2
votes
1answer
85 views

Fixed gear conversion - hub spacers

I am converting my 80s steel peugeot to a fixed gear. I have purchased most of the parts an had a wheel built onto a SS hub. Now, SS hubs are narrower than road hubs - 120mm vs 130mm (although I ...
6
votes
2answers
511 views

Can one replace double chainrings with a singlespeed chainring on the original crankset/spider?

I have an 80's Peugeot steel-framed racer that I want to convert to singlespeed/fixed. It has a standard square-taper BB with a double chainring chainset. I can see the chainrings are removable from ...
2
votes
2answers
590 views

Planning on building a fixed-gear/single-speed from an old Schwinn World. What new parts will I need?

I think I want a flip flop hub, to keep my options open. If I get one off amazon, do I need to buy a freewheel and fixed-gear cog as well, or will those come with the hub? Also, does the hub have to ...
2
votes
2answers
142 views

Is it ok to use fixed gear threads for a freewheel?

I have a fixed/fixed flip-flop hub and the lockring threads are stripped out on one side. Would I be ok to just thread a single-speed freewheel on that side and use it as a fixed/free hub?
5
votes
2answers
2k views

Fixed gear: slipping

I have a single speed bike with a flip-flop hub and recently I decided to try out the fixed side. When testing it out in the car-park I was applying backpressure to brake and found sometimes the ...
5
votes
3answers
6k views

How do I change my single-speed to a fixed gear?

I've been biking on single-speed for a few months and would like to play around with a fixed gear. I've heard of a flip-flop hub, but I'm not sure exactly what it is. And without any fellow bikers - ...
1
vote
3answers
310 views

Skid on small frame

I bought a new, cheap and maybe nasty fixed gear bike. They were only in sizes 54cm and 56cm, so I had to go for 56cm, even though my road bike is 61cm and I'm 186cm. My first few skidding attempts ...
4
votes
2answers
672 views

Are there tugnuts made to fit forward facing horizontal dropouts?

Are there tugnuts meant to fit forward facing horizontal dropouts such as those on a Surly Cross Check, All City Space Horse, or Salsa Cassaroll which won't block rack and fender bosses and keep wheel ...
6
votes
3answers
1k views

Single speed chainline

I have just finished my first fixed gear based on an old Raleigh Rapide frame. But the chain line is off and I hear a crackling/ticking noise when I pedal. The wheels are replace with a gipiemme ...
2
votes
3answers
442 views

My LBS does not carry fixed-gear/single-speed parts. What next?

Question Changed. See Below for Original. My local bike shop neither carries fixed-gear/single-speed parts nor is very knowledgable about the topic. Should I find an online storefront to take its ...
1
vote
3answers
2k views

What kind of handlebar should go on a fixie to sell it?

I've seen fixies with mtb handlebars, sawed-off mtb handlebars, drop bars, and bullhorns. The fixie I built has drop bars, but I'm wondering if I should change that if I want to sell it.
4
votes
6answers
4k views

Fixie/Single speed frame information for beginner

I don't want to buy a ready made bike because singlespeed or fixed gear bikes are way expensive due to their popularity. I want to make my own bike, I haven't build a bike from scratch before. I want ...
14
votes
3answers
11k views

What is the difference between a “single-speed bike” and a “fixed-gear” bike?

I would have thought that a single gear was the same as a fixed gear, but that does not seem the case. What am I missing? Can a fixed gear bike have more then one gear?
4
votes
3answers
4k views

Fixed-gear vs single-speed for clipless pedals

I currently ride a single-speed bike with a flip-flop hub, both for my daily commute and for pleasure/exercise a couple nights a week. I've decided to pick up my first set of clipless pedals and ...