Questions that specifically deal with SRAM components. (No need to use if SRAM is an incidental part of the question.)

learn more… | top users | synonyms

9
votes
1answer
5k views

How to mount SRAM snaplock?

I am trying to join PC-1 SRAM chain, it has such snaplock: And the problem is, the distance between holes is slightly less (IMHO) than distance between the pins. Every hole on its own fits any pin, ...
3
votes
1answer
83 views

SRAM Guide brake lever won't return

I have an SRAM Guide brake (rear) that after bleeding, the brake lever won't return quickly. At room temperature, this is barely noticeable, but when the temperature climbs, or the bike is in the ...
1
vote
1answer
44 views

Crank Compatibility for my Orbea Hydro 2012

I have received as a gift a set of SRAM bb30 cranks. I would like to know if they fit my 1012 Orbea Hydro and if can I use SRAM Alloy GXP Bottom Bracket to fit it all together.
1
vote
1answer
118 views

Need Hidden nut for SRAM Force 1 chainring

I purchased a 50t Force 1 x-sync chainring. The SRAM install instructions say to place the hidden nut (thin item that has "teeth" on the outside that becomes "permanent" in the chainring once ...
1
vote
4answers
445 views

SRAM Force 22 chainset in an otherwise 10-speed SRAM setup

I notice that SRAM web site still lists "regular" 10-speed Force chainset as one of their products. However, my attempts to find it for sale online came up with almost nothing. It seems to be "barely" ...
1
vote
1answer
43 views

I'd like to upgrade my SRAM cassette, but confused by options

I have this bike: http://www.cxmagazine.com/blue-bicycles-norcross-al-cyclocross-bike-review, with a 48/34 chainring and 11-26t cassette. I'd like to add some lower gearing. SRAM offers at 11-32 ...
4
votes
2answers
6k views

How to properly clean and lube the bearings on a sram apex bottom bracket (GXP)?

For this bottom bracket type I am not sure you can take the bearings out to lube them. How do I get grease in there. Also how do I get the old grease out? Does it even matter? I found this video ...
1
vote
3answers
181 views

SRAM compatible 11 speed 12-25 cassette?

I'm looking for an 11 speed 12-25 cassette compatible with a SRAM drivetrain, however I don't think SRAM makes one. They list specs for their 11 speed cassettes as follows: 11-25: ...
2
votes
2answers
143 views

Chain falls off all the time when I want to shift from small to big front ring

90% of the time when I shift from the small front ring to the big one the chain falls off to the pedal. Why is this happening? This is a dual click, SRAM Rival. Shifting on a back wheels perfect, no ...
6
votes
2answers
492 views

What is “crank preload”

I'm in the middle of swapping my BB30 cranks from stock FSA Gossamer to a (shorter length) SRAM BB30 "IA" S950. The S950 has a "crank preload" adjuster on the NDS which the spindle is also attached ...
1
vote
1answer
105 views

How do I increase braking power and “touchiness” of Sram Guide RS Brakes?

I've got some Sram Guide RS disk brakes and they're very weak and not touchy at all. I prefer touchy brakes. I know the Guide RSC has the tool free contact adjustment to make them touchier. I have ...
1
vote
1answer
69 views

24 gear SRAM shifters- PROBLEM

So recently i bought a carrera vengeance for £45 which is a bargain and the only problem was the gears(24 gear SRAM shifters) for the left side. When i got it i tried to shift but it just clicks and ...
2
votes
1answer
610 views

Why does the chain misalign in the lower pulley when shifting to the small front cog?

Almost every time I go from the big, to the small, front cog on my SRAM Red 2011 (with a KMC chain), the chain ends in the lower pulley position, as shown in the photo. Why?
0
votes
1answer
85 views

which power meters will work with a sram cx1 group set and a bb90 bottom bracket?

I am thinking about getting a new bike but would like to keep using a power meter but can seem to figure out which ones are compatible with sram cx1 and x1 groupsets. Its for my cyclocross bike so ...
2
votes
1answer
161 views

Can I use a SRAM X0 Crank with Shimano XT chain rings?

I have a SRAM X0 crank on my MTB, and I want to buy some Shimano XT chain rings from a mate. Will they fit? Or is the BCD, Spider shapre, bolt size etc incompatible. All are 10 speed.
5
votes
1answer
1k views

BB92 (Shimano bottom bracket) with SRAM 30mm crankshaft (X01 or XX1 BB30)?

The frame that I want to build has BB92 bottom bracket hole. The drivetrain I want to use is 1x11 SRAM XX1 or X01 with 30mm crankshaft (BB30)(edit: also available GXP). There are ways to fit it - ...
2
votes
1answer
404 views

Which rear mech to replace sram X-9 10 speed 2x10

I have a Whyte 905 2011 with a 12-36 Sram cassette and an X-9 medium cage rear derailleur. It's not been attenuating well for some time despite efforts to adjust. The bike shop couldn't fix it. So i'm ...
2
votes
2answers
130 views

Can you change the rear hub on a tubular cyclo cross wheelset with out riping the tubular tyre off?

I recently bought sram cx1 for my cyclocross bike and was hoping it to put it on tonight. I didn't do enough research before purchasing the product to realise that 11 speed cassettes will not fit ...
-1
votes
2answers
989 views

Can I mix a SRAM Crankset with everything else Shimano? (Derailleurs, Cassette etc) [closed]

I was wondering if I could swap a Shimano crankset with a SRAM crankset without any problems I also know about different BBs like Octalink and chainring size differences
1
vote
1answer
198 views

Can I replace my Shimano outer chain ring with a SRAM?

I need to replace my outer chain ring. I am currently running a 50t, I'm pretty sure it's a 130 BCD. I am considering a SRAM Outer chain ring as a replacement. I assume as long as measurements are ...
0
votes
0answers
57 views

Purefix Kieren Pro

TL;DR FRAME: Kieren Pro (68mm BB) Which BB is suitable for this frame? (want to use SRAM s100 crank) If BB must be Truativ 108 or 113mm, how do adjust chainline? Thanks for your time and efforts ...
0
votes
1answer
63 views

Hard shifting on SRAM Rival FD shifter

I just installed SRAM Rival shifters and a FD on my touring bike. However, I'm having an issue with very hard shifting. The right/rear shifts fine (teamed with X7 RD). I have to push excessively hard ...
2
votes
1answer
119 views

which is better a sram 11 speed or shimano 10 speed FD with shimano 105 11speed groupset

I have bought an 11 speed shimano 105 groupset, unfortunately the 11 speed FD does not fit my bike (It is an Airnimal Chamelion). Therefore I have a choice of Sram 11 speed FD or Shimano 105 10speed ...
0
votes
2answers
324 views

What size is the tiny ball bearing used in SRAM brake caliper quick release detents?

SRAM road brake calipers (mine are specifically Rival from 2011) have a quick release lever to facilitate wheel changes, as many calipers do. The SRAM QR lever has detents which make a little "click ...
1
vote
1answer
161 views

SRAM Cassette on Campy Wheels

I wrecked my current wheel set in a crash and am considering purchasing a set of Campy Hyperons from a friend. AFAIK the wheels are stock and haven't been tweaked in any way. I would like to know if ...
1
vote
1answer
186 views

Upgrading a heavy duty bike

I have been using my bike for about 10 years for daily commuting and occasional traveling. It is a "trekking cycle" with a flat handle bars. I use it mostly for road riding, i.e. on streets and paved ...
5
votes
5answers
3k views

Gear indicator on SRAM X5 Shifter shows wrong gear

I have SRAM X5 Shifters like this one: The indicator is now showing the gear above the one I'm actually in, so if like the picture it shows a 2 I would actually be in 1 (the smallest chainring), a ...
0
votes
1answer
458 views

SRAM Rival brake caliper screws/bolts are rusty, how to replace?

I have a full SRAM Rival groupset from 2011. Having used it in humid and rainy places for a while, most of the parts are OK, but the small button-head screws (or bolts?) in the QR pivot for the brake ...
0
votes
1answer
232 views

Incorrect number of clicks on SRAM MRX gear shifter

I purchased a bike with a "7 gear" SRAM MRX 200-70 gear shifter. However, the SRAM gear shifter only clicks 6 time (corresponding to 6 gear changes). Is the SRAM gear shifter faulty, and in need of ...
2
votes
2answers
354 views

What does “SRAM Custom” (front derailleur) mean?

I'm going through specification of Specialized Epic Comp bicycle (link) and there is in column FRONT DERAILLEUR: "Custom SRAM, 2X10, high direct mount". What does it mean? Is it some kind of specific ...
1
vote
3answers
503 views

Adding Brake Caliper Cable Tension SRAM Rival

I have come across a really annoying issue that I just can't seem to put a finger on, and it is causing nothing but heart ache and frustration. I was checking to see how much wear I had on my brake ...
0
votes
2answers
495 views

SRAM X4 MTB Rear Derailleur H-Limit screw maximum open, but still on 7th Cog?

I own a 6 months old Rockrider 5.2 mountain bike. Everything was great until recently I noticed that the Rear Derailleur of my bike doesn't reach the highest gear cog, which is 8th. Its always stuck ...
1
vote
2answers
3k views

Minimum mountain groupset hard enough to resist abuse

I'm looking to upgrade my mountain bike and I would like to get something better than I have, if justified. I've never ridden any groupset better than alivio/deore, which work ok for me and have ...
6
votes
2answers
1k views

Can double chainrings be used with a clutch-type rear derailleur?

I've been reading up on Sram's CX1 1x11 cyclocross-specific group. It hinges on two technologies to minimize the potential for dropped-chains/chainslap. The CX1 clutch rear-derailleur keeps the chain ...
1
vote
3answers
159 views

Replacing a groupset in step purchases

At the moment, on my road bike, I have Shimano Tiagra groupset. I would like to upgrade it to Sram Red, but I cannot afford to pay for the whole groupset at one time and would like to buy them in ...
0
votes
0answers
2k views

SRAM Red 22 crankset & 10 speed cassette

I have a 2010 SRAM Red 10 speed groupset on my bike, and I have just changed the front crankset to the latest SRAM Red 22 compact; I will also add a new KMC KMC X10SL chain. The Front derailleur no ...
1
vote
1answer
6k views

Using a Sram 22 group with 10 speed crank

I have a SRAM Red 22 group set that has a standard crank (53/39), and I also own a SRAM Red 10 speed crank with compact chainrings. I'll be doing some climbing soon and would like to use the compact ...
1
vote
1answer
1k views

Replacing SRAM Red chain set with Ultegra - bottom bracket?

I have a cyclocross bike with an Ultegra 6700 chainset and a road bike with SRAM Red. I'm looking to get a Stages Ultegra power meter (left crank arm mounted) that I can swap between both bikes. This ...
2
votes
3answers
2k views

Replace S-RAM S7 gear hub with something better

I have an SRAM S7 gear on my bike, and I'm not content with it. I find it more or less impossible to get the adjustment right. Supposedly I just have to leave the shifter in position 7 and then ...
2
votes
2answers
415 views

Can you rebuild a Sram gear hub?

I bought a used bike with Sram 7 gear hub and after a few weeks, the chain started falling of all the time. I took it to a bike shop and they told me that the problem is in the gear hub, that it's not ...
5
votes
1answer
707 views

Ultegra 6700 Left Side Crank with SRAM Red

I'm considering buying a TT bike that has a full SRAM Red group. I'm wondering if it's possible to use my Shimano Ultegra 6700 left-side crank in place of the SRAM Red crank. Why? I've got a Stages ...
3
votes
3answers
2k views

SRAM Rival front derailleur throws chain to the outside, even after professional adjustment

TL;DR: if you have a SRAM Rival front derailleur I'd love to know if yours looks "funny" like mine does--it's described in bold. I have a SRAM Rival groupset (from late 2011), including front ...
2
votes
2answers
3k views

Removing SRAM Red Chainrings

This is almost certainly very simply, but how do you undo the chainring bolts on the SRAM red chainset? I can fit a 5mm (or 8mm can't recall now) hex head into the black screws, but they just spin on ...
1
vote
1answer
494 views

Compatibility for old Sram 7-speed shifter

A buddy asked me to fix his bike. The shifter is broken. It's an older bike with a Sram SRT300i-71 shifter. I found an exact match on that is fairly cheap on ebay, but I also found a similar model on ...
1
vote
1answer
159 views

No more chainguide from Sram?

I remember I saw somewhere new Sram system that does not require chainguide. Don't remember the model, but could you please tell me more about it? How does it work?
2
votes
2answers
1k views

Can I use a SRAM PC850 chain on a 6-speed bike?

I want to buy a chain for a 6-speed bike. I know SRAM chains have the special link, meaning that no tools are needed. I've seen a very good deal on the SRAM PC850 chain, but their website lists this ...
0
votes
1answer
254 views

Crankset for SRAM Apex Groupset

I have SRAM Apex Shifters, FD, RD, and Brakes. Can I use a SRAM Force BB30 Crankset? Thanks Paul
3
votes
1answer
858 views

Should I remove the chain before installing new rear derailleur?

I want to put a new Sram X7 instead of killed one, should I open the chain (if I have no chain lock) or it's better to open the derailleur?
2
votes
2answers
679 views

SRAM x9 3x9 with a 10 speed Shimano SXL FC-M660 Crankset

Ok so let's start this out by saying I have not a ton of money to work with, and really want to get my bike up and working with little cost as possible. I have friends that have changed out parts on ...
1
vote
1answer
5k views

Sachs Torpedo 3 gear vs. SRAM T3 vs. SRAM i-motion 3 gear

Various webshops use the following names: Sachs Torpedo 3 gear SRAM T3 SRAM i-motion 3 gear There are many inconsistencies in what exactly they call them, and for a long time I thought it was ...