Timeline for Front derailleur cable touching frame?
Current License: CC BY-SA 4.0
9 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Feb 18, 2022 at 3:00 | history | tweeted | twitter.com/StackBicycles/status/1494506958900051969 | ||
| Feb 14, 2022 at 19:28 | comment | added | nammerkage | I tried another combination. I simply had to move the slot of the guide.. Thanks guys! | |
| Feb 14, 2022 at 19:26 | vote | accept | nammerkage | ||
| Feb 14, 2022 at 4:45 | answer | added | Nathan Knutson | timeline score: 3 | |
| Feb 13, 2022 at 22:58 | comment | added | MaplePanda | Definitely do not use it as is, because the cable is going to cut straight through the weld. | |
| Feb 13, 2022 at 18:32 | comment | added | Michael | Or maybe the plastic guide is installed the wrong way around? Can you come up with any combination where neither cable rubs anywhere? | |
| Feb 13, 2022 at 18:09 | comment | added | Criggie♦ | Did you get the sides right? I mean - should the wires swap channels in the under-BB bracket ? | |
| Feb 13, 2022 at 16:05 | comment | added | Noise | it should probably be inside a sleeve for that section, that you can get quite easily. A better guide with a longer tongue would be the preferred choice though. | |
| Feb 13, 2022 at 15:01 | history | asked | nammerkage | CC BY-SA 4.0 |