I had a flat tire and replaced the air chamber. While doing that the rubber stripe that stands between the wheel and the air chamber ripped and it's no longer a ring. It´s hard to put it correctly and ...
I'm building two new sets of mountain bike 26" wheels, and I'm wondering what to go with. Both are double walled rims, so in addition to the standard rim tape and strips, I can use a product like ...
The ends of my rim tape are about 1mm apart, but the spoke holes are covered. Is this ok, or should I pull it off and start with a fresh roll? Here's a picture.
I have a Gary Fisher mountain bike. I was changing the tube in my rear tire. The rim strip (rubber lining around the wheel to protect the tube from the spokes) had moved a bit so I went to adjust it ...