I have a Whyte T-129s and the lever on the maxle is now very loose when putting the wheels back on. It no longer holds in place - is it possible to fix this?
The front wheel on my bike is quick-release, and I often remove it when locking up my bike. Then when I go to put it back on, sometimes it is a bit difficult to make sure that the wheel is centered ...
Basically, can a older (early 90's) American/SAE measured non-suspension fork take a quick release wheel? I'm looking to rebuild/restore my old Huffy Fire Mountain MTB made around 1990*. It has a ...
My bike's front wheel is quick-release (QR), but the rear has a traditional skewer (because of the hub gears). It also has disc brakes, and as you'd expect, there isn't a lot of clearance between the ...
A front wheel with a quick release mechanism can be installed in two orientations: the lever on the left, or the lever on the right. Does it matter in which orientation it's installed? If so, would ...
I have to say I am not a fan of quick-release, especially for seats. I do not need to raise and lower my seat nearly enough (almost never) to justify the annoyance of having to take my seat with me or ...
I've just bought a second hand road bike which doesn't have Quick Release Skewers. Can I just buy a set of QR Skewers and fit them? Are they a standard size? Are there any gotchas waiting to bite ...
Currently trying to find larger bikes for our kids aged 5 & 7. Oldest's next bike is going to be a struggle to fit in the back of the car (for various reasons they cycle to school in the morning ...
My commuting/cyclocross bike (a Surly Crosscheck) has a problem. If I tighten the quick release skewer to a normal level, sort of firm to close it, then if I step on the pedals hard at some point, ...