Timeline for Should square taper cranks be greased before installation?
Current License: CC BY-SA 4.0
6 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| May 29 at 6:46 | comment | added | Burki | From looking at this, and in combination with @olliebulle 's answer, i'd say the grease in the picture will grease the bolt's threads, but not the spindle interface, since it will only be spread once the crank sits on the interface, which should prevent any meaningful amounts of grease to get between the spindle and the crank at the interface. | |
| May 29 at 2:21 | review | Late answers | |||
| May 29 at 3:38 | |||||
| May 29 at 2:05 | history | edited | Chris E | CC BY-SA 4.0 |
Added image
|
| May 29 at 2:03 | history | edited | Chris E | CC BY-SA 4.0 |
added 86 characters in body
|
| S May 29 at 1:59 | review | First answers | |||
| May 29 at 19:37 | |||||
| S May 29 at 1:59 | history | answered | Chris E | CC BY-SA 4.0 |