Shimano brand bicycle components. (No need to use if Shimano is an incidental part of the question.)

learn more… | top users | synonyms

3
votes
1answer
107 views

New Brake Compatibility with Vintage Bike

I have a vintage Gitane Sprint from the early '80s which came with Weinmann 405s (single-pivot side pulls). I had been thinking about replacing the front brake anyway and then recently broke the quick ...
4
votes
1answer
85 views

Shimano Nexus 3 — what anti-rotation washer to use?

As I described in my previous question, I attempted a gradual conversion from a dérailleur to a Shimano Nexus 3 gear hub. I have installed the hub, keeping the dérailleur's pulley for now, with ...
2
votes
2answers
219 views

Is a Shimano Dura-Ace 7800 rear derailleur compatible with a Dura-Ace 7900 11-27 cassette?

Is the Shimano Dura-Ace 7900 10 speed cassette with a ratio of 11-27 cassette compatible with a dura-ace 7800 rear derailleur? Some people say its fine but more important to me is what Shimano says ...
2
votes
1answer
86 views

Can I swap out an Ultegra 6750 crankset with a 6700?

I want to have the ability to change chainsets depending on terrain. I currently have the compact Ultegra 6750 chainset and am after a 6700 53/39 for the flats and races etc. Are the axels the same ...
1
vote
1answer
288 views

Does the Shimano Tourney TX rear derailleur support an 8 speed cassette?

I would like to upgrade to 8 speed. Does the Shimano Tourney TX rear derailleur support an 8-speed cassette.
1
vote
0answers
90 views

General History of the V-Brakes/Direct Pull Brakes/Linear Pull Brakes [closed]

I am currently doing some research on the Direct Pull/ Linear Pull/ V brakes. I have so far found a lot of information on how to adjust and fix v brakes (i.e. Sheldon Brown) or even comparing the v ...
2
votes
1answer
189 views

Correct position of brake quick release on Ultegra 6800

I'd like to know wether the brake quick release lever on the Ultegra 6800 can be kept in any intermediate position between completely closed and completely opened when riding.
1
vote
1answer
129 views

Can I replace my Shimano outer chain ring with a SRAM?

I need to replace my outer chain ring. I am currently running a 50t, I'm pretty sure it's a 130 BCD. I am considering a SRAM Outer chain ring as a replacement. I assume as long as measurements are ...
7
votes
3answers
150 views

Switching from a dérailleur to a gear hub

I'm upgrading an old bike with a five speed dérailleur system which I'm trying to convert to use a three speed gearhub from Shimano. I have assembled the wheel, I know how to set up the gearhub ...
2
votes
1answer
83 views

Shimano SIS Rear derailleur fixing problem

I have the shimano sis rear derailleur which needs fixing. I took it off the wheel while I was fixing the puncture in the rear wheel. Now I am not able to fix it. It keeps coming off when I am ...
1
vote
1answer
61 views

Shimano XT with Campag Centaur crank?

I would like to use a Shimano XT group for my flat-bar disc-brake touring bike, but the XT crankset doesn't suit my touring needs very well. I would prefer having a 50/34 crank instead of the XT's ...
3
votes
2answers
73 views

What speed is my Shimano Nexus 8 Hub in?

I made a mistake when changing a flat. I didn't have it in 4th speed. When I was changing the flat I shifted it for more give on the shifter cable >_< . Now my shifter says 4 and I don't known what ...
1
vote
2answers
3k views

Tips for adjusting Shimano M355 hydraulic brakes

I have upgraded from cheap old front cable disks brakes and rear v-brakes to Shimano hydraulic M355's front and rear. I always adjusted my old brakes for a very tight fit (to reduce dead space between ...
1
vote
2answers
325 views

What is wrong with my Shimano 105 5800 front derailleur?

Background: I've installed a complete new 105 group (this bike is a brand new custom build) on a Civia Hyland frame. The rear wheel has a white industries CLD disc hub for the 11 speed cassettes. ...
2
votes
1answer
97 views

which is better a sram 11 speed or shimano 10 speed FD with shimano 105 11speed groupset

I have bought an 11 speed shimano 105 groupset, unfortunately the 11 speed FD does not fit my bike (It is an Airnimal Chamelion). Therefore I have a choice of Sram 11 speed FD or Shimano 105 10speed ...
2
votes
1answer
215 views

Shimano 105 5800 mech compatibilty with 5700 shifters

I have purchased a Shimano 105 5800 11 Speed Cassette 11-32, 116 link chain (CN- HG600-11) and longer-caged 'GS' rear derailleur (RD-5800-GS) to replace my original 105 10 speed 5700 series mech. Can ...
1
vote
1answer
2k views

Can I replace only the smallest cog on my rear cassette?

I currently have a 12-30t rear cassette which needs replacing. While I'm at it, I really want to switch to an 11 tooth to get the extra 9% in top speed. But the problem is, even the most expensive ...
4
votes
2answers
232 views

Add/remove sprockets on cassette to customize gear ratios

I have a Shimano 105 10-speed cassette on my road bike, with sprockets 11-12-13-14-15-17-...-28 (I don't know by heart what comes between 17 and 28). I'd like to remove the 11, and put a 16 between ...
3
votes
3answers
8k views

Alfine 11-speed - what is needed to install it? What are common problems when installing?

This is an expensive and heavy hub but I'm looking to build a new wheel and strip the rear derailleur off my old Trek MTB. It already has a fixed Ritchey carbon fork and front disc and is a nice ...
0
votes
1answer
1k views

How to fit BB bearings to install Ultegra Crank on road bike Wilier Cento 1

I've bought a used Wilier Cento 1 carbon road bike frame (not the new Cento1SR, but the previous model). Now I would like to transfer all Ultegra 6700 groupset components from my existing bike to it. ...
4
votes
3answers
8k views

Can you use a 8 speed Shimano shifter with a 7 speed cassette?

I want to use an 8-speed shifter with a 7-speed cassette. I saw this question, but I am unsure if this would work, since I believe the spacing is the same between a 7- and 8-speed, but the length is ...
2
votes
6answers
233 views

Can't downshift rear derailer

I'm trying to fix my wife's bicycle which sat out all winter. I can't get the rear derailer to downshift from the twist grip shifter. I have inspected and cleaned and lubricated the cables, nothing ...
2
votes
1answer
93 views

What is the purpose of greasing BB threads?

As is known for Shimano sealed bottom bracket cartages (e.g. page 16 here), if the BB cup is made out of metal, grease should be applied to the frame-cup thread. If the cup is plastic, grease should ...
3
votes
3answers
257 views

Remove front derailleur without breaking chain

I recently purchased a Diadora Orbita bike from SportChek. As I was riding it my front derailleur got bent and now I can't use my pedals. So, my question is, can I remove the Shimano FD-TY18 front ...
2
votes
2answers
62 views

Shimano Cassette Change

I have a Shimano compact double on my road bike with an 11-28 Cassette (50-34 Chainrings). I would like to change the cassette to 11-32. Is that possible and if it is are there other components I ...
2
votes
1answer
76 views

Shimano Pedals M520

I recently replaced an old pair of Tioga clipless pedals with a new pair of Shimano M520 pedals. Compared to my old pedals, the Shimano pedals have much more side to side play in them. Is there an ...
3
votes
1answer
81 views

crankset compatability

I am wondering if I would be able to run the 105 5800 crankset with my 9 speed ultegra 5600 shifters/rd? I don't have the funds to do the whole groupset at once, and I believe upgrading to 11 speed ...
0
votes
2answers
69 views

Bottom bracket creaking

I replaced my bottom bracket with a Shimano 113mm cartridge. Now 3 months later its making a creaking noise; the sound goes when free wheeling though. Do l need a new cartridge?
1
vote
3answers
2k views

Why are my Shimano R540 SPD SL Road Pedals incredibly stiff to clip out of?

I'm new to clip less riding. I just purchased and installed Shimano R540 SPD SL Road Pedals for my bike. I also got Shimano R064 SPD SL Road Shoes. I have been practising clipping in and out indoors ...
2
votes
2answers
3k views

Shimano PD-6800 vs PD-9000 pedals

Other than a 12g saving in weight and the Dura Ace label, are there any further potential reasons to prefer Shimano PD-9000 pedals over PD-6800? Edit: This question is specifically about pedals ...
1
vote
2answers
181 views

Which chainring? Shimano M785

So I've never changed a chainring before. But the first step is finding the right one. I have a Cube Hyde SL 2012 . It describes the crankset as Shimano Deore XT FC-M785 Hollowtech II 42x26T., ...
1
vote
1answer
183 views

Where can I get U.S. size 15B SPD clipless shoes?

I want to get some large clipless shoes for an indoor stationary cycle at my gym, which I presume uses SPD. I wear a U.S. size 15B and it is difficult to find shoes that long, let alone with a narrow ...
3
votes
1answer
188 views

Torque for Shimano Alfine 8/11 Speed Internally Geared Hub Axle Nuts?

I Googled for this, but couldn't find the proper torque (in Newton-meters) for Shimano Alfine 8- and 11-speed IGH axle nuts. I'm putting the hub back on the bike after removing the rear wheel. I'm no ...
0
votes
3answers
730 views

Can I change from short to long derailleur to increase cog size

I am have a tiagra 11-25 10 speed cassette with short cage. I am a poor climber and looking for extra gear; I would like to go 11-32 for this year until my climbing improves, will the short cage ...
1
vote
0answers
135 views

Shimano Nexus 7 speed IGH, high gears tight shift

I have the popular Shimano, Nexus 7 speed, internal gear hub. After removing the back wheel to replace the old tire, I've found that changing gears especially from 5 to 6 and 6 to 7 (especially the ...
3
votes
2answers
1k views

Attaching crank arm with Shimano SLX M660

Firstly, apologies if this question has tones of frustration, my new crank set and bottom bracket has never been installed correctly, so I am going to do it myself. Should the drive spline on the ...
4
votes
4answers
2k views

Why doesn't Shimano use shadow technology on road derailleurs?

Shimano has been using their 'Shadow' technology on their high-end mountain bike rear derailleurs (> Deore) for many years. In addition to the benefit described in the images below (from here), ...
2
votes
1answer
206 views

Upgrading from 50/34 to 50/39 with Shimano Sora?

I have a road-biased hybrid that came with a compact 110mm BCD 50/34 Shimano Sora crankset and chainrings. I'd like to upgrade the inner ring to 39, but I'm having some trouble figuring out what to ...
3
votes
1answer
436 views

Is the XTR Di2 battery compatible with Ultegra Di2?

I'm considering installing an Ultegra Di2 groupset on a small road bike. The space below the water bottle bosses is too little to install the regular road Di2 battery, but the XTR SM-BTC1 Di2 battery ...
0
votes
1answer
47 views

What Size Screw Holds the Up and Down Shifting Levers on Ultegra Shifter?

There's a screw on the back of my Ultegra (circa 2000) shifters that holds the down shifting (on the right side) inner lever, to the up shifting outer/longer lever. I've long struggled with it ...
1
vote
1answer
45 views

Pads in contact with disk when idle on my SLX L675 disk brakes

I've recently bought a Nishiki Hyper pro which features the hydraulic Shimano SLX L675 brake system. What I've found is that the pads on the back wheel breaks appear to be in constant light contact ...
0
votes
1answer
580 views

Shimano Alivio M4000 vs Altus M370 shifters

I'm planning to upgrade my shifters to Alivio M4000. My old shifters are Altus M370. My question is will this make a significant differrence on my shifting? I'm running Altus M310 FD with Alivio M4000 ...
1
vote
1answer
89 views

Upgrading Cube Aim 29 2013

I'm thinking about upgrading my bike Cube Aim 29 2013. Current configuration described here. The bike is completely ok for short rides, but for longer rides doesn't feel comfortable. So I'm going to ...
2
votes
1answer
195 views

Are my brakes too close to the rim?

I like having my front brakes very close to the rim (see image) as it makes it much easier to brake, especially when on the hoods or long descents. I recently swapped to Continental GP4000 25mm tires ...
2
votes
1answer
2k views

Shimano Nexus Inter-3 internal gear hub stuck in second gear?

The situation My Shimano Nexus Inter-3 internal gear hub is stuck in second gear (it's a 3-gear hub). When I take the external cable housing apart, I can move the pin that goes inside to change gears, ...
1
vote
1answer
152 views

Shimano sora shifter no longer shifts

On my commute yesterday, I noticed that my right shifter was no longer 'clicking' when shifting my rear derailleur up into a larger sprocket. It still shifted fine, but I noted that I should look into ...
2
votes
2answers
8k views

7 speed to 8 or 9 speed cassette change

this is my first time here and i am new in the bike sport. I have a mtb for a month now and i usually use it for road trips with some dirt intervals. It has a 7 speed shimano cassette (14-34) and on ...
3
votes
2answers
594 views

Shimano short cage rear derailleur capacity

Can an Ultegra or 105 short cage RD handle a 30T ?
0
votes
1answer
230 views

Can I convert from a 52/42/30 crankset to 50/39/30?

I need to update my 9 speed triple crankset at 52/42/30, and those combinations seem difficult to find when I'm also looking to upgrade. A more common teeth combination seems to be 50/39/30, but I'm ...
5
votes
1answer
1k views

Are Shimano Hollowtech II bottom bracket spacers unique?

I'm moving my Shimano Hollowtech II XT crankset and bottom bracket over from a bike with 73mm bottom bracket to a 68mm bike. The only problem is that I only have 1 spacer and now I need 3 bottom ...