785 reputation
413
bio website
location Brazil
age
visits member for 3 years, 3 months
seen Jun 4 at 23:05

Jul
27
awarded  Popular Question
Jul
2
awarded  Curious
Jun
11
awarded  Yearling
Jun
4
comment Which rim tape for 700x28 tires?
ok, i looked to buy those... there are a million types and i have no idea which one i need before I take my tire out :( and i only want to do that when i'm ready to put it back on and not remove it until the next flat :) will use tape this time and see if i remember to take notes for the future. thanks
May
30
comment Which rim tape for 700x28 tires?
i know all that :) just want to know if a tape width of 17mm on a rim that i can measure the outside as over 23mm will be too thin and move around exposing a nibble or not... don't want to 1. remove tire. 2. buy tape. 3. measure and see it is not a good fit.
May
30
comment Which rim tape for 700x28 tires?
Nice! never heard of those before... but don't see how they protect around the steam (not that tape does a great job there either)
May
30
comment Which rim tape for 700x28 tires?
@Blam sorry, i wrote tire there by mistake. just meant 700c rims.
May
30
asked Which rim tape for 700x28 tires?
Apr
20
comment derailleur P-screw/B-screw does absolutely nothing
very good point! I did not check the spring strenght when i renewd the derailleur. I am using it as is and set it up so that it only grinds in the very lowest combinations (which i rarely use for my comute).. but as soon as i have to open it up again for lube/mud removal, i will surelly check it up and update here if that was the case.
Mar
12
answered attaching seatpost acessories to rear of racks?
Mar
10
comment attaching seatpost acessories to rear of racks?
The light i have looks like it is planet bike, but it is not. it is just 1mm too deep and 0.5mm too thin. damn china.
Mar
7
comment attaching seatpost acessories to rear of racks?
after trying both options from Daniel i'm now considering 3d printing... :/ sucks that there are no standards for those things. Damn all those companies.
Mar
7
revised attaching seatpost acessories to rear of racks?
added 228 characters in body
Feb
12
comment derailleur P-screw/B-screw does absolutely nothing
@joseph_morris ok, came back at this, again :) last time i adjusted the H and L screws as best as I could. and really, the cogs only grind now when using lowest in front and lowest in back. so i was avoiding this [in the 2 times i was able to ride since then :(] and well, the b-screw is still screwing me. everything seems perfect, but it does nothing. it sits in the correct place on the frame just fine. I think i will have to open the derailleur... but i think for the trouble, i might get a new one... well, i will just avoid the climbs for now :)
Feb
4
asked Custom/universal clamp/attachment for light on rear rack
Feb
1
comment Upgrading Bicycle Gearing
bicyclepointofview.blogspot.com/2013/10/…
Feb
1
comment Upgrading Bicycle Gearing
eek! i'd avoid having a shifter lever right where i'd grip to break in a panic. I pass.
Jan
29
comment derailleur P-screw/B-screw does absolutely nothing
@DanielRHicks see the second paragraph here parktool.com/blog/repair-help/… " If the pulley is rubbing against this cog, tighten the B-screw to increase upper pivot spring tension, which pulls the pulley back and away from the cog" what happens in my case, is, no matter what i do with the B-screw, the distance from the pulley and lowest cog remains the same. the arm never moves when i change the B-screw.
Jan
29
comment derailleur P-screw/B-screw does absolutely nothing
@DanielRHicks they run with only the chain links separating them. The noise cames from the chain axis passing between. It is very possible, hence the Raison d'être of the B/P-Screw. It is there just to adjust the guide being closer to the gear but not touching. Also, i am starting to think it does not matter much. I will only have low gear front and rear when i'm pedaling as slow as possible anyway... don't think anything bad will happen if i leave as is....
Jan
29
comment derailleur P-screw/B-screw does absolutely nothing
@DanielRHicks the guide gear on the derailleur arm grinding on the low gear of the freehweel. almost like the picture. it makes a loud clicking noise that i don't hear on higher gears.