The big round things your bike rolls on. Rims, spokes, hubs, etc. If it's all about the rubber part, "tire" tag is better.

learn more… | top users | synonyms (1)

2
votes
1answer
273 views

Finding Correct Size Wheel for Bike

I am looking to replace the stock wheelset on my 2009 Jamis Aurora. I'm looking to replace wheels because I have a number of spokes break over the wheel lifetime and now my rear wheel is only in true ...
2
votes
1answer
259 views

Unknown freehub, trying to source

I have a neighbours daughters bike to fix at the moment. The freehub is totally seized. I've removed the freehub from the hub itself, but can't identify it nor have I see any like it. It doesn't have ...
1
vote
1answer
494 views

What components are recommended for entry level mountain bike?

I am looking for an entry level mountain bike. I plan on using it on real mountain bike trails, not just unpaved trails and greenways. Specifically, here's what I'd like: good shifters/derailleurs ...
3
votes
4answers
13k views

Most effective upgrades on Road bike

Earlier this year I purchased my first road bike (a 2013 - Felt F75). I had never really ridden before, so I didn't want to spend too much money up front not knowing how much I would actually ride. ...
1
vote
1answer
196 views

Spoke tension - is a left tilt ok to prevent explosion?

The left hand steel blade spokes of my WH-RS30 (not 30A) are constantly exploding inside of the nipples when going up hill in a standing position. I have increased the right hand side tension to about ...
2
votes
1answer
138 views

Aero spokes strength on a family bicycle

I am building a new wheel for my family bike: there will be a kid seat on the back rack over the wheel. I picked up some cheap double butted flat aero spokes (not elliptical but flat). From reading ...
3
votes
1answer
308 views

Can i use a 10 speed hubbed wheel on my 7 speed/cassette bike?

I ride a 2005 Claud Butler San Remo with a Sora 7 cassette on the back. My back wheel has broke and is not repairable and I have bought an Ambrosio WS23 Wheel (700mm) with Bianchi hubs which I believe ...
2
votes
2answers
543 views

Why is there so much friction on my rear wheel?

With the chain detached, when I spin my rear wheel it slows down really quickly (2 turns?) as if the brakes are lightly on. The brakes are well clear of the wheel though. Any idea what it might be? ...
0
votes
1answer
253 views

What is a Q-LOC axle? Is it compatible with Quick Release?

So what is a Q-LOC axle? If I decide to install a fork with such an axle, do I need another front wheel or is is it possible that my current QR hub is compatible. What do a Q-LOC wheel look like and ...
1
vote
1answer
226 views

rebuild shimano wheel

I've dented the rim on my Shimano WH-RS-10 rear wheel. I found the tech doc pdf. I've had wheels rebuilt before but always with rims that were available to consumers. I can't find any place that sells ...
4
votes
3answers
1k views

What tools are required to replace a spoke?

When out riding at the weekend, for the very first time, I managed to break a spoke on my wheel. Because I've not done it before, and I want to get back out on the bike soon, this time around I am ...
2
votes
1answer
174 views

Spoke nipple broke, should I replace more than one?

I had a spoke nipple break on my rear wheel, the threaded part broke off right where it enters the wheel. The nipples appear to be aluminum alloy, which I believe are not as durable as brass nipples. ...
2
votes
3answers
851 views

What does an expensive wheel have over a cheap wheel?

I'm looking to get a new front wheel at the moment for what is (supposed to be) an inexpensive commuter bike. My question is what's so good about a £100 wheel vs a £25 wheel? The cheapest option my ...
2
votes
2answers
2k views

why do my pedals keep turning when i freewheel?

I've had my bike up on a stand to give it a clean. As I was cranking the pedals to clean the chain, then let the pedals go, I noticed that when the back wheel was freewheeling it would start the ...
2
votes
2answers
1k views

What's wrong with my rear wheel? Wheel moves about 1/4" front to back when brake is fully applied, cassette seems a bit wobbly, some rubbing noise

I first started inspecting my wheel because I noticed when I applied my brake while not riding, I could push my rear end and the wheel would turn forward and back about 1/4"-1/2" each way (but the ...
2
votes
1answer
214 views

Can I get a wheel dished without the bike?

I broke a spoke on my rear wheel, and ended up messing with it a bit too much - I may need to get it re-dished. If it's a common market model bike, can I simply take the wheel into my bike shop, ...
3
votes
2answers
530 views

Loud free hub suddenly become quiet

I have a fulcrum racing 5 evo which has a loud free hub (like other campy) for about 5 years now. I like the loud noise when coasting because I don't need to put a bell on the bike. On my last ride, I ...
9
votes
3answers
394 views

What happened? tube blew the rim?

Had a puncture today, removed the tube, patched it and made it home. Obviously since I only have a mini-pump I could not inflate it to my 8 bar usual pressure. When home, I took the wheel upstairs to ...
3
votes
1answer
2k views

How to calculate bike stand-over height using frameset geometry and wheel radius?

While it's best to buy through fitting a bike in store, it's not always possible (discussed here). On some websites, the stand-over height of a bike may not be listed as part of the specifications. ...
0
votes
1answer
567 views

Brakes contacting wheel after reattaching

I removed the rear wheel (quick release) from my Trek bike to install a bike trailer hitch. After replacing the wheel, the brake pads are rubbing. I did over-tighten the wheel when I first put it ...
1
vote
2answers
261 views

Running one wheel with clincher and one with Tubular

I have a carbon clincher wheelset and am looking to get a disc wheel, but don't want to spend the money for the clincher version. Would there be any foreseeable issue with running one wheel with a ...
9
votes
2answers
644 views

Will a bike stand that holds one wheel damage my bike?

I have a similar bike stand to this at home: I'm happy putting my wife's and my commuter in it but worried that it will damage the wheels of my XC bike if left in there for long periods. Can wheels ...
5
votes
5answers
456 views

Can fresh hot asphalt damage slicks?

Today I was riding with my road bike when I suddenly hit a patch of hot asphalt. The day before the one side of the road was already filled with a hard first load, so I didn't think much of riding ...
1
vote
1answer
288 views

What could cause a screeching noise when going downhill without brakes?

Going downhill on my road bike with aero bars without applying brakes results in a terrible screeching coming from what seems to be the front wheel. Are the bearings going out?
0
votes
1answer
194 views

Replacing thick wheels with thinner ones

My heavy bike (~15 kg) has thick wheels, the rim width of each is about 3 cm. Accordingly, the tires are also thick (~4.5 cm). Unless the tires are fully pumped up, the bike is difficult to ride and ...
1
vote
1answer
341 views

Can I replace a 1/2 inch bolt with a 14mm one to secure my axle?

My front wheel is secured with 14mm bolts, while my rear wheel uses 1/2 inch bolts. Turns out my multitool has only a 14mm wrench, so I can't change the rear tire with it. Rather than carrying ...
1
vote
1answer
320 views

dishing on alfine hub

I am building a wheel with an Alfine 8 speed hub which has space for a disk brake. I am measuring the dishing by supporting the rim and measuring the distance from the table to the end of the through ...
1
vote
1answer
896 views

Rear tire has started rubbing frame at one spot

Riding my bike within my suburban residential neighborhood, I felt a shock, like a snap although I don't think anything snapped, followed by a rubbing noise every few seconds. Pedaling and the brakes ...
8
votes
3answers
523 views

What is the purpose of the rubber stripe between the wheel and the air chamber?

I had a flat tire and replaced the air chamber. While doing that the rubber stripe that stands between the wheel and the air chamber ripped and it's no longer a ring. It´s hard to put it correctly and ...
8
votes
4answers
3k views

Are aerodynamic rims worth additional weight?

I was under the impression that reducing the weight of your wheels is important. However, I'm noticing that many of the extremely high-end aerodynamic rims are actually heavier than cheaper rims by ...
3
votes
2answers
414 views

lacing Alfine wheel, trailing spokes inside or outside hub flange

I am about to lace an Alvine hub wheel. Reading Sheldon Browns article there is a suggestion that the trailing, and so key, spokes might be better laced the opposite of what would be done for a ...
1
vote
1answer
250 views

What's the correct term for a 700x23c disc wheel?

I'm looking to convert my fixie to a front wheel disc brake set up. I've narrowed down a fork that looks promising, and I'm on to the wheel. I've got 700x23c tires I want to keep, so I want the wheel ...
2
votes
2answers
810 views

Can I damage a tubeless rim using a wire bead tire on it?

This question is very similar to Can I use a standard tyre on a tubeless rim? but while the answers there set out that it's possible I'd like to understand the risks of doing it. I recently saw a ...
4
votes
3answers
876 views

Retrieving Loose Nipple from Inside Rim

So I have a wheelset that I really like, only problem is the first time I rode the wheels a nipple came off the spoke when I launched off a speed bump going downhill. For a long time it was silent ...
-3
votes
2answers
440 views

keyed (locking) skewers and seat bolts: recommendations? [duplicate]

I know nothing is thief proof, but some systems are more of a deterrent than others. Looking for recommendations for good systems. Perhaps more importantly I'd like to hear about systems found to be ...
9
votes
6answers
1k views

My front wheel steers right. How do I solve it?

Some time ago I had a little accident with my bike. With the accident the front wheel got unaligned from the handlebar. I simply put it in the right position holding the wheel with my legs and ...
7
votes
3answers
2k views

Are deep rims more durable for a heavy rider?

Since I weigh quite a lot (~115kg), and ride on bad roads with many holes and cracks, I am looking for rims that would be able to cope with bad conditions without getting out of true or breaking. My ...
0
votes
1answer
281 views

Product selection help: wheelset for vintage(ish)steel roadbike

I have an 80's vintage Peugeot steel frame that I'm gradually trying to upgrade. I'm thinking about improving the wheels and originally thought a set of Mavic Aksiums would be a nice upgrade. Problem ...
2
votes
2answers
1k views

Can I run a wheel with a 130mm hub on a mountain bike with 135mm spacing?

I'd like to build a wheelset that would work on my cross bike or my 29er, assuming I had disc brakes on the 29er and rim brakes on the cross bike, is there any way I could use a 130mm hub (that fits ...
1
vote
3answers
756 views

Are velocity A23 rims suitable for building a wheelset for a 29er Mountain bike?

I'm was looking to build a new wheelset that I can use on my rigid Karate Monkey 29er using either cyclocross or Trekking tires for gravel / dirt road riding and 29er tires for singletrack (mostly ...
2
votes
2answers
466 views

Spokes for Shimano Ultegra Wheelset

I had a minor run in with car early last month and my front wheel got trashed: LBS says between labor, paying for the proprietary spokes (you have to buy for front and back as well I guess), ...
1
vote
7answers
1k views

Why won't tires go on my Velocity A23 rims?

Recently bought the A23's. Wanted to see if the wider rims lived up to the hype of a smoother ride, better cornering, etc. After getting the wheels built by my shop, however, it appears to have been a ...
5
votes
3answers
2k views

Do I need a separate dishing tool for building wheels with park tool TS-2.2 truing stand?

I'm trying to get started with some wheelbuilding. I've got a Park Tool TS-2.2 truing stand. Can I just rely on the calipers to provide a guide for centering the rim and dishing rear wheels or will I ...
2
votes
1answer
495 views

Do new wheels usually come with freehubs?

I was looking around for new wheels and thoroughly confused about the common approach to freehubs. Do they usually come with the freehub or do I have to actually put that on? If they do come with ...
5
votes
1answer
219 views

Second wheel set for winter

I commute every day on my trekking bike and when it is snowy/icy, I replace my normal tires with some studded tires. The studded tires are ace, but replacing the tires is a real pain in the ass. So ...
6
votes
5answers
865 views

Is 650b a better platform than 26“ or 29”?

I have seen more and more reference to the 650b (27.5") mtb wheel size. Whilst I don't see any need for a new standard, does anyone know of any benefit to have a 27.5" wheel over a 26" or 29"? While ...
3
votes
2answers
1k views

Mounting a 7-Speed Cassette on an 8/9 speed hub

I asked an earlier question regarding putting modern road wheels on my old steel frame. After clarifying a few things the main issue to me is the number of gears on the freehub. (The freehub I'm ...
2
votes
2answers
185 views

Replacing rear coaster brake wheel on 1959 Roadmaster

I have to replace rusted/'bent rear wheel with coaster brakes on my 1959 Roadmaster. I have found on Amazon the same size (24 X 2.125) new rear coaster brake wheel. Will it fit? What parameters I ...
3
votes
2answers
642 views

More freehub removal problems.

So helpful folks here helped me get the cog and lockring off, and now I'm stuck with this. I looked on Park's website again for "removal of freewheel" help, but mine didn't fit with any of the ...
5
votes
5answers
956 views

Fixed gear wheel hard to spin

My wheel feels harder to spin than usual. I just put new tires on, and at first I thought a tire must be rubbing, but that's not the case. Seems like the hub might just be gunked up inside, but I'm ...