolutely needed. --me There ...
5
votes
1answer
281 views

Ultegra 6700 Left Side Crank with SRAM Red

I'm considering buying a TT bike that has a full SRAM Red group. I'm wondering if it's possible to use my Shimano Ultegra 6700 left-side crank in place of the SRAM Red crank. Why? I've got a Stages ...
9
votes
7answers
467 views

Repeat Punctures

I was cycling home today and I got a puncture a few minutes in where the air slowly drained rather than instant rim to concrete! Fitted a new tube and 10 minutes further down, exact same issue. ...
2
votes
1answer
121 views

Quiet Components/Configurations

Phrased towards someone looking to purchase a new commuter bike, I prioritize a quiet smooth ride when possible. One of my past issues is that bikes are often great on the test ride but pretty ...
5
votes
1answer
833 views

Fixing damage to brake rim surface

somehow the alloy braking surface of my rear wheel's rim has got a series of quite shallow lacerations, less than a mil' deep bunched quite closely together (the effected area is no more than 1/8 of ...
4
votes
3answers
1k views

Cyclocross racing with fixed gear road bike with cross tires

I would like to take part in three local cyclocross races in the coming weeks but have a bike dilemma: Should I convert my track frame to a new fork and put one cantilever brake on it and change the ...
6
votes
5answers
8k views

How to prevent wrist pain on road bikes?

When I started bike-commuting with my road bike I developed chronic pain in my wrists. It probably took a year to go away, and now I have been free of complaints for several years. My wife just ...
1
vote
2answers
208 views

Is it cost efficient to Convert a Huffy Mens mountain bike to a road bike like the one I rented at Orange Peel in CO?

While on vacation in Steamboat Springs CO I fell in love with a road or trail bike I rented and so did my family. We road for miles on a trail and it was great. I want to convert the mountain type ...
6
votes
2answers
2k views

Cyclocross frame size vs. road bike frame size

I'm in the market for a used cyclocross bike to use as a winter bike, and so I've been browsing craigslist. I generally ride a 56-58 cm road bike frame, so I turned down an otherwise good deal ...
1
vote
0answers
127 views

What to upgrade on a Raleigh MV7? 20"

I am undecided to upgrade the BB and crank or change a wheelset. Any advice on what might help me spend less effort pedaling? I actually find a steel 26" MTB easier to pedal.
1
vote
1answer
551 views

Will this Retrospec Siddhartha bike suit my needs? [closed]

This is my first question on here so please take it easy :) I will be relocating to Surrey (UK) in 2 weeks due to being offered a new job (as a software developer) and I am thinking of (finally) ...
5
votes
1answer
9k views

Difference between Cyclocross, Touring, and Road Bikes?

My question is "What is the difference between Cyclocross, Touring, and Road Bikes? Also what are their intended uses (their place in the cycle 'community'?)" I have looked at What is the difference ...
2
votes
1answer
139 views

Can a long stem be used safely with a short head tube?

I picked up a 91 Rb-1 50cm down tube and 53cm top tube but the reach is a little short. A new stem was my best option so I picked one up. the height of the stem seems too long visually for the head ...
3
votes
1answer
575 views

How do I remove a quill stem?

(I recently got an old Favorit road bike (made in Czechoslovakia) and started restoring it. In order to give the frame a new coat of paint, I need to strip it down from everything.) I'm stuck with the ...
0
votes
1answer
188 views

Upgrading road and cyclocross bike with a single carbon cross bike

I have the potential opportunity to buy a full carbon cross bike (fairly new Specialized Crux Pro, specs say around 17 pounds; not sure what it would be with pedals, etc.). I currently own (a mtn bike ...