The big round things your bike rolls on. Rims, spokes, hubs, etc. If it's all about the rubber part, "tire" tag is better.

learn more… | top users | synonyms (1)

3
votes
2answers
660 views

More freehub removal problems.

So helpful folks here helped me get the cog and lockring off, and now I'm stuck with this. I looked on Park's website again for "removal of freewheel" help, but mine didn't fit with any of the ...
5
votes
5answers
971 views

Fixed gear wheel hard to spin

My wheel feels harder to spin than usual. I just put new tires on, and at first I thought a tire must be rubbing, but that's not the case. Seems like the hub might just be gunked up inside, but I'm ...
4
votes
1answer
776 views

Mountain bike axle diameters

Out of interest I would like to understand the benefits of having a 15mm or 20mm through axle over a 9mm QR (and a 10mm vs. a 12mm TA on the rear). What difference does it make to the ride?
0
votes
1answer
178 views

Is it possible to put a 700c wheel on to an old Raliegh road bike?

I've been using a trainer during the winter months and went out on my bike the other day and half way round I got a flat!!! I spoke to the bloke in a shop who said that using the bike on the trainer ...
7
votes
5answers
6k views

How can I tell if a rim is bent or if the wheel is just out of true?

How can I tell if a rim is bent or if the wheel is just out of true?
6
votes
1answer
4k views

Upgrading wheels on a vintage Peugeot Frame

OK so I have a Peugeot Galibier bike that consists of a Reynolds 301 steel frame. A while back the original derailer gave up the ghost while riding, bending the rear-wheel spokes in the process. I ...
4
votes
3answers
166 views

Were these bearings defective?

A couple of days ago my girlfriend's bicycle broke. The rear wheel was stuck. Tonight I had finally some spare time to have a look. The bearings had failed, so much so that the wheel must have spun ...
3
votes
4answers
771 views

Breaking spokes on adult tricycle

My mother is 60+ years old and 200+ lbs. She never learned to ride a bicycle, so she rides a Schwinn Town & Country adult tricycle. She loves it and rides it everyday, 2-5 miles everyday. The ...
1
vote
1answer
2k views

New wheel for 700x23c tire

I need a new wheel for my bike. I do not know how to tell what the rim size is. My tire size is 700x23c. It is my back wheel. I tried to have it trued which started breaking the rim. Rim finally broke ...
2
votes
2answers
825 views

Any wheel on any fork / frame?

I have been braking for a bit too long with worn off brake pads on not so new rims so I basically killed them. I currently have the stock wheels of an FX Trek 7.2 bike. I will most probably change ...
6
votes
4answers
573 views

Comparing gear ratios on different bike types

How can I compare gear ratios on different wheel sizes? How can I compare gear ratios on MTB with tracking bikes with bigger wheels? How can I compare gear ratios with gear hubs?
3
votes
2answers
569 views

Why are hand-built wheels considered to be better than machine-built wheels?

Why are hand-built wheels considered to be better than machine-built wheels? I would think that a machine-built wheel would be better and cheaper, since machines generally do a more precise job than ...
8
votes
1answer
2k views

Touching the front wheel with my foot when turning

My girlfriend got a new city bike today and she touches the front wheel every time she has to make a hard turn. Is there anyway to avoid this besides replacing the whole bike? LATER EDIT: I think I ...
0
votes
2answers
2k views

Rear wheel stuck (not moving)

I have a Mongoose XR-150. Just brought it from Craigslist a month ago. Suddenly while biking today, the rear wheel got jammed. It just stopped moving, however hard I tried to pedal. Immediately ...
20
votes
5answers
2k views

Spokes keep breaking - bad hub or bad build?

Background information A bit of background information (I'll try keep it brief): Last year I bought an old but unused bike, 5 speeds with internal gearing. Apparently the shop bought a lot of bikes ...
2
votes
2answers
512 views

Time Trial/ Tri Aero Wheels Query

I am in constant debate with my colleague regarding the use of aero tt/triathlon wheels (82/101) for normal/general road use (fear of buckling etc?). I was wondering what peoples thoughts were on ...
1
vote
1answer
559 views

Are these Xero Lite XSR-3 Wheels suitable for cross riding / racing?

I have a set of Xero Lite XSR-3 Wheels. I tend to ride dirt, gravel, and some singletrack on my cross bike and sometimes some cross races. Would I be able to swap this wheelset on to my cross bike ...
5
votes
3answers
1k views

Can I run rim brakes on a disc rim?

I'm trying to buy a front wheel which will work with both disc and rim brakes so that I can use it on my cross bike (with rim brakes) and my mountain bike (with disc brakes) with a dynamo hub to power ...
2
votes
1answer
320 views

What is a modern equivalent to “fir el 201” rims

What is a comparable modern-day rim to these "fir el 201" rims? I believe they came stock on a 1996 Bianchi Eros. I need to replace the rims, and I am trying to gauge the quality that I am used to ...
4
votes
1answer
892 views

Putting wider wheels on a hybrid bike

I've recently had a bike donated to me by a friend so I can start commuting to work. It's a hybrid style bike, and uses 700x32C tyres. My ride to work is along a pretty bumpy, muddy canal path and my ...
3
votes
1answer
287 views

How much does nipple choice affect wheel weight/stiffness?

Would I be a fool to replace the nipples on a Dura Ace 7900 C24 wheelset with a set of DT Swiss anodised alloy nipples, in the interest of aesthetics? I want the bike to look nice, but don't want to ...
2
votes
1answer
400 views

Suspension Fork Axles

I'm looking to upgrade my suspension forks from Rock Shox Dart 3 to something like Rock Shox Sektor RL. A lot of the forks have either a 15 or 20 mm axle, or 'Maxle'. What does this mean? Will this ...
1
vote
1answer
244 views

Calibrate Tensiometer

I want to calibrate my Park Tool TM-1 for my weird spokes. I want to build a box with some kind of weight mesuring device where a spoke can be put under 1600N of tension. Rummers on other boards say ...
3
votes
2answers
665 views

Sounds like there is stickiness on my tire, but there isn't!

I noticed starting yesterday my front tire has been making a strange sound. It sounds like there is a small piece of tar stuck to the front tire and it makes a faint noise of sticking and unsticking ...
2
votes
6answers
2k views

How does a two wheel drive bike work?

A two wheel drive bike is a bike without a motor that can still turn. The front and back wheel both get power. How does a bike with this type of drivetrain work?
2
votes
2answers
822 views

Tensioning rear wheel?

Tensioning a front wheel is - at least in theory - very simple: Go around and tighten each nipple by e.g. a quarter turn. Then re-adjust trueness if necessary. I guess if I'd do the same to a ...
6
votes
1answer
910 views

What causes a wheel to suddenly go out of true?

This morning I noticed that my wheel was suddenly out of true and rubbing against the brake pad at one point. My first guess was that I had broken a spoke, but all of them seem to be intact. A few ...
5
votes
2answers
3k views

Spoke tension is way off but wheel is true, How do I fix this

After truing my front wheel, it seems that it is laterally true. However, the spoke tension seem very uneven, with a few spokes that are very taut next to other spokes which are more loose. If it ...
6
votes
4answers
2k views

How effective is checking spoke tension by ear?

Sheldon Brown's Wheelbuilding page links to the article: Check Spoke Tension by Ear. Obviously a tensiometer would be ideal, but Sheldon suggests that checking spoke tension by ear is a reasonable ...
3
votes
1answer
5k views

A general explanation of rim, tire and tube specifications

My bike's manufacturer page specifies that it has a rim size of 700CX14GX36H. It provides a tire size of 7X28C. It also mentions that it uses high performance 700C tires, which I think is also ...
3
votes
2answers
1k views

How do you evaluate a wheelset?

I'd like to upgrade my wheels but beyond the price, I'm not sure how to compare different options or even to tell if a given wheel is an upgrade or a downgrade from my current wheelset. I'm looking ...
2
votes
1answer
418 views

Front wheel inexplicably misaligned

I have a Civia Bryant which I ride around the city and to work everyday. Yesterday, while walking the bike into my apartment building, I noticed that there were noises coming from the front wheel. ...
7
votes
6answers
5k views

Does a 700c wheel help you go faster?

Someone suggested going with a 700c wheel to go faster, and after thinking about it I am wondering if a larger wheel actually does go faster. I understand that your gears will cause a wheel to rotate ...
3
votes
2answers
233 views

Front wheel getting misaligned while climbing hills

I've got a single speed bike with bullhorn handles. When I'm climbing steep hills I pull on the bullhorns quite hard, and once I'm back on a flat I'll occasionally find that the front wheel has become ...
4
votes
2answers
8k views

How do I know if I can replace the 27 inch wheels with 700c wheels on my bike?

I recently purchased an 80's Japanese bike off craigslist called "Jupiter King." It has 27 inch tires but I want to switch to 700c for greater wheel/tire selection. I specifically want some nice ...
3
votes
1answer
207 views

Am I going to do any damage by swapping cassettes frequently?

I've got a separate wheelset for cylocross riding and road riding. Would it be detrimental to the life of my cassette or hubs If I swapped the cassette between my road and off-road wheelset ...
2
votes
1answer
3k views

Can I fit slightly different tyre sizes

My current bike tyres are 26 x 2.0 (Manufacturer fitted tyres) Is it possible to fit 26 x 2.1 or 26 x 1.95 on these wheels or is this going to cause an issue?
2
votes
2answers
4k views

How to Inflate Tires

I recently got a new beginners road bike: http://www.amazon.com/Takara-Kabuto-Single-Speed-Road/dp/B004W8LG1S/ref=cm_cr_pr_product_top And an air pump: ...
4
votes
2answers
1k views

I assambled rear wheel hub, but now rear wheel is not turning freely

I disassambled/assambled rear wheel hub, but now rear wheel is not turning freely, what have i done wrong?
0
votes
1answer
188 views

How to buy machine-built wheels for a touring bike?

I may be in the market for a wheelset for my touring bike, a 2004 Jamis Aurora. I know very little about buying wheels; what are the things I should consider? I don’t need anything fancy, and I’d like ...
0
votes
2answers
9k views

I need help replacing my bike's tube

I recently popped the tube in my front tire and need help replacing it. I don't really know very much about bikes or the assortment of numbers on tubes, tires, and wheels. Here is what I do know: The ...
7
votes
5answers
7k views

Deep-Profile Carbon Wheels — How to choose depth?

I'm doing research for a future purchase of new wheels (for everyday riding) for a 2012 Cannondale CAAD10 Ultegra. I want to spend ~$1000 (give or take $200 or so). In my price range I've found: Boyd ...
-2
votes
1answer
1k views

What alternative spoke lacing patterns exist (that make a decent wheel)? [closed]

I'd like to know of all the 'normal' ways to spoke a wheel. Currently, if you want to use a non-standard pattern, you have to run the length computations a number of times; for example, in a 3-spoke ...
7
votes
3answers
5k views

When should a wheel be replaced?

I an not talking about upgrading. How do you know when to buy new wheels because the other ones have worn out? How do you tell a wheel is worn out? I can always true a wheel back to true. And nothing ...
3
votes
3answers
2k views

Can I lace my hub with all inward or outward facing spoke heads?

It seems conventional wisdom says to alternate inward vs outward spoke heads going around the flange when lacing a wheel, like this: However, I'm wondering what the reason for this is, and if it ...
2
votes
2answers
1k views

Oil/Anti-seize on outside of nipple when building a wheel?

I just took apart my old wheelset which let some delightful snaps out as I loosened the nipples that were seized to the rims. I'm wondering what the benefits would be of a small amount of anti-seize ...
7
votes
3answers
3k views

Why offset the rear rim to the hub and not the hub in the frame?

I'm currently reading The Bicycle Wheel by Jobst Brandt, and I'm reading all of the issues with offsetting the rear rim toward the drive side of the hub... Asymmetry in a rear wheel built for a ...
2
votes
2answers
257 views

Wheel Build Questions for Those who have done it

To the experienced builders. What are the absolutely neccessary tools to build a reliable trued wheel? The wheel will be a 700c wheel for a standard road bike.
2
votes
2answers
258 views

Wheel spokes missing

I have 5 spokes missing. Is it OK to ride on it, and how long will it last, or will my wheel just break on me? I will be going to work on it every day.
5
votes
10answers
6k views

What should I use, VeloPlugs, Rim Tape, or Rubber Rim Strips in new wheels?

I'm building two new sets of mountain bike 26" wheels, and I'm wondering what to go with. Both are double walled rims, so in addition to the standard rim tape and strips, I can use a product like ...