5
votes
3answers
422 views

What tolerances should I use for spoke tension when building a wheel

I am replacing the rim on my rear wheel with a new one. I've brought up the tension on the spokes close to the final tension by truing / increasing tension / truing / increasing tension. I've got ...
2
votes
2answers
858 views

Tensioning rear wheel?

Tensioning a front wheel is - at least in theory - very simple: Go around and tighten each nipple by e.g. a quarter turn. Then re-adjust trueness if necessary. I guess if I'd do the same to a ...
7
votes
3answers
3k views

Why offset the rear rim to the hub and not the hub in the frame?

I'm currently reading The Bicycle Wheel by Jobst Brandt, and I'm reading all of the issues with offsetting the rear rim toward the drive side of the hub... Asymmetry in a rear wheel built for a ...
4
votes
2answers
522 views

What are wheel tension relief machines called?

At a San Diego bike shop I saw a machine that is purported to take the tension out of a wheel while it's being built so that the tension won't be released when you first start to ride it. ...