network profile
| bio | website | |
|---|---|---|
| location | ||
| age | ||
| visits | member for | 7 months |
| seen | May 17 at 20:54 | |
| stats | profile views | 2 |
|
Apr 30 |
comment |
How do I tighten up my headset? Eventually as you tighten the locknut, the friction between the locknut and the adjustable race will cause the adjustable race to tighten down against the upper head race. You want to avoid this. The goal is to tighten the locknut and the adjustable race against each other. To do so, you'll need to hold both pieces. |
|
Apr 29 |
awarded | Critic |
|
Apr 29 |
answered | How do I tighten up my headset? |
|
Apr 25 |
answered | Can anyone identify this frame? |
|
Apr 22 |
comment |
How to repair shifter housing #2: two part epoxy GLUE. Works similar to your putty,but it's liquid and will fill in the crack better w/out a big mess. My fav is bit.ly/15BMkQg Any time you use glue RTFM cause you only get one shot |
|
Apr 22 |
comment |
How to repair shifter housing Be careful. You probably don't want to use a putty. It will be "glopy" and bulky and won't hold very well. You have two options that will make a cleaner bond. 1. try some acrylic joiner. you put the pieces back together and then "drip" the acrylic joiner around the crack and it wicks into place. This might not work (depending on the type of plastic of the cover.) However, if it doesn't work you can just wipe it away and move on to #2. |
|
Apr 18 |
answered | What's the foot retention used by pro track cyclists? |
|
Apr 18 |
comment |
How can I tell what frame model/year this bicycle is? can you clarify: is the picture of the bike you are talking about or a picture of what you have guessed the bike to be? |
|
Apr 18 |
answered | How to repair shifter housing |
|
Apr 18 |
answered | What Shimano jockey wheels are compatible with my old Shimano 105 9-Speed Derailleur? |
|
Apr 18 |
comment |
What Shimano jockey wheels are compatible with my old Shimano 105 9-Speed Derailleur? Shimano is good about putting model numbers on their stuff. What exact model number is your rear derailleur? It'll probably be a RD-5xxx. |
|
Apr 18 |
answered | How to replace a Sturmey Archer's cable? |
|
Jan 28 |
comment |
Solutions for a slightly loose crown race you should accept the answer to your own question =P |
|
Jan 16 |
answered | Do shops that sell used bikes normally also sell used parts? |
|
Jan 16 |
awarded | Supporter |
|
Oct 11 |
awarded | Teacher |
|
Oct 7 |
answered | Securing sliding bar grips without hair spray? |
