I would like to purchase this hub, rim and suitable spokes, but I am not able to find dimensions of this hub necessary to calculate spoke size. I have checked usual places where such information can ...
Suppose I have a 120mm hub with a long axle, that I want to mount in a frame with 130mm dropouts. In principle, it seems to me that this should be fine, but I want to confirm this. One immediate issue ...
I have a pair of Shimano FH-2200 front and rear hubs lying around which I no longer use and I would like to save money by using them for a wheel build but am unsure whether they would be up to the ...
I have built a number of wheelsets and always struggle to get the hub logotype "upwards" and faces the valve hole in my rim, so that it aligns with the tire logo. Instead of getting it right the ...
It seems conventional wisdom says to alternate inward vs outward spoke heads going around the flange when lacing a wheel, like this: However, I'm wondering what the reason for this is, and if it ...
I'm in the planning stage of building a new bike. This will be a light road bike for city runs and transport. For racing I have other bikes. I'd like to build the bike from ground up by assembling ...