Tensioning a front wheel is - at least in theory - very simple: Go around and tighten each nipple by e.g. a quarter turn. Then re-adjust trueness if necessary. I guess if I'd do the same to a ...
I'm currently reading The Bicycle Wheel by Jobst Brandt, and I'm reading all of the issues with offsetting the rear rim toward the drive side of the hub... Asymmetry in a rear wheel built for a ...
At a San Diego bike shop I saw a machine that is purported to take the tension out of a wheel while it's being built so that the tension won't be released when you first start to ride it. ...