3,319 reputation
945
bio website
location Bulgaria
age
visits member for 2 years, 5 months
seen 7 mins ago

1d
comment If a derailleur cable snaps on a long ride, how can I keep going?
Always easier with a video.
Sep
26
comment How to select gearing for descent?
Let us continue this discussion in chat.
Sep
26
comment How to select gearing for descent?
@Blam, watching races in youtube, everyone does as you suggest - spin very fast on the flat sections. I need to rethink my question. It certainly feels more comfortable to give a short, firm push, instead of a whole spin, in some situations.
Sep
26
comment How to select gearing for descent?
The idea is not that you can go faster through an 1/4 turn in a difficult gear, but that you will be in a better position to recover is case of surprise.
Sep
26
comment How to select gearing for descent?
@Blam, you are tearing down, trying to evade BB-hight size stones. Pedals are level, twisted at each stone to put the crank, that is close to the stone, up. Then you have several meters of cleaner singletrack, followed by another set of obstacles or a turn. Do you risk a full turn of the cranks? If the gear is difficult, you can make a 1/4 turn and still be around horizontal, ready for turns or impact avoidance. Or maybe my description is just stupid :D
Sep
26
comment how to translate MTB wheel specifications?
@DWGKNZ, but it is confusing. Things should get measured and specifically checked, not 'assumed'. Heck, I purchased a complete groupset and the FD didn't fit the build!
Sep
26
comment How to select gearing for descent?
To clarify, this question is about shifting. Selecting gear ranges of components is a function of the intended uses of the bike and out of scope here.
Sep
26
comment how to translate MTB wheel specifications?
Aaand we have 148mm rear length.
Sep
26
comment how to translate MTB wheel specifications?
Why is this answer downvoted? IMHO this is the best answer to the question so far, the other one recommending to 'assume' things.
Sep
26
reviewed Approve suggested edit on how to translate MTB wheel specifications?
Sep
26
asked How to select gearing for descent?
Sep
26
comment Why the solid 12mm rear axle?
I can only speculate than in 2-3 years time the industry will "invent" the hollow rear axle. However, I have faith that the bike market competative, at least when hubs and frames are concerned!
Sep
26
asked Why the solid 12mm rear axle?
Sep
25
revised How to select a cyclocross bike at around £800
edited title
Sep
24
comment Why is it important to keep equal number of turns when building a wheel?
Indeed. Whatever, this seems to be a complex issue, not easily solved by someone on the internet. Probably because the sensor (me) is a source of noisy and incorrect information. I'll post if I learn more about this discrepancy.
Sep
24
comment Why is it important to keep equal number of turns when building a wheel?
So, in theory, if the rim I start from is wrapped, but the spokes are the correct length, following the rule of equal turns should actually straighten up the rim (in the perfect case making subsequent truing of the wheel unnecessary)?
Sep
24
comment Why is it important to keep equal number of turns when building a wheel?
@Blam, no I stopped after some spokes got really tight (tighter than on another, quality wheel) and just made the tension on all spokes equal, without regard to number of turns. This included tightening some spokes 3-4 full turns. I will bring the bike to a mechanic and ask them what they think over a beer. Thanks guys!
Sep
24
comment Why is it important to keep equal number of turns when building a wheel?
@Blam, a sane conjecture, but it conflicts the "thread all spokes until just no more thread is visible, from there on you have no frame of reference, then do equal number of turns". I think I will follow it for the rear wheel!
Sep
24
comment Why is it important to keep equal number of turns when building a wheel?
I did 1) tighten all spokes to within 4 threads showing then 2) tighten all spokes so that threads just disappear then 3) go round the wheel two times doing half a turn on each spoke. The result was some tight spokes, and some wobbling. Both wheels are dished.
Sep
24
comment Why is it important to keep equal number of turns when building a wheel?
@Jahaziel, furthermore, as per Sheldon, one can hammer the leading spokes to bend them at the hub, bit cannot access the trailing spokes on the inside of the wheel. I am confused because both sources (Especially Mike) stress the same number of turns very much. Do a Ctrl+F on his site for "go round 5x doing half turns".