Shimano brand bicycle components. (No need to use if Shimano is an incidental part of the question.)

learn more… | top users | synonyms

1
vote
1answer
1k views

Minimum mountain groupset hard enough to resist abuse

I'm looking to upgrade my mountain bike and I would like to get something better than I have, if justified. I've never ridden any groupset better than alivio/deore, which work ok for me and have ...
2
votes
1answer
159 views

Little bit of water under plastic cover on my shimano shifters

I've had my bike for a month or so and just gave it a clean. There is now a little bit of water trapped under the shimano shifters clear plastic covers. Is this a problem? Will it disperse eventually? ...
3
votes
1answer
2k views

Which pulley is which on my Shimano STX RC derailleur?

I disassembled my rear derailleur to clean it; when I removed the sprockets they basically looked the same; both jet black and caked with all sorts of black grease-like-stuff. I figured they were the ...
4
votes
3answers
5k views

Can I replace chainrings without replacing the rest of the drive train?

I now ride a 60cm SurlyLHT with chain rings at 26/36/48t. Can I replace with a smaller set at 22/32/46t (or similar combination) without having to replace the entire drive train - cassette, rear ...
4
votes
1answer
3k views

Upgrade Shimano Sora shifters to 105

I want to upgrade my 3x9 Sora shifters to 3x10 105s. However, looking at the Shimano Compatibility Chart, it appears to indicate that I'll have to replace my front and rear derailleurs in addition to ...
2
votes
2answers
4k views

7 speed to 8 or 9 speed cassette change

this is my first time here and i am new in the bike sport. I have a mtb for a month now and i usually use it for road trips with some dirt intervals. It has a 7 speed shimano cassette (14-34) and on ...
2
votes
3answers
6k views

Alfine 11-speed - what is needed to install it? What are common problems when installing?

This is an expensive and heavy hub but I'm looking to build a new wheel and strip the rear derailleur off my old Trek MTB. It already has a fixed Ritchey carbon fork and front disc and is a nice ...
2
votes
4answers
476 views

deore LH crank on 105 chainset

I have a 105 triple chainset (hollowtechII) and the left hand side has developed a crack. Now I can't find any replacement 105 LH cranks but there are some Deore ones on the ebays that aren't too ...
5
votes
2answers
3k views

Upgrade Shimano from 9- to 10- speed

I'm thinking of upgrading the 9-speed Tiagra rear mech on one of my (road) bikes to something, still Shimano, but 10-speed. The obvious replacements I'll need are cassette, right-shifter and chain. ...
2
votes
2answers
459 views

Spokes for Shimano Ultegra Wheelset

I had a minor run in with car early last month and my front wheel got trashed: LBS says between labor, paying for the proprietary spokes (you have to buy for front and back as well I guess), ...
1
vote
1answer
609 views

Shimano Nexus 3 clicking free-wheel-mechanism-like noise

I have assembled a bike with new Shimano Nexus 3 (SG-3C41) internally geared hub. In the lowest gear the hub is silent. However in the middle and highest gear it makes a clicking noise similar to ...
1
vote
2answers
245 views

Shimano shoe size

I am riding clipless with the MT43 shoes I bought at my LBS. They are great,... when it is not cold outside... and now it is cold outside... and my toes are freezing. I was thinking of getting Shimano ...
4
votes
2answers
352 views

CB Roubaix upgrade to Shimano Tiagra - brake problems

I installed the new Tiagra brakes (4600) to my Claud Butler bike following the accompanying instructions. I've also installed new Tiagra levers. There is not enough adjustment in the brakes to allow ...
3
votes
1answer
386 views

Is it Shimaro or Shimanno?

A friend told me the best bike parts are shimaro/shimanno? I saw both companies online! Which one is faking other ones name?!!
3
votes
1answer
1k views

Shimano chainring / crankset compatibility

I discovered a Shimano FC-2300 Crankset (175-mm 52/42/30T 8 Speed) for $62 on Amazon - is this compatible to replace my old FC 3301/3304? The longer story is I need to replace my Shimano chain ...
4
votes
1answer
365 views

Shimano Sora shifter having trouble in the snow

So today is the first day of snow here in Norway, and I had prepared well for this day. My Giant Cyclocross has new spiked tires and i've done a check on all components, they are ready for the ...
3
votes
1answer
310 views

Anyone know the pull ratios of Zee 10sp and XT 9sp Mechs?

I'm putting a bike together from a load of spares and I'm having difficulty getting a shifter and derailleer to play well. I think the problem is the Zee mech. Does anyone know the pitch/pull ratio in ...
3
votes
1answer
298 views

Can I use Shimano trigger shifter with my X3 SRam gears?

My bike has SRam X3 gears and a grip shifter. I'd like to change for a trigger shifter. In the bike shop where I bought it, they say that I can change for a Shimano shifter (they don't have SRam). ...
2
votes
1answer
182 views

Where is the Tricross Sora front derailleur barrel adjuster

It's supposed to be on the outer casing (according to the shimano manual) but the Tricross has internal cable routing. Anyone know where it is? I really don't see it but I might be being a bit ...
1
vote
3answers
3k views

Front Derailleur Not Working

I recently bought a new bike off of BikesDirect. http://www.bikesdirect.com/products/windsor/wellington2_IX.htm However, no matter what I do, I can't seem to get the front derailleur to do anything. ...
3
votes
4answers
852 views

Are frame changes needed to switch groupset from Shimano to Campagnolo?

I want change the groupset on my Scott Addict R2 from Shimano to Campagnolo. Is Campagnolo fully compatible or will I need to make frame changes?
0
votes
2answers
1k views

Adjust reach on Ultegra ST-6510 levers?

I'd like to adjust the reach (distance from the drop bars to the brake levers) on my Ultegra 6510 levers. The Shimano instructions don't mention the ability to adjust this at all, which seems odd to ...
2
votes
1answer
220 views

Has Shimano produced Ultegra 600 Hub Set, 32 hole?

I found this item at an online shop, but can not find infomation about this product. Anyone knows this hub set? and any review infomation available there?
1
vote
1answer
180 views

How can I use a small Shimano BB on any frame?

I have a Shimano BB-ES25 bottom bracket and 45T crankset that was removed from a Giant-CRX City with an eccentric hub (it had Shimano Alfine internal hub gears). They have literally never been used, ...
0
votes
1answer
479 views

Shimano Chainring Set

I have a Shimano Altus 8-speed on my hybrid/commuter bike. I have to put in a new cassette and a new chain as well and looking at the teeth of the largest chainring cog in the front, it looks like the ...
1
vote
1answer
305 views

New touring bike components

I'm buying a new touring bike. I need an opinion on some of the parts. Crankset: Shimano XT FC-M770 Cassette: Shimano XT CS-M770 Rear Derailleur: Shimano XT M772 SGS Front Derailleur: Shimano XT ...
4
votes
2answers
1k views

What chainrings are compatible with the Dura Ace 7900 crankset (apart from 7900 chainrings)?

I need to get a 52t chainring for my 7900 Dura Ace crankset but am not willing to spend 150 euro on a chainring. Would an Ultegra 52t 6700 chainring work on the 7900 Dura Ace crankset ?
1
vote
1answer
609 views

Can I use 10-speed Shimano STI shifters with a 9-speed drivetrain?

I need to replace Shimano 105 STI shifters on a 9-speed road bike which was damaged in an accident, however there are few places that still stock 9-speed Shimano 105 STI shifters. Can I use the ...
1
vote
1answer
187 views

Alternatives for front shifting for small hands

I'm looking into a hopefully short-term solution for my daughter's small hands for shifting the left/front. Current setup is Shimano Sora with triple on the front. She can shift the right side fine, ...
2
votes
2answers
841 views

Attaching crank arm with Shimano SLX M660

Firstly, apologies if this question has tones of frustration, my new crank set and bottom bracket has never been installed correctly, so I am going to do it myself. Should the drive spline on the ...
3
votes
6answers
2k views

How do I make the platform side of a Shimano PD-A530 multi-purpose SPD pedal less “slippery”?

The lock side is great, however, shoes does not stay on the platform side. Your leg always slip out from the pedals during pedaling. Any solution to improve it?
1
vote
1answer
838 views

Mixing 9-speed Tiagra and 9-speed Deore XT

I currently have a road bike with the following setup for the gears: 9-speed Tiagra front and rear derailleurs, Sora shifters, all from 2009: 30/39/52 Crankset 11-25 Cassette. I need some more low ...
2
votes
2answers
4k views

What shifters are compatible with shimano 9-speed?

I haven't ridden in anger since around 2003. I have two bikes which I am trying to return to a roadworthy state. Each has a non-functioning right hand shimano shifter. Racing bike: Ultegra 6500 ...
4
votes
1answer
4k views

Mixing components: 105 and Deore XT

When I bought my bike back in 1999, it was mounted on Shimano 105 except for rear derailleur and cassette which are Deore XT (all 9-speed, Hyperglide). The vendor then told me "..and you've got a ...
0
votes
4answers
1k views

“Clacking” noise coming from drivetrain

I have a 2005 Specialized S-Works Tarmac with Dura-Ace components and Mavic Ksyrium SL wheelset. I get a "clacking" noise coming from the drivetrain area only when pedaling forward. I say ...
3
votes
1answer
1k views

I just got a western flyer bike… want some background information?

I went to the Salvation Army today to find an old Western Flyer bike for $20. Being the college student I am, I couldn't resist such a deal. So far my roommate and I are getting it fixed up and it's ...
4
votes
1answer
2k views

Changing from Shimano Road Double Chainset to Triple Chainset?

Road bike setup at the moment is: Shimano Tiagra (9 Speed) Shifters / Front Derailleur / 52-39T Chainset / Short Cage Rear Derailleur / Casette 27-11T. Will I be able to do a straight swap and ...
15
votes
6answers
13k views

Does this chainring need to be replaced?

Here is a closeup of my triple: All three rings are Shimano Ultegra and have never been changed. They probably have at least 12000+ km on them. I've been pretty good about changing the chain ...
1
vote
2answers
2k views

How to replace broken chainring that is missing a tooth

I was going to ask if I need to replace it but I'm certain the responsible answer is yes (comments welcome). How do I find and replace the outer chainring? Specifically find the right model or ...
0
votes
1answer
922 views

Change my Shimano SIS rear derailleur of 7 speeds to a better one?

I recently broke my rear derailleur of my road bike it was a Shimano SIS 7 speeds, so I am thinking if I can get a better one like a sram or deore or I don't know. Thank you for your help.
1
vote
1answer
764 views

New shifters: is Acera SL-M360 a good buy and how much better is SL-M310?

I was going to buy the Shimano Acera SL-M360 (but now the shop only has the SL-M310 ones), so I wanted to double check if it's what I'm actually looking for. I just want them to last long and do their ...
2
votes
1answer
3k views

Which derailleur should I use with a Shimano 7 speed freewheel 14-34T megarange?

Which derailleur should I use with a Shimano 7 speed freewheel 14-34T megarange in order to prevent the derailleur from rubbing the cassette in 2nd.
3
votes
2answers
313 views

Can i use v brakes on racing bike rims?

i fitted a set of cheap "thin" (racing bike size) rims with 32 mm tyres. the fork allows even bigger tyres to be mounted. is it a problem if i fit the bike with Deore LX v-brakes ? will it brake ...
4
votes
2answers
6k views

Can I use a 9sp chainring set on my MTB which has a 8 speed Shimano CS-HG70 Cassette

Just installed the CS-HG70 cassette and while doing some tuning, noticed that my chainring is no longer true, especially around the crank so am thinking about replacing the chainring set but can not ...
3
votes
1answer
2k views

How do I clean the inside of a freehub?

I didn't know any better and I let degreaser drip into the freewheel body of my Shimano FH-RM65. Now it makes a terrible retching noise when it rotates. How do I clean the inside of this thing? ...
3
votes
2answers
4k views

Can you use a 8 speed Shimano shifter with a 7 speed cassette?

Want to use a 8 speed shifter on a 7 speed cassette. I saw this question, but I am unsure if this would work, since I believe the spacing is the same between a 7 and 8 speed, the length is just not.
3
votes
1answer
691 views

What does double and triple gear shifters mean?

I am looking at these components and am wondering what does double and triple gear shifting mean? Shimano R221 Double Gear Shifters 8 Speed ...
5
votes
1answer
3k views

Replace Ultegra 6600 STI lever

I need to replace my Ultegra 6600 right hand shifter as the ratcheting system is gone. The rest of the groupset is all the same 6600 series. I am having a hard time sourcing just a right hand side ...
4
votes
2answers
292 views

Bargain-basement component brand lines?

So it now seems obvious to me that brand name alone is not a good quality heuristic; my Shimano Revo shifter just went south and was replaced after two years, which seems far too soon. (LBS put a SRAM ...
0
votes
1answer
643 views

How is the quality of carbon wheelset from taiwan?

Recently I read from some websites, it sells taiwanese carbon wheelset, How is the quality of the carbon rim, spokes and hub from those wheelset made in taiwan ? I didn't see any brand name, so it's ...