Shimano brand bicycle components. (No need to use if Shimano is an incidental part of the question.)

learn more… | top users | synonyms

3
votes
1answer
280 views

Can I use Shimano trigger shifter with my X3 SRam gears?

My bike has SRam X3 gears and a grip shifter. I'd like to change for a trigger shifter. In the bike shop where I bought it, they say that I can change for a Shimano shifter (they don't have SRam). ...
1
vote
3answers
2k views

Front Derailleur Not Working

I recently bought a new bike off of BikesDirect. http://www.bikesdirect.com/products/windsor/wellington2_IX.htm However, no matter what I do, I can't seem to get the front derailleur to do anything. ...
2
votes
1answer
206 views

Has Shimano produced Ultegra 600 Hub Set, 32 hole?

I found this item at an online shop, but can not find infomation about this product. Anyone knows this hub set? and any review infomation available there?
3
votes
4answers
773 views

Are frame changes needed to switch groupset from Shimano to Campagnolo?

I want change the groupset on my Scott Addict R2 from Shimano to Campagnolo. Is Campagnolo fully compatible or will I need to make frame changes?
5
votes
2answers
3k views

Upgrade Shimano from 9- to 10- speed

I'm thinking of upgrading the 9-speed Tiagra rear mech on one of my (road) bikes to something, still Shimano, but 10-speed. The obvious replacements I'll need are cassette, right-shifter and chain. ...
1
vote
1answer
177 views

How can I use a small Shimano BB on any frame?

I have a Shimano BB-ES25 bottom bracket and 45T crankset that was removed from a Giant-CRX City with an eccentric hub (it had Shimano Alfine internal hub gears). They have literally never been used, ...
0
votes
1answer
441 views

Shimano Chainring Set

I have a Shimano Altus 8-speed on my hybrid/commuter bike. I have to put in a new cassette and a new chain as well and looking at the teeth of the largest chainring cog in the front, it looks like the ...
1
vote
1answer
297 views

New touring bike components

I'm buying a new touring bike. I need an opinion on some of the parts. Crankset: Shimano XT FC-M770 Cassette: Shimano XT CS-M770 Rear Derailleur: Shimano XT M772 SGS Front Derailleur: Shimano XT ...
1
vote
1answer
592 views

Can I use 10-speed Shimano STI shifters with a 9-speed drivetrain?

I need to replace Shimano 105 STI shifters on a 9-speed road bike which was damaged in an accident, however there are few places that still stock 9-speed Shimano 105 STI shifters. Can I use the ...
4
votes
2answers
1k views

What chainrings are compatible with the Dura Ace 7900 crankset (apart from 7900 chainrings)?

I need to get a 52t chainring for my 7900 Dura Ace crankset but am not willing to spend 150 euro on a chainring. Would an Ultegra 52t 6700 chainring work on the 7900 Dura Ace crankset ?
4
votes
1answer
356 views

Shimano Sora shifter having trouble in the snow

So today is the first day of snow here in Norway, and I had prepared well for this day. My Giant Cyclocross has new spiked tires and i've done a check on all components, they are ready for the ...
1
vote
1answer
178 views

Alternatives for front shifting for small hands

I'm looking into a hopefully short-term solution for my daughter's small hands for shifting the left/front. Current setup is Shimano Sora with triple on the front. She can shift the right side fine, ...
1
vote
1answer
771 views

Mixing 9-speed Tiagra and 9-speed Deore XT

I currently have a road bike with the following setup for the gears: 9-speed Tiagra front and rear derailleurs, Sora shifters, all from 2009: 30/39/52 Crankset 11-25 Cassette. I need some more low ...
2
votes
2answers
804 views

Attaching crank arm with Shimano SLX M660

Firstly, apologies if this question has tones of frustration, my new crank set and bottom bracket has never been installed correctly, so I am going to do it myself. Should the drive spline on the ...
4
votes
1answer
4k views

Mixing components: 105 and Deore XT

When I bought my bike back in 1999, it was mounted on Shimano 105 except for rear derailleur and cassette which are Deore XT (all 9-speed, Hyperglide). The vendor then told me "..and you've got a ...
2
votes
2answers
4k views

What shifters are compatible with shimano 9-speed?

I haven't ridden in anger since around 2003. I have two bikes which I am trying to return to a roadworthy state. Each has a non-functioning right hand shimano shifter. Racing bike: Ultegra 6500 ...
0
votes
4answers
1k views

“Clacking” noise coming from drivetrain

I have a 2005 Specialized S-Works Tarmac with Dura-Ace components and Mavic Ksyrium SL wheelset. I get a "clacking" noise coming from the drivetrain area only when pedaling forward. I say ...
3
votes
1answer
3k views

Can Shimano Tiagra 9 speed levers (ST-4500) be used with 105 brakes (BR-5700)?

I want to replace the non-Shimano rear brake that came with my bike with either Shimano 105 (BR-5700) or Tiagra (BR-4600) brakes, preferably the 105 model. The Shimano compatiblity chart says the 10 ...
0
votes
1answer
837 views

Change my Shimano SIS rear derailleur of 7 speeds to a better one?

I recently broke my rear derailleur of my road bike it was a Shimano SIS 7 speeds, so I am thinking if I can get a better one like a sram or deore or I don't know. Thank you for your help.
1
vote
2answers
2k views

How to replace broken chainring that is missing a tooth

I was going to ask if I need to replace it but I'm certain the responsible answer is yes (comments welcome). How do I find and replace the outer chainring? Specifically find the right model or ...
1
vote
1answer
730 views

New shifters: is Acera SL-M360 a good buy and how much better is SL-M310?

I was going to buy the Shimano Acera SL-M360 (but now the shop only has the SL-M310 ones), so I wanted to double check if it's what I'm actually looking for. I just want them to last long and do their ...
2
votes
1answer
3k views

Which derailleur should I use with a Shimano 7 speed freewheel 14-34T megarange?

Which derailleur should I use with a Shimano 7 speed freewheel 14-34T megarange in order to prevent the derailleur from rubbing the cassette in 2nd.
3
votes
2answers
305 views

Can i use v brakes on racing bike rims?

i fitted a set of cheap "thin" (racing bike size) rims with 32 mm tyres. the fork allows even bigger tyres to be mounted. is it a problem if i fit the bike with Deore LX v-brakes ? will it brake ...
4
votes
2answers
5k views

Can I use a 9sp chainring set on my MTB which has a 8 speed Shimano CS-HG70 Cassette

Just installed the CS-HG70 cassette and while doing some tuning, noticed that my chainring is no longer true, especially around the crank so am thinking about replacing the chainring set but can not ...
3
votes
1answer
2k views

How do I clean the inside of a freehub?

I didn't know any better and I let degreaser drip into the freewheel body of my Shimano FH-RM65. Now it makes a terrible retching noise when it rotates. How do I clean the inside of this thing? ...
3
votes
2answers
4k views

Can you use a 8 speed Shimano shifter with a 7 speed cassette?

Want to use a 8 speed shifter on a 7 speed cassette. I saw this question, but I am unsure if this would work, since I believe the spacing is the same between a 7 and 8 speed, the length is just not.
3
votes
1answer
650 views

What does double and triple gear shifters mean?

I am looking at these components and am wondering what does double and triple gear shifting mean? Shimano R221 Double Gear Shifters 8 Speed ...
5
votes
1answer
2k views

Replace Ultegra 6600 STI lever

I need to replace my Ultegra 6600 right hand shifter as the ratcheting system is gone. The rest of the groupset is all the same 6600 series. I am having a hard time sourcing just a right hand side ...
4
votes
2answers
284 views

Bargain-basement component brand lines?

So it now seems obvious to me that brand name alone is not a good quality heuristic; my Shimano Revo shifter just went south and was replaced after two years, which seems far too soon. (LBS put a SRAM ...
2
votes
1answer
471 views

Using non-Shimano link with Shimano chain?

I know the official answer from Shimano is you can only use their quick link, but practically is it okay to use SRAM or KMC links? Specifically, I have the Shimano HG-40 chain.
0
votes
1answer
626 views

How is the quality of carbon wheelset from taiwan?

Recently I read from some websites, it sells taiwanese carbon wheelset, How is the quality of the carbon rim, spokes and hub from those wheelset made in taiwan ? I didn't see any brand name, so it's ...
3
votes
3answers
7k views

What tool is needed to remove a Shimano HG-50 freewheel?

What tool is needed to remove a Shimano HG-50 freewheel from the wheel hub? It looks like a 12mm or 13mm Allen key. Will this do it or is there some detail I have missed?
4
votes
1answer
2k views

Changing from Shimano Road Double Chainset to Triple Chainset?

Road bike setup at the moment is: Shimano Tiagra (9 Speed) Shifters / Front Derailleur / 52-39T Chainset / Short Cage Rear Derailleur / Casette 27-11T. Will I be able to do a straight swap and ...
2
votes
2answers
1k views

What's the cone wrench size?

What's the cone spanner size for cone nut on Shimano WH-R550 Front wheel ? Is it 17mm or 18mm ? I tried with 16, it seems, need more, 1 or 2mm bigger. Thanks
1
vote
1answer
140 views

How is the quality of alloy sprocket 10 speed sprocket?

I saw at ebay, 10 speed cassette compatible with shimano, it's very light 103 grams, but the material is alloy with ceramic coated, it says, the cassette can be used up to 3000K, is it true? or may be ...
1
vote
3answers
1k views

Ultegra 9-speed brifter upshift problem - beyond WD-40?

I have a 2000 Ultegra 9-speed right/rear brifter that does not "release" the cable properly. My initial search on this problem suggested that this could often be cured by flushing with WD-40. So ...
1
vote
1answer
157 views

Cassete spacer for CS 7800 and WH 7900

Should I use spacer on CS-7800 who is being installed on WH-7900 ? Or just install the cassete without 0.5mm spacer ? Cheers and thank you..
2
votes
1answer
244 views

FSA GOSSAMER ROAD CRANKSET with BB7800?

Can FSA GOSSAMER ROAD CRANKSET be used together with BB7800 Dura Ace from Shimano ? Thanks
3
votes
2answers
4k views

Options for replacing a 7 speed Shimano cassette / chain

I would like to replace my 7 speed HG70 cassette and chain. My problem is that it is increasingly difficult to find quality parts for 7 speed system. My bike is a Trek 970 from 1993, originally with ...
3
votes
2answers
5k views

How do the adjustment barrels on a gear cable work?

I have a Shimano Sora derailleur on the bike I just bought with a triple chainring in the front. Right up by the shifters there is a sort of barrel adjuster on the cable. It doesn't seem to do ...
0
votes
1answer
385 views

Is SRAM Apex crankset compatible with 6 speed chain and rear cassette

My bike's parts are in need of change and I wanted to do this in stages. Currently it has shimano parts based on a triple mountian bike front crank and derailleur and six speed rear cassette and ...
2
votes
1answer
949 views

Are Ultegra brifters compatible with 10-speed XT Dyna-Sys derailleurs? [duplicate]

Possible Duplicate: Road Shifters, Mountain Rear Derailleur? I'm looking to build a hardtail mountain bike with drop bars for commuting, touring and some occasional light off-road ...
5
votes
1answer
2k views

What do the numbers of shimano components mean?

Shimano components have numbers, presumably to denote quality. E.g. Dura Ace stuff has numbers like 7700, 7800, or 7900. An Ultegra might have 6700 or 6800 on it. A 105 might have the number 5600 or ...
0
votes
3answers
790 views

Do 8 Speed Shimano Gears Actually Work Properly?

I recently refurbished a 24 speed MTB with new cables, new chain and a proper clean. No matter how much I tried I could not get the shifting to be as smooth as a 9 speed system. It had a certain ...
1
vote
1answer
255 views

Are faceplates for different shimano brifters compatible?

I got a used brifter and the faceplate fell off. I am pretty sure it was a 105. It works well enough but it looks shitty. Does anyone know if I can just order whichever shimano brifter faceplate, and ...
3
votes
1answer
1k views

I just got a western flyer bike… want some background information?

I went to the Salvation Army today to find an old Western Flyer bike for $20. Being the college student I am, I couldn't resist such a deal. So far my roommate and I are getting it fixed up and it's ...
0
votes
2answers
315 views

Fuji Thrill shimano gears

I just bought my daughter a mountain bike (at a garage sale) a Fuji Thrill with Shimano gears. Anyway we need to replace the right hand shift/brake combo lever(the little spring is shot and won't ...
3
votes
1answer
384 views

Is it Shimaro or Shimanno?

A friend told me the best bike parts are shimaro/shimanno? I saw both companies online! Which one is faking other ones name?!!
0
votes
2answers
1k views

Adjust reach on Ultegra ST-6510 levers?

I'd like to adjust the reach (distance from the drop bars to the brake levers) on my Ultegra 6510 levers. The Shimano instructions don't mention the ability to adjust this at all, which seems odd to ...
1
vote
2answers
869 views

Is it possible to reverse cable direction in Shimano M770 shifter?

I tried to set up the perfect shifter + derailleur. For the last part it is better (for me) to have low-normal version, because reducing gears is essential for me (I bike mostly within city). So I ...