0
votes
3answers
92 views

Can I use cartridge bearings on my wheel hub?

I have a vintage road bike, at the moment there are loose metal bearings in the hubs. Some of the bearings are missing. Can I buy cartridge bearings or do I need to buy loose bearings? Thanks
4
votes
1answer
652 views

Fixing damage to brake rim surface

somehow the alloy braking surface of my rear wheel's rim has got a series of quite shallow lacerations, less than a mil' deep bunched quite closely together (the effected area is no more than 1/8 of ...
1
vote
0answers
113 views

What to upgrade on a Raleigh MV7? 20"

I am undecided to upgrade the BB and crank or change a wheelset. Any advice on what might help me spend less effort pedaling? I actually find a steel 26" MTB easier to pedal.
8
votes
3answers
2k views

Why are the rear wheels of Time Trial Bikes disc shaped rather than having spokes?

Won't having disk shaped wheels cause more wind resistance with crosswinds? What are the benefits of having these sort of wheels?
3
votes
3answers
10k views

Most effective upgrades on Road bike

Earlier this year I purchased my first road bike (a 2013 - Felt F75). I had never really ridden before, so I didn't want to spend too much money up front not knowing how much I would actually ride. ...
2
votes
3answers
742 views

What does an expensive wheel have over a cheap wheel?

I'm looking to get a new front wheel at the moment for what is (supposed to be) an inexpensive commuter bike. My question is what's so good about a £100 wheel vs a £25 wheel? The cheapest option my ...
3
votes
2answers
449 views

Loud free hub suddenly become quiet

I have a fulcrum racing 5 evo which has a loud free hub (like other campy) for about 5 years now. I like the loud noise when coasting because I don't need to put a bell on the bike. On my last ride, I ...
5
votes
5answers
420 views

Can fresh hot asphalt damage slicks?

Today I was riding with my road bike when I suddenly hit a patch of hot asphalt. The day before the one side of the road was already filled with a hard first load, so I didn't think much of riding ...
1
vote
1answer
260 views

What could cause a screeching noise when going downhill without brakes?

Going downhill on my road bike with aero bars without applying brakes results in a terrible screeching coming from what seems to be the front wheel. Are the bearings going out?
20
votes
5answers
1k views

Spokes keep breaking - bad hub or bad build?

Background information A bit of background information (I'll try keep it brief): Last year I bought an old but unused bike, 5 speeds with internal gearing. Apparently the shop bought a lot of bikes ...
2
votes
2answers
478 views

Time Trial/ Tri Aero Wheels Query

I am in constant debate with my colleague regarding the use of aero tt/triathlon wheels (82/101) for normal/general road use (fear of buckling etc?). I was wondering what peoples thoughts were on ...
3
votes
1answer
279 views

How much does nipple choice affect wheel weight/stiffness?

Would I be a fool to replace the nipples on a Dura Ace 7900 C24 wheelset with a set of DT Swiss anodised alloy nipples, in the interest of aesthetics? I want the bike to look nice, but don't want to ...
1
vote
1answer
239 views

Calibrate Tensiometer

I want to calibrate my Park Tool TM-1 for my weird spokes. I want to build a box with some kind of weight mesuring device where a spoke can be put under 1600N of tension. Rummers on other boards say ...
2
votes
2answers
4k views

How to Inflate Tires

I recently got a new beginners road bike: http://www.amazon.com/Takara-Kabuto-Single-Speed-Road/dp/B004W8LG1S/ref=cm_cr_pr_product_top And an air pump: ...
6
votes
5answers
6k views

Deep-Profile Carbon Wheels — How to choose depth?

I'm doing research for a future purchase of new wheels (for everyday riding) for a 2012 Cannondale CAAD10 Ultegra. I want to spend ~$1000 (give or take $200 or so). In my price range I've found: Boyd ...
6
votes
2answers
1k views

Carbon 700c Wheels: What does 33/50/60/88 mm refer to?

I've been browsing 700c carbon rims on ebay, and noticed most are listed with the 33/50/60/88/etc mm in the title. What does this represent? It doesn't appear to be spoke/nipple holes. ...
7
votes
4answers
739 views

Wheel rigidity, is it noticeable and should I care about it?

I have a friend who shopped for Aero wheels recently and I heard a lot of talk about how this wheel was more rigid than that wheel and so on. While I understand that a more rigid wheel should have ...
8
votes
2answers
4k views

Spokes loose on a new wheel, is this expected or a bad build?

So a couple of months ago, I bought a new front wheel from the local bike shop. It's a 28 spoke wheel, rims are the DT Swiss RR465 and the hub is a 240s. I put 500-600 km on it and noticed a rattle ...
13
votes
5answers
1k views

What should I look for in choosing wheels for a road bike?

I have a commuting/touring bike and my riding is a good bit of commuting mixed with weekend rides of up to 50 miles. In my lame knowledge, I'll assume that lighter wheels can be had when you spend ...