Timeline for Tightening steerer expander/compressor and spacer positions with a carbon fork
Current License: CC BY-SA 4.0
4 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Oct 15, 2023 at 20:08 | comment | added | Vladimir F Героям слава | At least I think that the steerer was OK. I have later had the fork replaced for warranty but because of a droput issue, not because of the steerer. | |
| Oct 15, 2023 at 19:58 | comment | added | conste | Thanks for that. I wanted to add some information that this clamping is also related to the specific expander design from Cannondale. I know that I didn't provide a real answer because no one can tell if clamping the stem without the expander will create damage. Cannondale definitely says the expander is needed for the structural integrity of the steerer. Your image with the bottomed out stem could also be indicative for a crushed steerer. I just wanted to point that out. | |
| Oct 15, 2023 at 18:39 | comment | added | Vladimir F Героям слава | I moved one spacer above the stem, so moved the stem little bit lower. The steerer was fine. Note that your answer may be deleted because it does not really answer the question. | |
| Oct 15, 2023 at 17:25 | history | answered | conste | CC BY-SA 4.0 |