Questions referring to the craft of assembling bicycle wheels.

learn more… | top users | synonyms

2
votes
4answers
1k views

Wheel size for heavier rider, larger vs smaller

I am a heavier rider, whilst still reducing, I am over 120kg or 260lb. I have broken many spokes on the rear of my 26er sub-$500 mountain bike. Broken at the elbow. There could be many factors for ...
7
votes
4answers
3k views

How effective is checking spoke tension by ear?

Sheldon Brown's Wheelbuilding page links to the article: Check Spoke Tension by Ear. Obviously a tensiometer would be ideal, but Sheldon suggests that checking spoke tension by ear is a reasonable ...
5
votes
1answer
299 views

Wheel going badly out of true on final tightening

On two occasions (same wheel, loosened everything off and re-did the whole thing after the first time) as I've applied a final half turn to tighten the spokes round the wheel it's gone from being ...
6
votes
6answers
1k views

How to build a wheel

I'm in the planning stage of building a new bike. This will be a light road bike for city runs and transport. For racing I have other bikes. I'd like to build the bike from ground up by assembling ...
5
votes
1answer
2k views

Truing an 'out of round' wheel

I am building my first wheelset. The front wheel went without a hitch - nice and true both radially and laterally. However, the rear wheel has a pronounced (5mm) bulge over about 1/4 of it. The ...
5
votes
4answers
3k views

How long should it take to rebuild a wheel?

I'm planning to replace the hub on my front wheel, from a QR to a 20mm. How much labor, skill, equipment, etc. does that need, and how much time should I expect a pro to charge for, to do the rebuild?...
3
votes
1answer
172 views

Trailer Lighting Using a Dynamo Hub [closed]

I have a B.o.B. Yak trailer which uses a ISO 305 mm BSD rim. I'd like to build up a wheel for the trailer using a dynamo hub (perhaps a Sanyo H27) so that I could have lights on the trailer. I know I ...
2
votes
2answers
3k views

Can I run a wheel with a 130mm hub on a mountain bike with 135mm spacing?

I'd like to build a wheelset that would work on my cross bike or my 29er, assuming I had disc brakes on the 29er and rim brakes on the cross bike, is there any way I could use a 130mm hub (that fits ...