Bikes designed for road use only. Could be any road-only bike, but typically means bikes optimized for speed / racing / club rides with drop handlebars, narrow tires and a crouched-forward rider position.

learn more… | top users | synonyms

0
votes
1answer
104 views

Pitted rust on frame [duplicate]

Hello I have some small pitts of rust on my 1980 Raleigh royal frame. I don't want to strip the paint and sand blast it are there any non invasive treatments? Some of the chrome surfaces also appear ...
4
votes
1answer
190 views

Should I always ride on the designated bike path?

I just had my first ride last week end and I generally rode pretty much in a defensive way, I always followed the cycle paths, but to be honest I enjoyed much more riding on the street for 2 reasons ...
0
votes
1answer
46 views

Best places to ride in the US [closed]

What are the best places to ride in the USA? (Road and mountain)
2
votes
2answers
395 views

Can I put a rack on a carbon road bike?

I got a carbon-framed Kestrel Talon Road Bike recently but I also want to use it for commuting to and from work and I want a place to put my lock and other stuff on the bike. Is it possible to have a ...
1
vote
2answers
236 views

first road bike [closed]

I want to buy my first road bike. On craigslist I found two bikes that seem good deals, but they are pretty different so I'd like some advice. One is a Klein Quantum, I believe 1990, with Dura-Ace ...
1
vote
2answers
150 views

Is this cracked rear derailleur safe to use

So I've been building up a late 80's steel frame to a modern 11 speed, but still using downtube friction shifters. After doing a few runs up and down my street all felt OK so I decided to take it out ...
3
votes
2answers
218 views

Why is this ring used near the Crankset?

I couldn't comprehend, why this ring is needed. Please refer the pictures. Its a road bike (I am not sure if it matters or not, so felt like mentioning it). In my Bicycle, this ring usually comes ...
2
votes
1answer
198 views

Is it 'safe' to use a 700 x 47c tyre on a rim with inner width of 15mm?

Looking to upgrade my tyres on an old roadie mash up to something chunkier so I can handle some off road sections on a ride coming up, currently it has a 27 x 1 1/4 front tyre and a 27 x 1 3/8 rear ...
0
votes
1answer
153 views

Is there a specific cyclocross wheel?

If you want some versatility regarding a bike (I have a Fuji sportif) what sort of wheels should I be looking into? I know there is some technicalities regarding road vs cx riding but if the bike can ...
1
vote
1answer
105 views

MTB Tyre Safe for Wet Roads

I ride %50 on road, %50 XC. When the roads are wet/rainy the bike dances with me. Thus, i want to change the tyres. What I want is safe (in especially wet/rainy conditions) drive both on-road and ...
2
votes
1answer
69 views

Bar diameter for Genesis Croix de fer 20 (2015)

I would like to switch my stem for angle adjustable one and I am having trouble identifying the clamp size for the Gensis, Croix de Fer 20 (2015). I do not see the stem/bar clamp spec listed. There ...
5
votes
2answers
168 views

Is my pump faulty or my tyre?

I have recently bought a Specialized women's road bike and for the last couple of weeks was borrowing my boyfriend's hand pump with no real issues. Last night I finally purchased my own (Topeak ...
3
votes
1answer
189 views

Fettling issues - slow shifting rear gears while riding

I've recently had an issue with my gearing, struggling to shift down onto the last few cogs on the cassette. I've got a Shimano Ultegra 6800 groupset, but when I shift whilst riding, I get a "tick-...
0
votes
2answers
241 views

Can anyone help me identify my bike please?

Can anyone help me identify my bike please? It has a slight story attached as it was one of the bikes in the new Lance Armstrong film. It was badged up as a Gazelle TVM (and as far as I can see, re-...
1
vote
2answers
148 views

upgrade my road bike, compatible parts to upgrade in phases?

I received a used road bike that functions, but not well. I completed a triathlon and lots of practice rides, but wanting to upgrade the components. The crankset is ultegra 6500/170m. The shifters ...
3
votes
1answer
415 views

Best Time to buy new bike? [duplicate]

I have been looking around bikes for a while tried about 10 bikes already and rode about 10 miles on each of them and I think I have come to a conclusion about which one to buy (or did I?) But the ...
2
votes
2answers
208 views

Steel road bike with frame that hides cables

I'm trying to recall the name of a bike maker that I had found while researching steel bikes a few months ago. Their bike had a frame that hid cables. i.e., the frame had holes to run the cables ...
3
votes
1answer
89 views

Shimano Sora 3500 (3x9) and Alivio front derailleur

Please help rebuild my bike :) I have Scott Sub 30 2011 http://www.evanscycles.com/products/scott/sub-30-2011-hybrid-bike-ec025449 and right now I would like to change shifters to Shimano Sora 3500 (...
6
votes
1answer
396 views

Mixed pair of sintered and organic brake pads for disk brakes

I am researching for a new road bike for myself, trying to identify the must-haves from the nice-to-have features. Disk/Disc brakes are on the must-have list, but the descriptions of brake pads are ...
4
votes
2answers
248 views

What brand/year/make is this road bike?

This is a mystery frame that I got and built with a lot of spare parts I had. Can someone help we identify it? Also the rims are 700c.
6
votes
1answer
245 views

What Threadless adapter should I use?

I want to replace the quill stem on my Roadbike with a Threadless head post. The measurement shows about .8 inches. Does a 1 inch adapter mean it is converting to a 1 inch diameter or does it mean ...
7
votes
4answers
660 views

To Cold Set or Not To Cold Set?

I have a Trek 620 (Reynolds 531 lugged steel frame) from the mid-80s the rear dropouts are spaced at 126 mm. I'd like to be able to run an 8- or 9-speed cassette and I was wondering about the issues ...
5
votes
1answer
154 views

How to prevent loose brake cables with a single pivot side-pull mechanism?

I recently bought a second hand bike and am now tweaking it to my liking. The bike has single pivot side-pull brakes, but it has a straight steering bar with regular brake levers (very similar, if not ...
2
votes
1answer
63 views

I've recently bought a 1980 Raleigh Royal I have some questions. (brakes & pannier)

will a 29er rack fit 27x1 1/4 wheels, I've been looking at the axiom streamliner range as the frame has no specific mounts, although it does have an anchor point on the rear dropout. The brakes are ...
1
vote
2answers
218 views

Using Loctite for integrated head set and bottom bracket installation

I'm in the process of building up a new bike from scratch. Since the last time I have done this many things have changed, reading varios forums and watching numberless videos on YouTube have not ...
-1
votes
1answer
150 views

How much is a Trek Alpha aluminium 58cm road bike worth? [closed]

Someone sold me a Trek road bike for $200. The bike says Alpha Aluminium on the frame and the front forks say Bontrager. I tried looking it up on the internet but didn't have much luck. I'm looking ...
2
votes
2answers
138 views

Tri bike or track bike?

I am in the verge of buying an Argon18 E-114. Can anyone please advise me as to whether it is a track or a triathlon bike? Looking at the hub spacing on the rear and the bb height it seems to be a ...
1
vote
1answer
114 views

What kind of crankset to get for this bike?

I have a Schwinn Volare 1300, bought from here. So the pedal on my crank arm came off today, when I tried to screw it back on I noticed that the hole where the screw goes has become smooth and does ...
3
votes
3answers
114 views

Crank axle cracked on 1972 Centurion, looking for guidance on how to replace

As I said, I have a 1972 Centurion. Today while riding I hit a pothole as I was coming down on my left pedal. I immediately felt like my pedal was moving around in ways it shouldn't. Stopping to look, ...
4
votes
1answer
46 views

Using 9 speed Deore front shifter with 10 speed Ultegra front Deraileur

I am trying to build a bike out of all the spare parts I have in my garage. I found a 3x9 Deore front shifter, 3x10 Ultegra front d and crankset. Would they work together? By the way, I am building a ...
2
votes
0answers
68 views

Road bike rentals in Europe [closed]

I'm going on a holiday to Southern France for road cycling within the Provence region and I'm wondering if I shell out on a bike box and take my own bike or just hire a road bike out there. Does ...
2
votes
3answers
2k views

How many lumens (lm) should a front light have?

I need a front bike light for pretty quick night riding on roads beside the town. I found one that has 120lm, 30lux, and 92m shining distance. Is it enough? What parameters should a good front light ...
2
votes
2answers
307 views

Road bike for brevets

Until today I've been doing 200km brevets on a trekking bike. It was quite comfortable, there was no ass pain after that, but the average speed was low (24km/h). Also if the wind blew, I had problems ...
3
votes
1answer
157 views

New trend of seat stay for road bike?

I have seen quiet a few road bike with a Z-shape seat stay until now, e.g. specialized Roubaix Does it serve any purpose? What's the advantage of this design in comparison to a straight-bar seat stay?...
0
votes
1answer
138 views

What features should I look for in a new wheelset?

I am building a custom bike and I can spend $500-$1200 on wheels. What are the best features on a set of road wheels? It would be nice if they were lightweight for climbing but I live on the flats ...
0
votes
3answers
257 views

does anyone still make competitive chromoly frames for road biking? [closed]

Chromoly frames can be constructed relatively light if the quality is high enough. Does anyone know of any brands that concentrate on making modern chromoly frames for entry level competitive cycling?...
-1
votes
3answers
417 views

Which is better for endurance riding - carbon or aluminum? Or does it really even matter? [closed]

New to this, and I'm on the fence which to buy. Will be training for long distance riding soon. I'm looking at buying Giant brand, but not sure which will be better - carbon or aluminum. Thx!
12
votes
3answers
3k views

How do people ride road bikes without fenders?

I want to buy a bike. The road bikes look very gorgeous. However I noticed that they come without fenders to protect from water! I was really surprised for that actually and that made me wonder about ...
0
votes
1answer
111 views

Riding Cannondale Synapse on Paris-Roubaix terrain?

I've test ridden the Synapse Sora 7 and love it! Going to buy it! But i've one concern. I'd like to know if I can ride my Synapse on the same terrain as seen along the Paris-Roubaix? I've seen the ...
3
votes
3answers
337 views

Road bike tires that are ok on sand

I've got an old Trek 1200 road bike circa 1995 with down tube shifters and mostly original components. These days, I mostly ride it on my summer vacation on Martha's Vineyard where most of the riding ...
0
votes
1answer
65 views

What is the spacing for trek 1.1?

I'm trying to find new wheels for my trek 1.1, and I can't find the spacing for the hubs. The wheels I'm looking at have a front spacing of 100mm, and a back spacing of 130mm. Will these fit on my ...
3
votes
1answer
187 views

What pressure should I run? Front versus the back wheel?

I assume it is common sense you should run a lower pressure in the front wheel versus the back. I weigh 175 lbs, I have tires with max 120 PSI, what PSI should I run in the front and the back tire on ...
3
votes
1answer
307 views

What is ideal for long distance road bike rides 23mm or 25mm tires?

I keep reading that the drop line for 25mm tires is greater. Obviously the 25mm tires have more volume. Do they have fewer pinch flats? Are they more comfortable, because they create less vibration? ...
1
vote
2answers
165 views

Motorising a bicycle.

Can anyone advise on the best way to motorise a bicycle apart from electric motors? I think I would like to fit a small two stroke engine.
6
votes
6answers
14k views

Shimano Claris vs 105?

I'm planning to get my first road bike as I have been putting a lot of miles into my hybrid. Did a century last sunday. Altogether I have done around 5k miles on my trek hybrid. So I thought getting a ...
1
vote
1answer
228 views

How much is a mass production aluminium frame worth? [closed]

There are several entry level bikes under $600. I actually own one, an excellent Felt F95. I was just curious, how much is a frame of such a bicycle worth? In total, what is the cost of a frame in a ...
0
votes
1answer
101 views

Chain skipping under increased pedal torque [duplicate]

I read the related post, but my situation is a bit different. Additional background - I installed new 105 shifters and derailleurs two years ago (~5000 miles) along with chain and cassette. I also ...
1
vote
2answers
937 views

What is wrong with my Shimano 105 5800 front derailleur?

Background: I've installed a complete new 105 group (this bike is a brand new custom build) on a Civia Hyland frame. The rear wheel has a white industries CLD disc hub for the 11 speed cassettes. ...
2
votes
1answer
121 views

which is better a sram 11 speed or shimano 10 speed FD with shimano 105 11speed groupset

I have bought an 11 speed shimano 105 groupset, unfortunately the 11 speed FD does not fit my bike (It is an Airnimal Chamelion). Therefore I have a choice of Sram 11 speed FD or Shimano 105 10speed ?...
0
votes
2answers
1k views

I am 182 cm tall. Is a road bike with a frame height 54cm good for me? [duplicate]

I have an option to buy a road bike that has the height of the frame 54 cm : https://www.willhaben.at/iad/kaufen-und-verkaufen/sport-sportgeraete/top-rennrad-ktm-strada-nur-9-3-kg-alles-shimano-...