I have a brooks champion flyer, sprung saddle which I have used in the past for touring on a converted mtb.However, I have read recently on Sheldon Brown that they are best suited to bikes where the handlebar is higher than the saddle. Is there a recommended bike setup or limit for handlebar to sandle height difference for using this saddle? I've got this in my head now and I cant remember the difference between handlebars and saddle I had when I was using the saddle for touring. Now I want to use the saddle for commuting but my mtb has a different cockpit set up and wanted to get third opinion!
asked Oct 15, 2018 at 9:37
-
If it's not too wide and doesn't chafe on the inside of your thighs then the only disadvantage is that this saddle is probably much heavier than a narrower, unsprung one.– MichaelOct 15, 2018 at 13:39
Add a comment
|
1 Answer
I assume you are talking about this page: https://www.sheldonbrown.com/saddles.html
I think what Sheldon is saying is that upright riding positions - with the bars level with or higher than the saddle - would benefit from a sprung saddle. I don't see anywhere where he says spring saddles are not suitable for use with lower bars.
If you like the saddle and it works on your commuting MTB go ahead and use it.
answered Oct 15, 2018 at 12:11
-
1fair enough, I could also wear my speedos for cycling if I liked it, but it isn't what they are designed for. Oct 15, 2018 at 12:14
-
@AndrewWelch: If it works for you, go for it. The "official gear" is what many cyclists have found works for them. If you are having fun riding with the gear you have, why change? I wear bike shorts but many of my jerseys do not have pockets. I wear a waist pack to replace the pockets. It works for me, but I am not promoting that approach for others. Oct 16, 2018 at 4:22
-