The big round things your bike rolls on. Rims, spokes, hubs, etc. If it's all about the rubber part, "tire" tag is better.

learn more… | top users | synonyms (1)

1
vote
0answers
112 views

What's the inner width of my rim?

I just measured the inner width of my rim with a ruler and it seemed to be a hair over 14mm. Looking at the tire sizing chart on Sheldon Brown's site it doesn't have an entry for 14mm inner width ...
1
vote
1answer
148 views

Can I mount a wheel with a narrow hub to a wide frame?

Suppose I have a 120mm hub with a long axle, that I want to mount in a frame with 130mm dropouts. In principle, it seems to me that this should be fine, but I want to confirm this. One immediate issue ...
0
votes
0answers
75 views

Difference between Mavic Deemax Ultimate 2011 and latest version

Have an offer to get Mavic Deemax Ultimates from 2011 for my downhill bike. They cost half as much as the current model. Can anyone tell me what the changes are compared to the current models?
4
votes
3answers
596 views

26“ vs 28” wheels for touring

I was told by a friend that 26" wheels are better than 28" wheels for touring. Is this true? What are the pro's and con's? I'm told that 26" wheels are stronger for their spoke count. What are the ...
0
votes
3answers
242 views

Rebuilding a rear wheel

My rear hub is damaged. I have not yet inspected the source of the damage, but the wheel is moving sideways when rotating (a LOT), plus I rode it like this for about 35km. Therefore, I find it ...
0
votes
1answer
306 views

Cheap Carbon Fiber Wheels

Right, I guess inserting where they're made in the title would be a little politically incorrect but essentially the link below would give you the exact product that inspired the question :- Cheap ...
2
votes
2answers
112 views

Direction of chain whip

Is there an easy way of working out which way round to apply a chain whip to a cassette for its removal? I've taken plenty of them off in my time but always end up having a couple of tries at it ...
6
votes
2answers
524 views

Does a rear wheel work up front?

Assuming that the wheel will fit in the drops, will a rear wheel (minus the freewheel/cassette) work for a front wheel? What kind of problems could this present? I happen to have a spare back wheel ...
0
votes
1answer
130 views

Tire's won't inflate after winter

A few weeks ago I tried to take my Trek road bike for my first ride since last fall. It has been sitting in my (uninsulated) garage over throughout the winter and when I tried to inflate my tires the ...
6
votes
1answer
186 views

Spoke Tension Guidelines

Generally what should the tension be for spokes in wheels built up from scratch? For the front wheel? Should the tension be different for drive-side/non-drive-side spokes in the rear? Should tension ...
0
votes
0answers
92 views

Extra screw after removing front wheel (plus enclosed hub brakes)

My partners bike, a Pashley Princess Sovereign, had a flat front tyre, and whilst I was out a friend came to have a look. He removed the front wheel (detaching the brake, a fully enclosed brake hub), ...
0
votes
2answers
1k views

What do I need to know about fitting new wheels on a bike?

My girlfriend has had the wheels stolen from her bike. I'd like to replace them, but we're working with a limited budget so I'm going to do the work myself and source the parts second hand. I've done ...
2
votes
2answers
142 views

Will riding cobblestones and rough streets kill my cup and cone hubs?

I live in pittsburgh, and we have some hills and streets which are belgian block, brick, poorly paved and pocked with potholes. It can be very jarring, but I still find myself flying down these ...
1
vote
1answer
70 views

Wheels changing on Giant Rebel 4 [closed]

Very often even without extreme riding my wheels are getting light 8-like form. Is this the reason to change wheels or sleeve Its more cosmetic problem which can evolute to more problems My bike is ...
5
votes
3answers
495 views

What tolerances should I use for spoke tension when building a wheel

I am replacing the rim on my rear wheel with a new one. I've brought up the tension on the spokes close to the final tension by truing / increasing tension / truing / increasing tension. I've got ...
2
votes
2answers
447 views

What does a “dished” wheel mean? How to tighten spokes on such a wheel, without a spoke tension meter?

Should all the rear wheel spokes have equal tension? Or should the spokes from the side of the cassette be tighter, in order to skew to wheel in that direction, and the wheel to be centered in the ...
1
vote
1answer
418 views

Can it fit the rim i have? [duplicate]

Will a 26x1.50 or 26x1.25 slick fit on a rim that I now have with a measure on the tire 26x2.00 and the rims I have are 26inch bontrager AT-550?
2
votes
1answer
282 views

What size of slick tire should I buy?

I purchased a mountain bike and I ride on the road most of the time and I was looking at slicks for my bike. My tire size that I have now is 26x2.00 and the rims. I have on are AT-550 26inch what size ...
5
votes
2answers
314 views

Does group riding negate the aero benefit of deep rim wheels?

I've been weighing up some options over wheels and in doing my research I've noticed that rim depth may be a bigger factor than I had previously considered. On the one hand, shallow rims are typically ...
6
votes
2answers
884 views

How to determine if my rear axle is bent?

When riding, the rear wheel feels as if there is a tiny pebble, stuck within the thread. The wheel is one week old, the hub is Shimano FH-M475. I have done only very tiny jumps - for example from ...
8
votes
2answers
2k views

What is the purpose of the plastic disk between the cassette and the rear wheel?

There's a plastic disc between the cassette and rear wheel on my bicycle. It doesn't seem to have any effect on the actual drivetrain; but I've seen it on a number of bicycles. What is it for?
2
votes
3answers
146 views

Wheel bust after 10 months, is this normal / usually covered by warranty?

Not sure if this is the right place to ask... I bought new bike about 10 months ago. The past few weeks I've had no end of trouble with the rear wheel (Mavic Aksium) in regards to spokes. About 4-5 ...
1
vote
2answers
430 views

What causes a wheel to seize?

My rear fixed-gear wheel seized up yesterday on my commute home. I suspect it's the result of my bone-headed adjustment after replacing a broken locknut on the axle (I may not have put the new ...
9
votes
1answer
1k views

What is a thru axle?

I have seen thru axles mentioned in various places but never explained or even described. I found a post on another site where someone asked the same question and got lots of debate in response, but ...
1
vote
2answers
421 views

How to build a fixie bike? [closed]

I’m thinking about building a fixie and was wondering what are the best types of frame, wheels etc to use and how long the whole building process may take?
1
vote
2answers
866 views

Are deep V wheels only for fixed gear bikes?

I'm in the market for a new set of wheels. I've been noticing a style which I think is called "Deep V". I plan on adding gears to my currently single-speed bike (not a fixed gear). However, searching ...
0
votes
2answers
198 views

Do quick release wheels require certain design in the fork?

Basically, can a older (early 90's) American/SAE measured non-suspension fork take a quick release wheel? I'm looking to rebuild/restore my old Huffy Fire Mountain MTB made around 1990*. It has a ...
1
vote
1answer
351 views

Wheel performance in cross wind

I'm looking to buy a pair of Mavic Cosmic Carbone SLE or Mavic Ksyrium SLR. The Cosmic's are 50mm height, Ksyrium 25mm. I'll only be using the wheel for racing. How do they perform in cross wind. ...
3
votes
2answers
222 views

Wheel spokes & strength

I'm just about to buy a new bike. It comes with Shimano R501 wheels, which are rather lightly spoked (20 front, 24 rear). I weigh about 230lbs (I'm 6'6") - do you think it'll be worth getting a ...
0
votes
2answers
154 views

Upgrading a GF Tarpon to 650B wheelset

I'm considering upgrading my GF Tarpon to a 27.5" wheelset. Is this possible? And how will affect the ride? In general, I've heard people say no, and some people say yes (nothing specific about this ...
0
votes
1answer
89 views

Getting started with carbon fiber DH/XC wheels

I'm looking for some carbon fiber DH or XC wheels and don't know where to start, as I'm new to this. Could you give me some help on where to get started?
1
vote
2answers
117 views

Are heavily worn rims safe to use on trainer?

I've got a wheelset with heavily worn rims. This was a cross wheelset used for riding in pretty sloppy conditions all the time. This was a rim brake based wheelset and used with cantilever brakes. ...
2
votes
2answers
1k views

How can I tell if my wheels need replacing due to rim wear?

I have v-brakes which have started to groove my rims. What is the surest way to know if they need replacing?
5
votes
1answer
1k views

How do you install a hub dynamo?

I want to buy a Shimano hub dynamo, but I'm encountering problems getting a bike shop to commit to installing it for me if I buy it. So I have a couple questions that I'm hoping some of you guys might ...
1
vote
1answer
576 views

What is the frame called that fits 700c wheels?

I have a set of 700c wheels and am looking to buy a used frame. I want a frame that fits the 700c tires so I don't have to file down the front dropouts or use long reach brakes. What are the frames ...
0
votes
1answer
127 views

How to alter a sports cycle to avoid wheel bend

I have a Hero Hawk Nu-Age, which I bought it two years back. In India, this cycle was mostly used for sports. As this cycle has very thin wheels 27 * 1-1/4, I could not ride this on bumpy roads for ...
2
votes
4answers
1k views

Weight of wheels vs. weight of tyres

On my touring bike, about a year ago, I upgraded my tires from the low-end stock ones to better lighter ones. The weight gain was 205g per tire so 410g on the whole bike, plus a few grams on the tubes ...
3
votes
2answers
442 views

Way to fix outward dent in rim?

On a ride today I ran over a water run off too fast and have caused an outward bulging dent in both sides of my rim. The bulge is hardly noticeable to see or touch but I "think" I can feel it when ...
0
votes
1answer
387 views

Are shimano FH-2200 hubs strong enough to use in a tubular wheel for CX racing?

I have a pair of Shimano FH-2200 front and rear hubs lying around which I no longer use and I would like to save money by using them for a wheel build but am unsure whether they would be up to the ...
4
votes
3answers
147 views

How are the wheels spokes laced in the bikes you buy at shops?

Is there a machine that does the lacing or does it have to be manual work? And in the first case, what does it look like and how does it work?
9
votes
3answers
1k views

Do road tubeless tyres lose air faster?

I just replaced my rear wheel with a road tubeless (Bontrager RL TLR). Was lucky to have the bike shop installed the tyre, took two blokes to put it on the rim. Anyway, my second ride was a couple of ...
3
votes
1answer
629 views

Lock nuts on new hubs seem strangely tight, but can't seem to loosen them. Any advice?

As part of a new build I'm working on, I just had some wheels built up. The hubs are large flanged Miche Primatos with a double-sided fixed wheel. The rear wheel, straight out the box, seemed weirdly ...
1
vote
2answers
282 views

Can a 2012 Carrera Vulcan run 26 x 2.25 tires?

I'm looking to replace my tires. Currently I have the standard 26x2.1 tires that came with the bike and am looking to replace them with a set of 26x2.25, could this be done?
2
votes
2answers
562 views

How bad is handling with only front aero wheel?

I think it's obvious that the only reason to have aero wheel at front and regular wheel at rear is budget. I did some research on this and what I found was aero front wheel is more important and rear ...
2
votes
4answers
2k views

How can I remove a stuck rear cassette?

I've been trying in vain to remove a rear cassette that I myself installed about a year ago. I may have over-tightened the lock ring and now I can't remove it no matter what position I hold the ...
2
votes
2answers
185 views

Using a UST wheel after a dent has been repaired

I found a dent on my rear wheel on the weekend, a UST rim which I had been running a UST tyre on. This was allowing the tyre to burp (not running sealant) so I had to repair or replace. It was the ...
3
votes
3answers
363 views

Rear wheel odd shape (goes up and down) fixit or buy new?

I have what I think is Specialized Hardrock mountain bike. Recently, when riding on a flat surface the back wheel has a noticeable up-and-down movement with each spin. It is like ridding a horse in ...
1
vote
1answer
133 views

Can a bent hub damage my fork?

I've recently noticed that my front hub is bent, or at least the parts that connect to the fork (any name for this?). It's not a huge bent, but it's clearly visible with your eyes. It fits the fork ...
6
votes
2answers
294 views

Why have 29-ers arisen only recently? [closed]

I have been hearing for the past months about twenty nine inch wheels for bikes, and seeing such at the showroom windows and on the street. Also heard that they have a lot of advantages and a couple ...
5
votes
1answer
1k views

Fixing damage to brake rim surface

somehow the alloy braking surface of my rear wheel's rim has got a series of quite shallow lacerations, less than a mil' deep bunched quite closely together (the effected area is no more than 1/8 of ...