24

I see enough folks wearing helmets in such a manner that they might as well not be. What is the proper way to fit & wear a bicycle helmet?

5 Answers 5

23

This image has kicked around the net for a while - IDK what the original source was:

alt text

Otherwise, I second the guidance and link provided by @fady.

17

Snug! It wont work if the helmet is not securely strapped to your head. Here is a good article/post about wearing helmets.

You want the helmet to be comfortably touching the head all the way around, level and stable enough to resist even violent shakes or hard blows and stay in place. It should be as low on the head as possible to maximize side coverage, and held level on the head with the strap comfortably snug.

http://www.bhsi.org/fit.htm

1
7

My summary of helmets.org's fitting tips:

  1. Size the shell to your head by using/removing the (comfort) pads. Different helmets are made in different sizes.
  2. Place your helmet level on your head. Typically the front rim of your helmet sits two fingers' width above your eyebrows.
  3. Raise the Y connection of the side straps up to just below your ears
  4. Tighten the chin strap until you know the helmet can not move or rotate without your head coming along for the ride (but make sure you can still speak, drink from your water bottle, and so on)
1
  • 1
    Your helmet should not move or rotate even without the strap if it is sized correctly. Ideally, the chin strap is purely to keep it from coming off of your head. Commented Aug 29, 2012 at 16:28
5

Coincidentally I brought my kids to a local bike safety event this weekend. The rules they prescribed were: (1) If you look up you should be able to see the front of your helmet, (2) The straps should form a "V" around your ears, and (3) When you open your mouth you should feel the helmet push down on the top of your head.

4

First, buy a helmet of a size that fits your head (you should not be able to put a finger between your head and helmet).

Then adjust the straps binding just below the ears and then adjust the length of the strap under your chin so that you are able to move your head comfortably without tightening.

is important that your front is not see, even when trying to move the helmet forward and back (Gary's picture).

-- google translated

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.