3,193 reputation
1817
bio website velostrigiformes.tumblr.com
location Portland, ME
age 27
visits member for 2 years
seen 10 hours ago

I'm fascinated with bicycles...with how they work, how they're built, how they're used, and what they have to offer. I'm pursuing an MS in Civil Engineering specifically to design and construct cycling infrastructure for transportation planning.

I have worked with several bike-share programs providing free access to bicycles for students, workers, and retirees. In addition, I volunteer as a bicycling safety advocate with local schools.

I appreciate lugged steel, leather saddles, Bridgestones, and pink bar tape.

My next big goal is a cross-country ride from Maine to California.


Apr
10
awarded  Yearling
Apr
6
reviewed Reject suggested edit on Bike position - Town bike
Mar
21
comment loose spoke that will not screw back in
Are you turning the spoke or the nipple? Are you turning it the right way? Have you read any pertinent how-to's? (sheldonbrown.com/tooltips/truing.html)
Mar
16
comment Bicycle Storage: Does Kvartal method need studs (or other suggestions)?
I'd also stick something to the wall where the saddle contacts the paint so as to not have bits of white paint stuck to your saddle...maybe a piece of fabric or something? (Latex paint has a tendency to stick to stuff and peel off the wall if you're not careful.)
Mar
16
answered Bicycle Storage: Does Kvartal method need studs (or other suggestions)?
Mar
12
comment Shimano MF Z012 replacement Freewheel?
I've found IRD and some Shimano cassettes to be of respectable construction. They're not as refined as cassette technologies, but they're out there. (Though, I suppose when it comes down to it modern freewheels won't obtain the same quality as older ones simply because they're considered an outmoded technology. It's the way of the world, I suppose.)
Mar
10
awarded  Constituent
Mar
9
comment Sheldon Brown's writing?
I think Sheldon would encourage people to read everything with a critical eye and to make up their own minds about what works for them.
Mar
4
reviewed Approve suggested edit on How to determine if my rear axle is bent?
Mar
4
awarded  Caucus
Mar
1
comment Mountain Biking Websites
You're asking for websites about mountain biking? Like, product reviews, forums, and the like?
Feb
25
comment What are the advantages of a custom frame for a touring bike?
What is your experience touring?
Feb
25
reviewed Approve suggested edit on What is needed to change a set of wheels? + advice RE the cassette size
Feb
22
reviewed Approve suggested edit on Can anyone identify this Tandem bike I restored from a junk yard?
Feb
13
comment How can I prevent or mitigate the front wheel coming off the ground when climbing steep hills?
I second the pedaling smoothly approach. Good form saves lots of trouble.
Feb
9
comment How to mark a tire
Just brainstorming... but indelible labels on the inside of the tire might be an option. You could use a punch-type label maker that makes raised lettering and stick that to the inside of the tread (I should think the thickness of the label wouldn't be noticeable and the adhesive wouldn't damage the rubber too badly, but I've never done it.) Do you really need to be able to read the label with it mounted on a wheel?
Jan
27
comment Upgrading a GF Tarpon to 650B wheelset
650b wheels for rim brakes aren't terribly uncommon. They're used in smaller sized road bikes and for rando/touring bikes and are gaining in popularity. You won't see big fat rims on them, but if you're riding big fat tires you're already one foot into the world of disc brake-equipped mountain bikes.
Jan
26
comment What kind of crank extractor do I need
It's probably an 8mm hex bolt with the black plastic cap attached. It should come right out leaving the crank in place.
Jan
26
comment What kind of crank extractor do I need
Remove the crank bolt and dust cap. That is what one would really need to see (i.e. the end of the BB spindle... square, spline...)
Jan
23
comment What kind of pump/attachment do I need for this? (picture)
That sure looks like a schraeder valve to me. You're sure the pump head is set up correctly?