I'm currently reading The Bicycle Wheel by Jobst Brandt, and I'm reading all of the issues with offsetting the rear rim toward the drive side of the hub... Asymmetry in a rear wheel built for a ...
I'm building two new sets of mountain bike 26" wheels, and I'm wondering what to go with. Both are double walled rims, so in addition to the standard rim tape and strips, I can use a product like ...
Straight spokes will have the same diameter through the whole length, double butted spoked are thinner in the middle than at the ends. Here's my current understanding of the benefits of each: Double ...
I'm building two sets of 26" wheels, one pair of 32h triple cross with Bullseye hubs with machined sidewalls for rim brakes, and another pair of 24h double cross with Alex A-Class hubs with Sun rims ...
Recently I had to replace a hub on the front wheel of my workhorse bike. That meant unlace it and lace it again. Since the hubs were identical, I used the same old spokes, same not-so-old rim and same ...
I'm in the planning stage of building a new bike. This will be a light road bike for city runs and transport. For racing I have other bikes. I'd like to build the bike from ground up by assembling ...
I'm planning to replace the hub on my front wheel, from a QR to a 20mm. How much labor, skill, equipment, etc. does that need, and how much time should I expect a pro to charge for, to do the ...
At a San Diego bike shop I saw a machine that is purported to take the tension out of a wheel while it's being built so that the tension won't be released when you first start to ride it. ...