added 319 characters in body
Source Link
paparazzo
  • 15.5k
  • 2
  • 27
  • 59

Hit it with a bigger wrench. Right side should have normal threads.
CNC Pedal Rod

I would try a bigger wrench before drilling it out. You have to drill exactly in the center. You will need a press.

If the pedal bent there is a pretty good chance crank was damaged. If the threads are just marred up a bit you might be able to clean them up by running a fresh pedal through from the inside.

Hit it with a bigger wrench. Right side should have normal threads.
CNC Pedal Rod

Hit it with a bigger wrench. Right side should have normal threads.
CNC Pedal Rod

I would try a bigger wrench before drilling it out. You have to drill exactly in the center. You will need a press.

If the pedal bent there is a pretty good chance crank was damaged. If the threads are just marred up a bit you might be able to clean them up by running a fresh pedal through from the inside.

Source Link
paparazzo
  • 15.5k
  • 2
  • 27
  • 59

Hit it with a bigger wrench. Right side should have normal threads.
CNC Pedal Rod