Bikes designed for road use only. Could be any road-only bike, but typically means bikes optimized for speed / racing / club rides with drop handlebars, narrow tires and a crouched-forward rider position.

learn more… | top users | synonyms

4
votes
3answers
171 views

Best 9 speed cassette for fast & flat

I have a road bike with a 28/12 rear cassette. I cycle in Cambridgeshire on a daily basis and it's very flat. I find that I never use the hardest cog, leave the chainring on the biggest cog and ...
4
votes
3answers
85 views

Does 1.2cm of additional frame stack make a large difference to the ride of a bike?

I don't like the amount of handlebar drop on my current road bike. I am looking at a new bike that has an additional 1.2cm of frame stack (height). Would this 1.2cm make much difference in the ride of ...
4
votes
3answers
646 views

difference in aero bar design

I see that there are many types of aero bars, i.e., different designs. I am going to buy one but I am not sure which one is better. Here are two types of aero bar designs: Type1 Type2 The ...
4
votes
2answers
852 views

Is it worth converting a steel frame Trek Roadie to a Cyclocross?

I have a Trek Elance 330 from the 80s and love it! However, I find myself needing something that can handle fire roads (gravel jeep paths) and am wondering if it is worth the effort. Also, if it ...
4
votes
4answers
372 views

Building a road bike

I've seen a lot of answers here about building a fixie specifically, but I'm looking to build up a road bike. I currently have a Surly Pacer frame and fork, a Richie handlebar and stem, and that's ...
4
votes
3answers
775 views

Cyclocross racing with fixed gear road bike with cross tires

I would like to take part in three local cyclocross races in the coming weeks but have a bike dilemma: Should I convert my track frame to a new fork and put one cantilever brake on it and change the ...
4
votes
1answer
4k views

How do I stop my brake from sticking?

The rear brake (calliper) on my road bike sticks. When I pull the brake it pulls down but only half springs back and there's then slack in the leavers. This is causing rubbing on the rim. It's a ...
4
votes
1answer
2k views

How have you setup your tri-bars?

I'm getting some tri-bars for Christmas and I've been told by the bike shop how to set them up on the bike, but I'd like to get some tips from lots of different people. Up-close photos would be great. ...
4
votes
1answer
199 views

Derailleur guard on road bikes?

I live in an area with lots of debris, dodgy paving, and rain, and to make matters worse, I fall down sometimes (I know!). The main things that get damaged, of course, are the brake handles and the ...
4
votes
1answer
77 views

What are the original components to a 1953 Schwinn Paramount?

I have a 1953 Schwinn Paramount that I inherited and have been riding as my daily commuter. I think most everything is original, but am not sure. Where can I find out what the original components ...
4
votes
1answer
343 views

Fixing damage to brake rim surface

somehow the alloy braking surface of my rear wheel's rim has got a series of quite shallow lacerations, less than a mil' deep bunched quite closely together (the effected area is no more than 1/8 of ...
4
votes
1answer
106 views

What went wrong with my bottom bracket spindle length calculation?

Here's the facts: My bike frame requires a 70 mm Italian threaded bottom bracket I'm going to use a Nuvinci N360 IGH which requires a chainline of 49 (± 0.5) mm. I have Andel fluted cranks, which ...
3
votes
7answers
3k views

How much of a difference will I notice going from a Mountain bike to a road bike?

I have a Mountain bike with 1.95 tyres on it. Most of the cycle path I take into work is fairly well paved/asphalted, I'm not going over any dirt tracks or anything like that although there is the odd ...
3
votes
5answers
686 views

Why are roadies concerned about weight?

I have never ridden a road bicycle, so this question is probably silly (and a duplicate). Still: Assumptions: Road bike Riding fast, 30km/h nominal Few and gradual corners No abrupt stops (i.e. no ...
3
votes
6answers
14k views

Is a 51cm frame road bike the correct size for someone almost 6ft?

Looking for some advice on my first road bike. I've had my eye on a Carerra Virtuoso for about 6 months now, they haven't budged from £350, however I've just spotted one on ebay second hand. None of ...
3
votes
4answers
289 views

Is a custom road frame worthwhile?

I've been riding a Marin San Anselmo hybrid for some 13 years and I'd guess I've done over 7000 miles on it almost exclusively on the road (and it's not my commuting bike). I'm gradually doing more ...
3
votes
3answers
6k views

Most effective upgrades on Road bike

Earlier this year I purchased my first road bike (a 2013 - Felt F75). I had never really ridden before, so I didn't want to spend too much money up front not knowing how much I would actually ride. ...
3
votes
3answers
483 views

Muscle spasms while riding?

I've ridden 90 KM (and at reasonable speeds - 30+ KM/h) without issues, but rode my first Gran Fondo (140 KM) and experienced various spasms while riding. There were aid stations with food so I ate ...
3
votes
2answers
917 views

How do I evaluate the quality of a road bike?

I am specifically looking at a Fuji Finest Womans road bike - 51cm. I am not sure what year it is. The ad description says: Women's specific geometry, 51 cm Shimano Sora, Ritchey stem, ...
3
votes
3answers
3k views

What factors determine stem length ?

Recently I went to a local bike shop to get a bike fitting advice. After taking body measurements, I was given a frame size recommendation. According to that, seat tube size, top tube size and stem ...
3
votes
4answers
635 views

Trek Domane and undamped motion with Isospeed?

Being a car guy and autocrosser, I'm familiar with suspension systems and the necessity to find a balanced spring/shock combination to create the best possible compliance, ride quality and performance ...
3
votes
2answers
1k views

How do I descend faster on the straightaway?

I've heard a lot of advice about descending mountain roads involving cornering and braking. I want to know how to go faster when descending on the long straightaway. Is it worth pedaling at speeds ...
3
votes
4answers
1k views

Road bike that is gentle on body, but can go in some dirt

I found out that a racing type road bike is hard to shift as hurts the arthritis in my fingers. And even the frame is harder on the hips. I need something more gentle, but fast enough to keep up with ...
3
votes
6answers
3k views

How do I estimate how long it will take me to ride my commute?

How can a cyclist, new to commuting by bike and not all that experienced in riding, estimate how long a commute will take? I have been riding for 4 days to and from work. 156km over over 4 days. I'd ...
3
votes
2answers
150 views

Disassembly and Shipping of bike

I have a road bike lying around in a garage in California. I would like to use it here in Illinois. However, there's no one out there who can disassemble and pack the bike for me in California, ...
3
votes
4answers
2k views

Should I get a performance bike or an endurance bike for 180 km rides?

I want to do the 180 km of cycling in general, that is the 2nd leg of Ironman. I don't have a bicycle, as of now. I am planning to buy a road bike (not the one used for triathlon). People ask me to ...
3
votes
3answers
383 views

Wheel set consideration

Background: I'm overhauling/refurbishing my second road bike that I use mainly for training. It needs new wheels. I found a couple of nice used 2011 wheelsets that were spares for a women's bike team ...
3
votes
3answers
918 views

Back wheel skidding out

On my cycle to work this morning I noticed my back wheel was skidding out as I was going up a fairly steep hill. It did it enough that I thought I'd probably gotten a flat, however upon inspection it ...
3
votes
3answers
736 views

Sizing guide for road bikes vs mountain bikes

i usually take a 21 inch size in mountain bike, but I want to buy a road bike. I'm 6'2'' and have a 34 inch inner leg. How do the sizes translate from mountain bike to road bike? Thanks
3
votes
4answers
307 views

Suggestions on buying a road bike for the city

I'm looking to buy a bike with which to get around Atlanta. My budget is about $500. I've seen lots of suggestions for a fixie but those seem relatively difficult. I plan to ride about 5-10 miles ...
3
votes
6answers
932 views

Finding a road bike for 5'2'' girlfriend

Last year I bought myself a used (although almost never ridden) road bike from around 1985. I love the bike. It is reasonably light and I love the diamond geometry. My girlfriend wants to get a ...
3
votes
3answers
360 views

Need a well-fitted bike for urban commuting

I started cycling to work every day. The bike I'm currently using is a mountain bike with a tiny frame and has begun to hurt my back. So, I'm looking to purchase something new. I'll be cycling around ...
3
votes
3answers
222 views

Single pivot brake with handlebar levers (Resurrecting an old Colnago)

I have an old Colnago I want to resurrect, which after some Google-ing I have discovered is very similar to the bike here (but in blue): I want to replace the drop bar brakes with "standard" brakes ...
3
votes
2answers
133 views

Where can I ride Paris-Roubaix style cobbles in the UK?

Watching the Paris-Roubaix and the Ronde van Vlaanderen recently made me think I'd like to try out my road bike on similar-style cobbles, just for a laugh. Is there anywhere in the UK (I live in ...
3
votes
2answers
853 views

Questions to ask before buying a bike?

I have thought about few questions to ask to the shop keeper before buying a bike. But would like to know from you experts, a complete set of questions like warranty period? Number of free services ...
3
votes
1answer
117 views

Electronic bicycling ranking for the office cyclists?

in the office many of us cycle to work. We though it would be cool to have ranking of cyclists with different sorting (distance, avg. speed and such). We can track our trips with Android or iPhone ...
3
votes
4answers
716 views

What are the possible upgrades for a 40-year-old Bottecchia 10 Speed?

I have a 40 year old Bottecchia (entry level model) that I took for ride yesterday after letting it sit for 20 years. Just inflated the tires and oiled the chain and off I went. The tires and brake ...
3
votes
2answers
4k views

Road Shifters, Mountain Rear Derailleur?

I have a road/cyclocross/commuter frame that is currently spec'd with road components - all Shimano 105, with an Ultegra rear derailleur. The cassette (10 spd) tops out at 27 teeth, and the rear ...
3
votes
1answer
480 views

Will a road brake lever work with a v-brake?

I'm planning on changing my commuter handlebar to a drop handlebar. As the diameters are different, I need to know if the new brake lever will work with the existing v-brakes. (My intention is to ...
3
votes
1answer
3k views

What are the advantage of the different gear shifters

I have just buy for the first time a road bike (Boardman Team Carbon) after long years on hybrids bike and unfortunately due of a injury I didn't have much time to experience with it. The bike has a ...
3
votes
1answer
161 views

Handlebar stem : height vs length

I want to decrease the reach of my handlebars. Does it matter whether I increase the height or get a stem with a smaller length(extension?) on my bike? And is there any way to calculate the ...
3
votes
1answer
207 views

How do I remove a quill stem?

(I recently got an old Favorit road bike (made in Czechoslovakia) and started restoring it. In order to give the frame a new coat of paint, I need to strip it down from everything.) I'm stuck with the ...
3
votes
1answer
522 views

Campagnolo QS Front Derailleur/Shifter Compatability

I have older Campagnolo Chorus 10-speed shifters. They are marked 'Carbon BB System'. I am replacing my front derailleur and have a spare 10-speed Record QS front derailleur. QS stands for Quick ...
3
votes
1answer
266 views

How much does nipple choice affect wheel weight/stiffness?

Would I be a fool to replace the nipples on a Dura Ace 7900 C24 wheelset with a set of DT Swiss anodised alloy nipples, in the interest of aesthetics? I want the bike to look nice, but don't want to ...
3
votes
1answer
229 views

Is this a collectable bicycle?

I have purchased a new bicycle, it is a clasical one (downtube shifters etc). I want to use it for commuting. Some guys told me that it might be a collectable bike and maybe i should try and find a ...
3
votes
2answers
354 views

Loud free hub suddenly become quiet

I have a fulcrum racing 5 evo which has a loud free hub (like other campy) for about 5 years now. I like the loud noise when coasting because I don't need to put a bell on the bike. On my last ride, I ...
3
votes
1answer
2k views

Changing from Shimano Road Double Chainset to Triple Chainset?

Road bike setup at the moment is: Shimano Tiagra (9 Speed) Shifters / Front Derailleur / 52-39T Chainset / Short Cage Rear Derailleur / Casette 27-11T. Will I be able to do a straight swap and ...
3
votes
1answer
1k views

Shimano 105 early- to mid-1990s SLR groupset on eBay worth it for 70s SuperCycle rebuild?

Is the below groupset a good value for this frame? I picked up a vintage SuperCycle Medalist frame (I'm guessing 1970s) and am looking to make a comfortable but capable bike for commuting and ...
3
votes
2answers
1k views

Can a 10-speed mountain bike chain be used on a 10-speed road bike?

I would like to use a Shimano Deore XT Chain CN-HG94 on my road bike. Are there any differences between roadbike chains versus mountain bike chains that prohibit this? Sample Road Bike Chains: Dura ...
3
votes
1answer
184 views

Grand Tours - Total Ascent (By stage, particularly the giro)

I'm looking for information on stages of grand tours, particularly the upcoming Giro. I can find details of total distance by stage, and the amount of ascent on the key climbs of a stage, but I'm ...